Let there be Light : Bike Lighting, HID etc

[kaus07]

oto chinta koris na bhai.
yours is a p 150 2006 model na?thats ug 2, so the upgrading possibilities are there ,same model as mine,only mine is 180.

SO GO FOR AVENGER STATER PLATE(DV111005).just plug and play as u already read before.what it will do it will increse the ac amp only resulting 55/60 headlight bulb.but in low rpm there will be a slight lag when changing to high and low beam.if u want to eliminate that then u have to plonk a avy rr (regulater rectifier).
REMEMBER I USED THIS COMBO FOR MORE THEN A YEAR(ONLY COIL UPGREAD+STOCK PULSY RR),IT NEVER MISSED A BEAT,WORKED LIKE CHARM,NO LOAD ,NOT EVEN A SLIGHT ONE ON ENGINE...........COST OF STATER PLATE 532.00.

thanks a lot bhaai..but dint got the thing u mentioned about the low rpm thing.the one where i have to plonk a avy rr (regulator rectifier) thing.
what do i have to do with it.where do i plonk it an how much does it cost?
how much is according to you the low rpm you mentinoed...

[Dogg]

guys,can i use an osram night breaker h7 55w in the projector of the p220 and osram cool blue h7 55w in the high beam??

[Shreeni0403]

guys,can i use an osram night breaker h7 55w in the projector of the p220 and osram cool blue h7 55w in the high beam??

Yes you can !!

[Coffin On Wheels]

hey guys...
i have a pulsar 220 and the high beam bulb has gone kaput..
i plan to upgrade it to a better bulb( probably whitish ) in the same segment
Nay ideas as to which bulb should I go in for and the cost involved??

[abdelazeez]

hey guys...

i have a pulsar 220 and the high beam bulb has gone kaput..
i plan to upgrade it to a better bulb( probably whitish ) in the same segment
Nay ideas as to which bulb should I go in for and the cost involved??

Go for a Philips 35/35W bulb. Almost all Philips bulbs available in the market are good

BTW that's a boring childish signature that you've got. Do you even realize the meaning of it or are you just a poser boy
?

[Coffin On Wheels]

Go for a Philips 35/35W bulb. Almost all Philips bulbs available in the market are good

BTW that's a boring childish signature that you've got. Do you even realize the meaning of it or are you just a poser boy
?

first of all the p220 uses a 55w bulb...i guess a kiddo like u dosen't even knw this
secondly i very well realize wot the signature means, guess u didn't get it

[drvmtm]

ok, fine no prob let me get the stator plate first.

what about the day time, when the battery will get the charging current but no use of battery apart from the 3 watt break lamp and horn and starter motor. Is there any built in circuit which prevent the overcharge. I heard there is a option in bajaj's gc1000 rr unit. One red cable which will be directly connected to the igi switch and this will monitor the battery voltage and regulate the charging duration. What you say, is that also available with ape rr.

no silly at all,it automatically dripsdown the amps as the battery is charged....aso smile

[Dogg]

Yes you can !!

nice.. already got the iridium's and now these.. and by the way,wat abt those led's in the pilot's to save some watt's?? that night breaker in the projector will be arnd 90% brighter than standard and the cool blue(if i find one),will be 20% more than stocka nd with a lot of white..

[drvmtm]

pictures of my setup.

Well,finally i got some free time tonight and i was ready to click some pictures.took the tripod and went to a darker road best to understand the throw. so here it goes...
all the pics taken in manual mode same setting,no enhancement.
abhi,here is the dark road for you..

bikes headlamp-55 watt phillips xtream power-low beam.

bikes headlamp-phillips extream power 60watt-high beam.

only hid-dcm toyota sealbeam on rx housing mounted on left crash guard.hid info-make ikodo,h4-2 later i removed the halogen and other unnecessary parts,chinease make,no warrenty,35 watt,6000k,wires extended to keep the ballast under the seat,supplied with a heavy duty relay.

hid+high beam

hid+low beam.

the set up.

Original Video-sorry for the poor quality!

<embed width="440" height="420" type="application/x-shockwave-flash" src="http://v5.tinypic.com/player.swf?file=2r723cx&s=5"><br><font size="1"><a href="http://tinypic.com/player.php?v=2r723cx&s=5">Original Video</a> - More videos at <a href="http://tinypic.com">TinyPic</a></font>

[kauria]

^^ Awasome.

[sunny9830687955]

yes simply awesome

[sajjt]

Well,finally i got some free time tonight and i was ready to click some pictures.took the tripod and went to a darker road best to understand the throw. so here it goes...
all the pics taken in manual mode same setting,no enhancement.

only hid-dcm toyota sealbeam on rx housing mounted on left crash guard.hid info-make ikodo,h4-2 later i removed the halogen and other unnecessary parts,chinease make,no warrenty,35 watt,6000k,wires extended to keep the ballast under the seat,supplied with a heavy duty relay.

Hey nice work man, but how did u manage to fix the ballast under th seat and fix the bulb on the crash guard? Normal ballast wire for the bulb is only 50cm or so to take care of the high voltage loss, is it dangling from the seat under the tank?

[drvmtm]

i extended the wires sajjit.

[drvmtm]

^^ Awasome.

thanks kauria.

[drvmtm]

yes simply awesome

thanks dada