Let there be Light : Bike Lighting, HID etc

[sammy21]

Hi guys...i need your help pls
I installed 35w HID with projector on Pulsar 200 dtsi (A.C.) from Karol Bagh but after it my self start isn't working
And the wiring is done via a 3 way switch which i don't prefer.
Can anybody guide me how to fix it or can anybody refer me to any good mechanic in NCR pls.

[Stanley27]

Hi guys...i need your help pls
I installed 35w HID with projector on Pulsar 200 dtsi (A.C.) from Karol Bagh but after it my self start isn't working
And the wiring is done via a 3 way switch which i don't prefer.
Can anybody guide me how to fix it or can anybody refer me to any good mechanic in NCR pls.

See if this place is near by to you. performance parts in delhi, performace parts delhi, performance parts in west delhi, performance parts in karol bagh, riding parts in delhi, Bike Modification shop in delhi, Head & Tail lights shop in delhi, HID shop in delhi, projection headlamps in

[sammy21]

See if this place is near by to you. performance parts in delhi, performace parts delhi, performance parts in west delhi, performance parts in karol bagh, riding parts in delhi, Bike Modification shop in delhi, Head & Tail lights shop in delhi, HID shop in delhi, projection headlamps in

Yes it is near by..Thanks a lot Stanley

[sammy21]

35w HID projector on Pulsar 200 (old)
I am happy with the result but as my starter is not working after this mod

Low - Beam



High-Beam

[rajaselvam_1987]

35w HID projector on Pulsar 200 (old)
I am happy with the result but as my starter is not working after this mod

Dude Could you post the pics of your projector
And how much it costs.

[sammy21]

It costed me 3k including fitting and also a year warranty from Karol Bagh (Delhi)

[rajaselvam_1987]

It costed me 3k including fitting and also a year warranty from Karol Bagh (Delhi)

Thanks Friend, what is the name printed on the Box of this projector Kit that means brand & Diameter of this projector Lens

[princesirohi]

@sammy21: i got your PM, so your HID starter is not working, i will try to help, but without physically checking it is very difficult, still i will try-

1) first of all, how do you know, your starter/ballast is not working?? it can also be some other fault. and since you have a warranty, you can get it replaced from the person who sold you the HID kit.

2) check the wiring, it can be a wiring issue, like a loose connection or improper grounding, check battery connection, fuses etc.

3) check relay, frequency of failure of relay is much higher than HID or any other electronic part.

4) check the extra switch your mechanic has installed, it can be faulty also.

5) sometimes bad wiring can cause BCU failure and or RHS and or LHS switches failure. worst case scenario if you have a digital meter pulsar.

6) check battery, battery may be discharged. stock charging ckt. can not power an HID for more than an hour on a continuous run unless and untill charging ckt is modified. so check battery charge level. is you self starter, horns etc working normally??

7) can you post the modified wiring diagram of your bike ...

[sammy21]

Thanks Friend, what is the name printed on the Box of this projector Kit that means brand & Diameter of this projector Lens

Sorry buddy, i have no clue about the brand of HID but it have a slim ballast with two relays.

[sammy21]

@princesirohi : Thanks a lot for your help but my you got me wrong. Actually what i meant was that my HID is working fine but my electric/self start isn't working anymore

Yes i have a digital meter pulsar and its horns and indicator are working fine. I am sorry, i don't have its wiring diagram.

Firstly the mechanic used the original switches to make HID work but in this case HID worked and Self failed. I suppose bike require AC current to start.
Then to fix it he used a 1 way switch which he asked me to switch ON after starting the bike. But he wasn't sure about what he was doing
so, then he used a 3 way switch for HID with which self too worked but it failed when I return back from karol bagh.
So now i am left with push (dhakka) start only

[princesirohi]

ok, sammy21, then the problem is in wiring or extra switch he connected, or handle bar mounted starter switch or BCU. ensure that battery is fine.

otherwise it may be a coincidence and not related to HID, check clutch switch sensor and neutral sensor and or stater relay.

[rajaselvam_1987]

@princesirohi : Thanks a lot for your help but my you got me wrong. Actually what i meant was that my HID is working fine but my electric/self start isn't working anymore

Yes i have a digital meter pulsar and its horns and indicator are working fine. I am sorry, i don't have its wiring diagram.

Firstly the mechanic used the original switches to make HID work but in this case HID worked and Self failed. I suppose bike require AC current to start.
Then to fix it he used a 1 way switch which he asked me to switch ON after starting the bike. But he wasn't sure about what he was doing
so, then he used a 3 way switch for HID with which self too worked but it failed when I return back from karol bagh.
So now i am left with push (dhakka) start only

So what mechanic did is he connected the HID directly to the Battery via 3-way switch. Then how you are using the pass light.
Pulsar is having some complicate wiring.
Have you checked the Fuses,

[mechravi]

i have a question

i have a glamour ,suppose the generator makes 100 watts of power

when headlight is on 50 must be going to headlight and 50 to battery

then when the head lamp is off all this 100 watt must be going to charge battery ?or 50 watts is just wasted

[drvmtm]

i have a questioni have a glamour ,suppose the generator makes 100 watts of powerwhen headlight is on 50 must be going to headlight and 50 to battery then when the head lamp is off all this 100 watt must be going to charge battery ?or 50 watts is just wasted

After the battery is charged the power is wested by short circuit

[Abhisek]

I don't know much in detail about electronic work so need a help
I wnt to know that how can I make normal RED_BLUE LED's flash like police lights, what types of LED's & resistors or any other stuff required, should I use in order to make that on my own.
I know it would sound weird but I want to make it as compact as possible because I want to install that on my HELMET (hope you guys dont laugh ).