Announcement

**sumit512** · 07-21-2011, 03:05 PM

Originally posted by TrueBlueBikeR View Post

sumit512 , do lemme know dude if u r up for this sunday early morning ride to manesar.i have already dropped you a message regrading the same. besides if any of the other delhi cbr owners are interested do join us at 5:30 am , sunday in front of ambience mall.

Sorry Mate, can't make it this time. Better luck for me next time.

**r13nick** · 07-21-2011, 04:07 PM

Originally posted by TrueBlueBikeR View Post

sumit512 , do lemme know dude if u r up for this sunday early morning ride to manesar.i have already dropped you a message regrading the same. besides if any of the other delhi cbr owners are interested do join us at 5:30 am , sunday in front of ambience mall.

5:30am

i wanted to join but i cant get up that early.

**kishoremuthu** · 07-21-2011, 04:09 PM

Originally posted by psr View Post

The bajaj Caliber and the Yamaha FZ oil filters are close match and are easily available.at 35/- to 40/- rupees. they can be fitted and will do the job...only thing filter change interval need to be more...just to be on the safe side...You have to convince the SVC to let you use it without warranty issues, otherwise stick with old filter itself.

Hello psr,

can i put any of these oil filters in CBR.. will there be any problem caused to the engine.. I will change the oil filter to original CBR one, once the stock is received.. till then can i use FZ's or Caliber's??

**MAVERICK_m21** · 07-21-2011, 04:24 PM

Hi,

Its 15 kms on odo, a bit rust on the washers of T set handle, should I take delievery & there are 7 pieces in tool kit & ask them to give 2 more pieces?
Thank you in advance

**blackprince** · 07-21-2011, 04:52 PM

Originally posted by AmlanR_CBR View Post

PS:

I never told him to colour it yellow or make a handle or write "Honda" or "CBR" or anything on it..i just told him, i dont have time so just make something..i dont want a fancy stand or "original looking" type!!

whatever has been done is totally the idea of my fabricator (includes the colour and stickers)..he even wanted to fabricate foam handle bar and swingarm retainers and adjusters but since i was on a serious crisis of time, he said he'll do it when i come for holidays...

The material used was extracted from a gym equipment (for making calf muscles..dunno wat thats called) so NO QUESTION of low quality product...

costed me 2500/- (500 was tips for the exceptionally awesome stand he made for me in such a little time...i just wanted to hug him and say "bhai u are the bestest among the best"

he confessed in the end that "if it wer not for you, i wud never have made a stand with so much dedication and passion for perfection...for any other customer, i simply wud have said "we dont do such stuff" ..

He agreed to do more stands for anyone who wants it done and willing to ship it (provided u pay for the shipping)....
U just have to use the name "Amlan" or else he'll say NO!

for more details, drop me a PM (ps i may take anytime from one week to one month to reply to us msgs as i will be on the move this week and will take some time to settle down at my new destination) or else drop me an SMS on 09583368893 (as long as em gonna use it,max to max for another week)

At last ,Dedicated to all the DIY people like Aargee,TheSting,FastestIndian and all those who value for their money and wudnt wanna waste some 5-6K on a simple bike stand for the sake of "brand"!!

catch up with ya guys later wheneva i can...have fun guys!

Honda showroom says that they will arrange a original stand for me @ 2800/- so i think ur stand will cost too much after paying the shipping charge... brother

**blackprince** · 07-21-2011, 04:59 PM

@all

Here is my Baby... Got it 12th July... after almost 2months waiting period..

**aargee** · 07-21-2011, 06:07 PM

Originally posted by Nithesh View Post

Last i heard...Checkout the last page

Originally posted by sudeepnbr View Post

IIRC, they said, 92% of the bike is from India, rest 8% is made/imported from outside (maybe Japan)

Should be true, that's what I feel. I'm still surprised as what still comes from Japan.

Originally posted by psr View Post

The bajaj Caliber...otherwise stick with old filter itself.

Ji...add one more line...at your own risk

Lol!!!

Originally posted by blackprince View Post

Honda showroom says that they will arrange a original stand for me @ 2800/- so i think ur stand will cost too much after paying the shipping charge... brother

Pls refrain talking like this in public. Amlan has invested much on his own effort & time to make one. Its not the cost, its the passion that drove him & no money can measure passion.

Originally posted by blackprince View Post

after almost 2months waiting period..

Congrats. Now that raises few questions...
While the entire nation has 4+ months of waiting period & you get in 2 months, does that mean...
- More people are cancelling?
- HMSI increased production

- Or other personal reasons

**psr** · 07-21-2011, 08:00 PM

Originally posted by kishoremuthu View Post

Hello psr,

can i put any of these oil filters in CBR.. will there be any problem caused to the engine.. I will change the oil filter to original CBR one, once the stock is received.. till then can i use FZ's or Caliber's??

I am suggesting an alternative in size and fit....I had also mentioned to please check with Honda SVC for acceptance and fitting..Whatever you do , be aware it is not to stock specification and you have to make the decision at YOUR Risk.any deviation from original design parameter is to be evaluated , and then only used,which is why consulting with Honda SVC engineers is essential .

**Nithesh** · 07-21-2011, 08:01 PM

Originally posted by aargee View Post

& no money can measure passion.

Hero Honda did

Btw i finally booked mine today. Now my wait begins. Hopefully in 3 months time i could end up getting a bike with little or no niggles :P
But maybe im just hoping :P
Btw i dont know why u guys are complaining about non availability of oil filters.
After i booked mine i went down to service area there was a RED CBR on one side of the bay and i called the CBR trained mech(trained in Blore it seems) and he didnt look like a pro but i was pretty satisfied with what he knew about it.
And i spoke to the service manager and he said he had 3 filters last week (2 went out).. One will be fitted on the bike present in the bay. I asked him how long will it take to get a new order and he said he can do it in a week's time or two.

@Sudeep if u see this please change the date of booking in ur list please? :P it says 2021 lmao(altho i cant laugh at it because it cud be true) :P

**kishoremuthu** · 07-21-2011, 08:08 PM

Originally posted by psr View Post

I am suggesting an alternative in size and fit....I had also mentioned to please check with Honda SVC for acceptance and fitting..Whatever you do , be aware it is not to stock specification and you have to make the decision at YOUR Risk.any deviation from original design parameter is to be evaluated , and then only used,which is why consulting with Honda SVC engineers is essential .

thanks for your suggestion.. i will check with the Honda SVC guys.. let us see what they are telling..

**psr** · 07-21-2011, 08:21 PM

Originally posted by aargee View Post

Ji...add one more line...at your own risk

Lol!!!

OOOPS.. Thanks Ji for pointing out my error..I will add it hereafter..
Hope you had sourced the brake pads, throttle and clutch cables.

**Youngking** · 07-21-2011, 08:26 PM

I have already placed my order for the oil filter for my 2nd service 2 weeks after in dream honda whitefield. The service manager told there won't be any problem getting it as shipment is already on the way from thailand.

**TrueBlueBikeR** · 07-21-2011, 08:40 PM

Originally posted by r13nick View Post

5:30am

i wanted to join but i cant get up that early.

It's nener too early to get up for a good morning ride, the feeling of cool breeze through the visor of your helmet, the joy of riding in group with like minded people and sharing a few pointers on bike and stuff related to bikes. The adrenalin rush of taking your beast to the max on an open stretch has absolutely no substitute.

@all CBR 250R owners
guys did u all get 1 or 2 allen keys along with your toolkit, coz i just got one in my tool kit aloong with the regular stuff, haven't got the 4' inch allen key used for tightening RVM's when thry become loose.

**bhs** · 07-21-2011, 08:40 PM

Originally posted by aargee View Post

Its Nelson Rigg Spirit 30 Tail Bag, I don't have pic here. Remember posting the pic in Riding Gear sometime ago, probably in the month of June

Thanks for the pic.
Can you tell me how did you narrow down to this particular bag ?
I am basically looking for daily commuting apart from carrying stuff for a day or two.
For my daily commuting, i would have a laptop, raincoat and small stuffs.

**Rahul Rods Tewathia** · 07-21-2011, 08:46 PM

Originally posted by Nithesh View Post

Hero Honda did

Btw i finally booked mine today. Now my wait begins. Hopefully in 3 months time i could end up getting a bike with little or no niggles :P
But maybe im just hoping :P
Btw i dont know why u guys are complaining about non availability of oil filters.
After i booked mine i went down to service area there was a RED CBR on one side of the bay and i called the CBR trained mech(trained in Blore it seems) and he didnt look like a pro but i was pretty satisfied with what he knew about it.
And i spoke to the service manager and he said he had 3 filters last week (2 went out).. One will be fitted on the bike present in the bay. I asked him how long will it take to get a new order and he said he can do it in a week's time or two.

i am wating for filter from 3 weeks and they are just telling next week we will get air filters.
malva honda got around 20 oil filters and all got fitted in cbrs now many are in wating list to get oil filter soon..
but here in delhi all svc are telling that oil filter is must on 1st service and in 1st 1000 km..
i have readed many posts here that svc are saying we dont have oil filter and get it changed on 2 service

Originally posted by TrueBlueBikeR View Post

It's nener too early to get up for a good morning ride, the feeling of cool breeze through the visor of your helmet, the joy of riding in group with like minded people and sharing a few pointers on bike and stuff related to bikes. The adrenalin rush of taking your beast to the max on an open stretch has absolutely no substitute.

@all CBR 250R owners
guys did u all get 1 or 2 allen keys along with your toolkit, coz i just got one in my tool kit aloong with the regular stuff, haven't got the 4' inch allen key used for tightening RVM's when thry become loose.

no bro i have also got 1 allen key in my kit its 5' inch allen key.
just get one allenkey set from hardware shop for tighting rvm and for other stuffs..

Announcement

Honda CBR 250R

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment