Announcement
Collapse
No announcement yet.
Hero Honda Karizma ZMR
Collapse
X
-
throttle plate free play
My ZMRs throttle dont play freely.
Actually i got a fall on road when a dog suddenly came in between the road
Since then its not working properly
The agency people changed a piece of metal which fits on the side of throttle
Even ater that the problem is not resolved
The agency personnel says its the best he could do.
Need suggestion on this.
Comment
-
yes it is covered under warranty, get it checked at ASC. They will repair it for free and if it is some manufacturing defect, they will replace it for U.Originally posted by samratreddy View PostHi Friends.... What exactly does the Warranty in ZMR cover? I have an issue with my ZMR tank as I see that petrol leaks out from the tank
Is this covered under warranty?
Also would be great if you can tell me the procedure to get it replaced!
TIA
Comment
-
Warranty is 90% on metal and 50% on plastic.Originally posted by samratreddy View PostHi Friends.... What exactly does the Warranty in ZMR cover? I have an issue with my ZMR tank as I see that petrol leaks out from the tank
Is this covered under warranty?
Also would be great if you can tell me the procedure to get it replaced!
TIA
How old is your ride? You can always replace the tank under warranty (if the bike doesn't have a poor record in maintenance and accident-wise).
Talk to the SVC manager and try to build rapport with him. May take a couple of months but you'll spend much less.
Need more info. Try changing both accelerator cables (cables A and B). You can get these done by a trusted roadside mech too.Originally posted by Vivek Yadav View PostMy ZMRs throttle dont play freely.
Actually i got a fall on road when a dog suddenly came in between the road
Since then its not working properly
The agency people changed a piece of metal which fits on the side of throttle
Even ater that the problem is not resolved
The agency personnel says its the best he could do.
Need suggestion on this.
By metal piece along the throttle, do you mean bar end weights?Got a $5 head? Get a $5 helmet.
Because everyone who passes, isn't a martyr!
Bullet Service Guide CBR 250R Parts Manual Fz16 service manual - https://drive.google.com/file/d/0B1-...VFQmJzakk/view
Hero Moto Corp Bikes' Parts RE STD 350 Wiring Diagram (CI) Service Manual - Classic 350/500
ZMR parts - https://drive.google.com/file/d/0B-U...it?usp=sharing
P200NS Spares' prices - https://docs.google.com/spreadsheet/...taGd5R2c#gid=0
Comment
-
I guess Ashwin shared a pic few pages back. It was a black ZMR.Originally posted by Shreeni0403 View PostAnyone running ZMR without the fairing ??Got a $5 head? Get a $5 helmet.
Because everyone who passes, isn't a martyr!
Bullet Service Guide CBR 250R Parts Manual Fz16 service manual - https://drive.google.com/file/d/0B1-...VFQmJzakk/view
Hero Moto Corp Bikes' Parts RE STD 350 Wiring Diagram (CI) Service Manual - Classic 350/500
ZMR parts - https://drive.google.com/file/d/0B-U...it?usp=sharing
P200NS Spares' prices - https://docs.google.com/spreadsheet/...taGd5R2c#gid=0
Comment
-
-
hello guys
i met with an accident today while coming to office.
it was not anybodies fault
it was my fate
there was a wooden slab with nails on it on the road and as i was following a bus i couldnt make it out from a distance so my front tire went on the slab and it skid and my zmr crashed and i fell down on the ground, but the good thing i did was i stood up immediately and looked back for any vehicles but to my luck there was no big vehicles like bus or truck and i was saved as it was tumkur ring road and always trucks or bus will travel in plenty,Gods grace was on me, i was left only with the small injury.
i couldnt lift the bike alone as i was having pain but( i also want to know the technique to lift the bike)
to my surprise nobody came forward to help me lift the bike as Indians really do that but they came after long time when i tried to lift it in various ways.i tried to start the bike but it didnt, i though it may be due to cut off sensor when the bike bends to an angle,i thought it was still on.i tried full throttle method and tried several times,is it a bad thing to do this?
i tried to call the svc but nobody picked and as soon as i called my friend, it started.
the handle of the bike is bent,
what can be done to remove the bend?
my right wrist and leg is paining very badly and i am typing in left hand as i felt like sharing this with you guys to add to this bad luck, i am sitting in office since i didnt tell my manager about my accident.zmrs fairing is really strong, it was left with few scratches and scratches on the exhaust
Comment
-
r u ok? currently using intrnet on mobile. shall post the link to bluevolt's thread where he's shown lifting a bike. get the bent parts changed. don't go for cheap repairs.Originally posted by Praj zm View Posthello guys
i met with an accident today while coming to office.
it was not anybodies fault
it was my fate
there was a wooden slab with nails on it on the road and as i was following a bus i couldnt make it out from a distance so my front tire went on the slab and it skid and my zmr crashed and i fell down on the ground, but the good thing i did was i stood up immediately and looked back for any vehicles but to my luck there was no big vehicles like bus or truck and i was saved as it was tumkur ring road and always trucks or bus will travel in plenty,Gods grace was on me, i was left only with the small injury.
i couldnt lift the bike alone as i was having pain but( i also want to know the technique to lift the bike)
to my surprise nobody came forward to help me lift the bike as Indians really do that but they came after long time when i tried to lift it in various ways.i tried to start the bike but it didnt, i though it may be due to cut off sensor when the bike bends to an angle,i thought it was still on.i tried full throttle method and tried several times,is it a bad thing to do this?
i tried to call the svc but nobody picked and as soon as i called my friend, it started.
the handle of the bike is bent,
what can be done to remove the bend?
my right wrist and leg is paining very badly and i am typing in left hand as i felt like sharing this with you guys to add to this bad luck, i am sitting in office since i didnt tell my manager about my accident.zmrs fairing is really strong, it was left with few scratches and scratches on the exhaustGot a $5 head? Get a $5 helmet.
Because everyone who passes, isn't a martyr!
Bullet Service Guide CBR 250R Parts Manual Fz16 service manual - https://drive.google.com/file/d/0B1-...VFQmJzakk/view
Hero Moto Corp Bikes' Parts RE STD 350 Wiring Diagram (CI) Service Manual - Classic 350/500
ZMR parts - https://drive.google.com/file/d/0B-U...it?usp=sharing
P200NS Spares' prices - https://docs.google.com/spreadsheet/...taGd5R2c#gid=0
Comment
-
i am having wrist painOriginally posted by Divya Sharan View Postr u ok? currently using intrnet on mobile. shall post the link to bluevolt's thread where he's shown lifting a bike. get the bent parts changed. don't go for cheap repairs.
ya do it
i have to get my handle replaced is it, how much does it cost
Comment
-
sorry to note that you had a accident this morning....First of all Take leave and go see a doctor and attend to your injuries IMMEDIATELY.......when you are behind any vehicle always ride your bike in line with one of the rear wheels,to avoid pot holes, or problems like what you have encountered..Originally posted by Praj zm View Posti am having wrist pain
ya do it
i have to get my handle replaced is it, how much does it cost
Get well soonWhen Was The Last Time,You Did Something For The First Time.
Comment
-
thank you sirOriginally posted by psr View Postsorry to note that you had a accident this morning....First of all Take leave and go see a doctor and attend to your injuries IMMEDIATELY.......when you are behind any vehicle always ride your bike in line with one of the rear wheels,to avoid pot holes, or problems like what you have encountered..
Get well soon
ya i will consult companies doc as i cant ride the bike
i should have followed that method
what about the handle bar bend
should i replace it,
what is the cost of the handle sir
Comment
-
thts the reason you haven't been mailing me since the past few days.......bro please get your self checked at a good clinic....!!! and yes preferably get your handle bars changed as if you mend it ....it will get the issue back after some time...so its always better to get the handle bars changed....!!Originally posted by Praj zm View Postthank you sir
ya i will consult companies doc as i cant ride the bike
i should have followed that method
what about the handle bar bend
should i replace it,
what is the cost of the handle sir
look for cracks on your rear break peddle.....right footpeg and front break lever also...!! look for your right front suspension for leakage of fork oil...(possibilities are very low but just incase).!!!...And yeah the fairing of the zmr is of good quality....which is what makes the bike heavy...i have only once seen a fairing break during a fall when a fren banged it onto a divider...!!
Ride safe brother...!!
And here is the link to lift your bike after a spill:
Regards-
-K.D.H
www.facebook.com/groups/rrtourers
" the only thing i believe in after the almighty ....is my bike....."
Mumbai Malvan Mumbai
Rajasthan-road-bound-madness
Ride-vansda-gujarat-national-park
Comment
-
Hopefully you don't have to try this ever - http://www.xbhp.com/talkies/do-yours...ter-spill.htmlOriginally posted by Praj zm View Posti couldnt lift the bike alone as i was having pain but( i also want to know the technique to lift the bike)
Get well & start riding with confidence soon @Praj zmSkill is what keeps you on a Motorcycle
Awareness + Skill is what keeps you out of harm's way
ATGATT + Awareness + Skill means you might Live To Ride another day
Comment




Comment