Re: Honda Unicorn

Thanks for the reply bro...is there no solution for that? its quite annoying

Re: Honda Unicorn

It is but not much and it is one of the very few better products available locally... better in terms of flexibility, correction ability, finish and durability.

Thanks.

Re: Honda Unicorn

Hi guys, my unicorn has completed 5000 kms in 8 months with all free servicing done but there is one issue present from the start.
The fuel indicator needle shows different readings when bike is still and running, difference is about a 1/4.
This change keeps on happening when I'm riding and stop at signals. Where is the sensor located and is it repairable or will I have to replace it?

Thanks

Re: Honda Unicorn

I don't think you need to replace the float, check the connections might be loose contact, its located below the tank

Sent from my K-touch_w650_592zn using Tapatalk 4 Beta

Re: Honda Unicorn

I contacted Honda Regional office and they sent their head engineer to check my bike. Upon just looking he said that if Triple Clamp at the bottom is slightly bent that will cause vibrations. He insisted i get them changed as it was repaired and the angling is never perfect once repaired. I will be taking my bike to get the bottom triple clamp replaced. Hope that fixes the problem.

Help needed to remove plastic film from Unicorns Headlight

Hi Guys,
My Honda Unicorn is 1.5 Year old, I did not removed the plastic film from headlamp immediately after buying bike, rather delayed many months. and now it is kind of sticked to it, I am unable to remove it. Please find attached pics for it.
Kindly suggest how can i remove it. It looks bad.
Thanks in advance

Re: Help needed to remove plastic film from Unicorns Headlight

I'm looking for a good mechanic for Unicorn. I see 333 Racing / Mechanic Shiva, Chennai comes highly recommended here. Can someone give his contact?

Re: Help needed to remove plastic film from Unicorns Headlight

If it was on any other part u could use petrol but not on the visor. Try heating the area with a hair dryer and wipe off the glue with a moist cloth

Sent from my K-touch_w650_592zn using Tapatalk 4 Beta

Re: Help needed to remove plastic film from Unicorns Headlight

hi guys,
i am using Honda Unicorn 2008 model , is there any one using engine kill switch in Honda Unicorn

or someone please guide me to install an engine kill switch in my Honda unicorn, i already have a switch assembly from yamaha fz16

please guide me

Re: Help needed to remove plastic film from Unicorns Headlight

U gonna do it urself or a mechanic ? I don't think anyone has done it till now coz ive seen many modded uni's but not one with a kill switch.

Sent from my K-touch_w650_592zn using Tapatalk 4 Beta

Re: Help needed to remove plastic film from Unicorns Headlight

Well I am gone mad today! the reason after riding the vehicle for 800 km after the repair from the company again the cylinder has gone bad again there is sound from the vehicle now finally I have decided to give the vehicle to the asc and get the current cylinder kit open and get the work done from outside meaning filling in the gap of the cylinder kit with led so that there is no more problem i know i know I will lose the warranty to hell with the warranty what is the point of such a warranty in which there product is such which gets spoilt every 800 km.
Well I spoke to the head mechanic of the asc and he also told me to do so well what also I have decided to sell the vehicle now.
I have had enough with Honda company. They are actually making a fool out of me there product line has gone so bad as it is I have gone into a state of shock to see the cylinder kit going bad the 4th time. May be something else is the problem somewhere well lets see on friday the vehicle will be opened and by 1st of the next month I hope I shall be saying good buy to honda.

Re: Help needed to remove plastic film from Unicorns Headlight

Is your bike smoking white smoke or only the noise issue? If only noise something else is the problem. Because there is no way 4 cylinder kits having the same problem. I feel that your ASC mechanic messing your bike with no expertise. Don't do anything to your new bore kit unless it is smoking. Find out the source for the noise.

Re: Help needed to remove plastic film from Unicorns Headlight

I second that opinion. Check if the bike really smokes and goes down on oil.
It could also be due to improper valve seating to loose timing.
Did you run-in the bike properly after rebuild?

Re: Help needed to remove plastic film from Unicorns Headlight

Why don't u try another asc, like in my city there is city Honda and dhruvdesh Honda, city Honda is shit they have no proper customer support.

Re: Help needed to remove plastic film from Unicorns Headlight

I told you the first time itself when you said about this plan, insist on getting the vehicle changed or getting your money back and not to get it repaired, a damage piece is a damage piece. . . It's high time I guess to get it repaired or just sell it off, you can't live with a problematic bike. . . Why don't you mail directly to HMSI instead of speaking to these people. . ?

Cheers!!!