OMG.. bro you are lucky.. the place where you met .. is very accident prone area.. (name of the location is Rajokri underpass U turn)....

I saw many many fatal accident on that point... ...

Yes, Rajokri is the name of the place.. Thanks for pointing it out.. i seriously am lucky.. had I been a little faster, he would have T-boned me and God knows what might have happened in that case..

At-least I know there are angels in disguise in this world. Had it not been to that Mechanic, I don't think I would have made it to the Doctor on time. It was bleeding profusely..
@kmk0311 Thanks a lot brother Lesson learnt.. this is India, I can't expect people to obey the traffic rules..

I hear faint knocking type of sounds in long B2B traffic, like 2 hours of crawling traffic. I obviously DO NOT lug the engine.

Does it go away with load ?

How to identify a worn out timing chain?

Align crank to TDC mark, and observe through timing chain inspection window, the marks on both sides of the cam sprocket should be aligned with the head.

I recently purchased those chinese after sale adjustable levers and I have the habit of keeping my index fingers inbetween the lever and the handle.. the levers are too sharp due to the impact my finger got cut.. Thanks to the Dainese Leather gloves my finger wasn't chopped off..

I got the levers changed back to stock and I realised my foolishness.. Stock is always best..

I am fine and my finger is recovering.. the flesh has been removed upto the nail and the nail has been completely removed.. hoping to recover in weeks time..

P.S Please don't go for those crazy adjustable levers...

If t would have been carburetter bike then it would have been from 35k kms.

P
After i reached home, I was wondering how only my index finger got cut and nothing happened to the other fingers..

I recently purchased those chinese after sale adjustable levers and I have the habit of keeping my index fingers inbetween the lever and the handle.. the levers are too sharp due to the impact my finger got cut.. Thanks to the Dainese Leather gloves my finger wasn't chopped off..

I got the levers changed back to stock and I realised my foolishness.. Stock is always best..
..

P.S Please don't go for those crazy adjustable levers...

Pheewww Get well soon sir
I was about to get those levers for my bike as the stock clutch lever is way far from handle bar and have short fingers 
This post changed my mind ..


Sent from my YUREKA using xBhp Connect mobile app

Replies in ​BOLD.

Phew, after a long time xbhp is back to somewhat normal.

Ok, so I was on my way for an interview last weekend in Gurgaon.. I was nearing the toll booth and I got a call from a friend saying he met with an accident. I asked for location and he was some 6-8 kms from where I was.. I took a U Turn and picked up speed.. riding at 90-110 kmph.. there is a place for U turn under a bridge and I slowed the speed to 75 kmph and I saw a car taking a U turn.. Thinking he saw me, I didnt slow down. That idiot took the U turn and started crossing the road without seeing if any vehicle is coming.. i pulled the brake levers tightly and managed to slow the vehicle to 30 kmph but that wasn't sufficient.. I T-boned the car.. I was so angered and frustrated. I picked my bike up and took it to the side.. checked for damages to my bike and found it negligible.. then i noticed my right index finger paining.. I pulled out the gloves to find the finger cut (deep) from right till the bottom of the nail bleeding heavily.. I was so outraged I wanted to punch the guy on his face.. The guy comes out of his car and starts abusing me. I was like ***king a$$**le, you are crossing the road on the highways without looking to the left on who is coming.. he sees his car and says you have caused me some 4000/- damage.. I showed him my bleeding finger and said look at what happened because of your carelessness.. I urged him to take me to the doctor and he refused and he said that will cost you some 100/- and look at the damage you have done to my car 4000/- I figured out i was wasting time with a loser..

Thankfully, there was a mechanic shed nearby. they all came and the mechanic named "Shankar" took me to the nearby clinic as I wasn't able to move my right hands and was with me till the time I had the small operation on my finger done..

Now since i was given Local Anaesthesia, I didn't have any pain and I was able to ride... I went to meet my friend who met with an accident and his bike was all screwed up and Thankfully he was fine..

After i reached home, I was wondering how only my index finger got cut and nothing happened to the other fingers..

I recently purchased those chinese after sale adjustable levers and I have the habit of keeping my index fingers inbetween the lever and the handle.. the levers are too sharp due to the impact my finger got cut.. Thanks to the Dainese Leather gloves my finger wasn't chopped off..

I got the levers changed back to stock and I realised my foolishness.. Stock is always best..

I am fine and my finger is recovering.. the flesh has been removed upto the nail and the nail has been completely removed.. hoping to recover in weeks time..

P.S Please don't go for those crazy adjustable levers...

[MENTION=57939]sarkartheruler[/MENTION]-

Best of luck for your future.By the way where are you now. Which part of USA.

You will get much better bikes to ride there. Also much better roads there.

But stay in touch here. Tomorrow if you get a bike there and need help for any problem we all are here to help you.

And by the way Hero is also now in america.

You had an immaculate maintained ZMR. If it would have not been in chennai, i would have bought it.

Anyways best of luck for your future.

I am fine and my finger is recovering.. the flesh has been removed upto the nail and the nail has been completely removed.. hoping to recover in weeks time..

Washed my bike and applied 2k rubbing compound on my bike
But the one in tank is not at all coming out leaving patches on my tank and rest of the tank is appearing like its matted
Can anyone help me regarding this on how to get rid of that wax on my bike's tank

----consecutive posts auto-merged-----
@Divya Sharan you too use 2k rubbing compound na
Did u ever face such issue
If yes please tell me a solution for this

----consecutive posts auto-merged-----

Pic of my bike's tank

Who advised using rubbing compound? Which company's rubbing compound was used?
It is very easy to destroy the clear-coat using any cheap rubbing compound. Moreover, did you allow the compound to dry before wiping it (They should not be allowed to dry usually)?
Rubbing compound is used to clear blemishes off the paint (usually scratches, or a lighter compound/polish for swirls).
I hope you've not ruined the paint beyond repair.
What you can still do is (if the compound has only gummed up, rather than left paint defects) is use rubbing alcohol 50:50 with water. Wet a "SOFT" cloth thoroughly. By soft, I mean we don't use those yellow clothes available everywhere, use a proper microfibre cloth. Wet wipe again and again till the gumminess is removed. If the compound has left scratches, you will need to re-polish the paint. Do NOT allow the polish to dry, and do not use rubbing compound again.

What you should have used is any wax after washing the bike.
I'm tagging @sanu916 - Torquoholic, a very skilled bike detailer for his inputs.

Phew, after a long time xbhp is back to somewhat normal.

Ok, so I was on my way for an interview last weekend in Gurgaon.. I was nearing the toll booth and I got a call from a friend saying he met with an accident. I asked for location and he was some 6-8 kms from where I was.. I took a U Turn and picked up speed.. riding at 90-110 kmph.. there is a place for U turn under a bridge and I slowed the speed to 75 kmph and I saw a car taking a U turn.. Thinking he saw me, I didnt slow down. That idiot took the U turn and started crossing the road without seeing if any vehicle is coming.. i pulled the brake levers tightly and managed to slow the vehicle to 30 kmph but that wasn't sufficient.. I T-boned the car.. I was so angered and frustrated. I picked my bike up and took it to the side.. checked for damages to my bike and found it negligible.. then i noticed my right index finger paining.. I pulled out the gloves to find the finger cut (deep) from right till the bottom of the nail bleeding heavily.. I was so outraged I wanted to punch the guy on his face.. The guy comes out of his car and starts abusing me. I was like ***king a$$**le, you are crossing the road on the highways without looking to the left on who is coming.. he sees his car and says you have caused me some 4000/- damage.. I showed him my bleeding finger and said look at what happened because of your carelessness.. I urged him to take me to the doctor and he refused and he said that will cost you some 100/- and look at the damage you have done to my car 4000/- I figured out i was wasting time with a loser..

Thankfully, there was a mechanic shed nearby. they all came and the mechanic named "Shankar" took me to the nearby clinic as I wasn't able to move my right hands and was with me till the time I had the small operation on my finger done..

Now since i was given Local Anaesthesia, I didn't have any pain and I was able to ride... I went to meet my friend who met with an accident and his bike was all screwed up and Thankfully he was fine..

After i reached home, I was wondering how only my index finger got cut and nothing happened to the other fingers..

I recently purchased those chinese after sale adjustable levers and I have the habit of keeping my index fingers inbetween the lever and the handle.. the levers are too sharp due to the impact my finger got cut.. Thanks to the Dainese Leather gloves my finger wasn't chopped off..

I got the levers changed back to stock and I realised my foolishness.. Stock is always best..

I am fine and my finger is recovering.. the flesh has been removed upto the nail and the nail has been completely removed.. hoping to recover in weeks time..

P.S Please don't go for those crazy adjustable levers...