Announcement

**Sarvajit** · 08-18-2011, 02:06 PM

Originally posted by POS View Post

Just came back from service center, after completing 1000 Kms after 1st service, went there for washing and chain lube, they charge me just 40 Rs for washing and chain lube... that's nice...

Please post this in the R15/FZ thread-some owners have been charged upto Rs.300 for chain cleaning&lubrication!

Daylight robbery, I'd say.

**shivaprasad.ms** · 08-18-2011, 02:55 PM

Originally posted by Sarvajit View Post

Please note that the tankpad is stuck to the tank using the double side tape which it comes with. This, in case of good quality pads will be 3M.
Removing it will not spoil the paint&the sticker residue can easily be removed with soap water.
I am speaking out of personal experience as I have removed&reinstalled the tank pad on my R15.

What brand did you try? Did you buy the Yamaha supplied one for R15 or from outside?

**sumantg** · 08-18-2011, 03:10 PM

Originally posted by rmchhetri View Post

Mud flap is a practical solution, and I am ready to insult my bird if that is what I have to do to save her in the long run

Like you mentoined, Its not the radiator fins alone in question, its the fan behind which is getting all the mud deposits and its not easy to clean them off. Am afraid it might stop working if it continues like this. My project this weekend is to find a good mudflap (Someone who has already tried it got it from a Yamaha bike, dont know which one though). I'll share the outcome with ya all.

Hi rmchhetri,

I am sumanth (known as sumantg in Xbhp) and i have installed mub falp on my CBR. Soon i will upload pictures. I forgot the mud flap part number which i bought from Yamaha.

I have a drill machine with me and i have fixed it myself (20 mins of time).

Now, my radiator is safe guarded from mud and water. People in bangalore can call me @9880250499, in case you need any help in this regard.

Regards,
Sumanth

**thefastestindian** · 08-18-2011, 04:03 PM

Done with 3100 kms on the odo and changed to 10w30 full synthetic now. Can feel the difference. Was waiting from the day i my first service done to go to full synthetic. total cost : 755 rs. labour charge + chain lube + few minor adjustments : 80 rs.

**rmchhetri** · 08-18-2011, 04:05 PM

Originally posted by sumantg View Post

Hi rmchhetri,

I am sumanth (known as sumantg in Xbhp) and i have installed mub falp on my CBR. Soon i will upload pictures. I forgot the mud flap part number which i bought from Yamaha.

I have a drill machine with me and i have fixed it myself (20 mins of time).

Now, my radiator is safe guarded from mud and water. People in bangalore can call me @9880250499, in case you need any help in this regard.

Regards,
Sumanth

Hi Sumanth,

Would like to meet you (with your bike

) so tell me if your free this week end? I badly need the mod as the mud from the front wheel is spoiling my shoes as well

God, I hate this rain!!!
I've noted down your number, will call ya soon

**sunkenpirate** · 08-18-2011, 04:54 PM

Originally posted by Binoy View Post

Go for RTR180's which suits fine.

Thanks. I'll do that.

**doc_x** · 08-18-2011, 05:30 PM

Originally posted by doc_x View Post

I got a paid service with oil and filter changed at 280 kms(had ordered the filter at the time of delivery) for Rs.779;decided to go in for a mixed break in

]

I paid INR 779 in all.That included Engine oil for 376+34(he said 34 is for tax) and oil filter for 267 and labour charges 50 for filter and 50 for oil change.

**xsreality** · 08-18-2011, 05:37 PM

Called RS Enterprises Pune.

The price quoted for Pirelli Sport Demon:

110/70 = 2800/-

140/70 = 3800/-

**Rahul Rods Tewathia** · 08-18-2011, 06:48 PM

Originally posted by doc_x View Post

I paid INR 779 in all.That included Engine oil for 376+34(he said 34 is for tax) and oil filter for 267 and labour charges 50 for filter and 50 for oil change.

labour charges for free service

**doc_x** · 08-18-2011, 07:26 PM

I think i had mentioned it earlier that was a paid job,i dint use the free service coupon as i plan to get another oil change at 1000kms. I had gone in for a hard break in so got the first oil n filter change at 280kms.

**sunkenpirate** · 08-18-2011, 07:37 PM

Best ASC in pune

Guys, my CBR's due for the first servicing, so I'm probably gonna go tomorrow. Which is the best ASC in pune?

Also, what extra things do I need to ask them to check? Eg, whether steering cone is rusted (steering feels a little stiff lately), my as of yet unsolved tyre hydroplaning issue, and so on.

**Youngking** · 08-18-2011, 08:14 PM

Originally posted by saveus222 View Post

where do you work ?

My office is at ecospace belandur and I daily commute from kundalahalli. Though only 7 or 8 kms the construction work on the way makes everything worst

. There is no good alternate route.
I am plannig to buy a bicycle for this purpose and that can enhace the performance of my CBR by weight reduction method

.

**ZMRMOD** · 08-18-2011, 09:10 PM

HELLO !
it has always been an un-answered question for me
i asked it many in this fourm even today morning
"HAS ANY ONE CHANGED STOCK 6AH TO 9AH BATTERY?"

in evening i decided to do it my self like i did for
HORNS
PROJECTOR LAMP AND
NOW AMARON PRO BIKER 9AH[MF] BATTERY

was very exited abt it as my lamp was just not getting full power when i blow horns or indicators . sometimes ABS and ENGINE also gows off!!

and now i am so happy my problems has gone away

CBR CAN HOLD AMARON 9AH BATTERY BUT ITS AGAIN SOME JUGGAD U NEED TO APPLY AS SHOWN IN PIC

BREAK

the plastic wall for 6AH and space will be available for 9AH

+_ TERMINALS POSTIONS ARE SWAPPED SO U NEED to make some wires long

ohh!!

BATTERY POPING OUTSIDE dont panic

! when covered by seat and tightned further u will feel normal as stock one

i AM VERY HAPPY NOW

sry for capital letters

**sumantg** · 08-18-2011, 09:32 PM

Remedy for Radiator mud problem

Hi All,

I am sharing photos of mud flap that i have fixed on my CBR. Hope this is helpful.

Sorry for the poor quality of pictutres ( captured in my sony ericsson mobile). I have given my camera to my friend. I will upload high quality pictures this weekend.

**psr** · 08-18-2011, 10:29 PM

Originally posted by ZMRMOD View Post

HELLO !
it has always been an un-answered question for me
i asked it many in this fourm even today morning
"HAS ANY ONE CHANGED STOCK 7AH TO 9AH BATTERY?"

in evening i decided to do it my self like i did for
HORNS
PROJECTOR LAMP AND
NOW AMARON PRO BIKER 9AH[MF] BATTERY

was very exited abt it as my lamp was just not getting full power when i blow horns or indicators . sometimes ABS and ENGINE also gows off!!

and now i am so happy my problems has gone away

CBR CAN HOLD AMARON 9AH BATTERY BUT ITS AGAIN SOME JUGGAD U NEED TO APPLY AS SHOWN IN PIC

BREAK

the plastic wall for 7AH and space will be available for 9AH

+_ TERMINALS POSTIONS ARE SWAPPED SO U NEED to make some wires long

ohh!!

BATTERY POPING OUTSIDE dont panic

! when covered by seat and tightned further u will feel normal as stock one

i AM VERY HAPPY NOW

sry for capital letters

Nice work done correctly..The stock is 6 Amperes not 7.,model ETZ 7..(6AH)...If you can give a 5 or 8mm foam or soft rubber at the back of the battery where it rests, it will prevent body vibrations affecting the battery..Please remember that most Automotive Battery fail due to the mechanical vibrations which makes the internal plates brittle.

Announcement

Honda CBR 250R

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment