Announcement
Collapse
No announcement yet.
Yamaha FZ-16/ FZ-S
Collapse
X
-
hey guys,
going to buy the motul 5100 10w40 semi synth for my fz tomorrow....
can you guys also recommend a hain spray my chain is rusty.... otherwise will have to use the normal greas as used by the mechanic....Timon: Orange Yamaha FZ16 2009
Optimus: Red Mahindra XUV500 W8 FWD 2013
Atom: Red Tata Nano XTA 2016
Pumba: Red Harley Street 750
Comment
-
I've been using normal engine oil on chain and diesel for cleaning for past 13k km without any issue and total cost for that so far is still less than 10% of the canned lube offered by the dealerOriginally posted by kinshuk.arya View Posthey guys,
going to buy the motul 5100 10w40 semi synth for my fz tomorrow....
can you guys also recommend a hain spray my chain is rusty.... otherwise will have to use the normal greas as used by the mechanic....
#RetiredRider
#KeyboardWarrior
Comment
-
thats gr8 cutting.... are they the normal sticker sheet available with the vinyl and flex printers??Originally posted by deville_56 View PostThats hand cut
. Every mods on my bike except the red scoops were done at home.Timon: Orange Yamaha FZ16 2009
Optimus: Red Mahindra XUV500 W8 FWD 2013
Atom: Red Tata Nano XTA 2016
Pumba: Red Harley Street 750
Comment
-
I have been planning on this , but haven't been able to get my hands on the fitting clamp / brackets for it ...Originally posted by deville_56 View PostWill the FZ-S visor alone without the side pieces look good on normal FZ????
, evrytime i go to SVC it's a standard " no stock sir " reply ...
hoping to get this done soon ...
P.S : anybody help me out on the air leakage issue ...
People ask me , why are you cribbing about the BHP ? to them I say "MORE is never ENOUGH" xbhp.com
FZ16 headlight assembly with projector and angel eye for sale .
My first ever trip log ... http://www.xbhp.com/talkies/tourer/1...gh-clouds.html
Comment
-
check for bent rims on the edges ,they may cause the air to leak out sometimesOriginally posted by nand15 View Postyes very much , like mentioned , just a size 10 spanner ... below the headlight , on the assy itself is a the bolt that adjusts the beam , loosen it , turn on the light , focus the beam as per your requirement , tighten it and your done ...
P.S: Guys if u remember i had posted about having an air leakage problem on both my tyres , now I had been to the SVC , told them about it , I made the chief mech there check for puncture , valves and also the rim and he found no leakage , but i'm still having the problem , three days it drops from 28psi to 6 or 7 psi (front) and from 33 to about 14psi (rear)
, really getting annoyed now 
here's the pic of the boltsigpic
finding god is easier than finding hidden spy cameras - Swami Nithyananda
Comment
-
i dont like fz-s' visor....Originally posted by nand15 View PostI have been planning on this , but haven't been able to get my hands on the fitting clamp / brackets for it ...
, evrytime i go to SVC it's a standard " no stock sir " reply ...
hoping to get this done soon ...
P.S : anybody help me out on the air leakage issue ...
Timon: Orange Yamaha FZ16 2009
Optimus: Red Mahindra XUV500 W8 FWD 2013
Atom: Red Tata Nano XTA 2016
Pumba: Red Harley Street 750
Comment
-
Here surplus stock. FZ-S ppl removing themOriginally posted by nand15 View PostI have been planning on this , but haven't been able to get my hands on the fitting clamp / brackets for it ...
, evrytime i go to SVC it's a standard " no stock sir " reply ...
hoping to get this done soon ...
P.S : anybody help me out on the air leakage issue ...

I want to get rid of the odd looking platesOriginally posted by kinshuk.arya View Posti dont like fz-s' visor....
#RetiredRider
#KeyboardWarrior
Comment
-
If there is nothing wrong with the tyre, valve and rims (i hope the rim was thoroughly checked) then i can suspect only vandals. I know that sounds super stupid, but thats all I got dude. Sorry.Originally posted by nand15 View PostP.S : anybody help me out on the air leakage issue ...
Everyone falls down, doesn't matter...
But its how fast you get up, that matters.....
Comment
-
ok guys so i guess i found out what's happening with my air leakage on the front ... I had washed my bike on sunday and today wen i went out , I saw some soap bubble formation on one part of the tyre , i rubbed it off and few seconds later it re-appeared ... thats got to be the point of leakage , so i've just marked the spot with a whitener ... pic attached .
somebody asked what the fz looks like with the fz-s visor but without the side brackets ... pic attached of that too ...
EDIT : the above "discovery"
, was for the front alone , the same problem occurs on my rear as well , so i have a suspect , pic attached ... this was a puncture that was fixed wen the head of a nail went in first
, so at first this covered the entire groove , but after a lot of riding it's like this now , so could this be a cause ?
People ask me , why are you cribbing about the BHP ? to them I say "MORE is never ENOUGH" xbhp.com
FZ16 headlight assembly with projector and angel eye for sale .
My first ever trip log ... http://www.xbhp.com/talkies/tourer/1...gh-clouds.html
Comment



Comment