Announcement

**Andy_kristine** · 12-25-2016, 07:55 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by christo View Post

lol yeah, but its yamaha though. And the tail lamp, they tried to make it look like R1's but poor execution i would say.

I too thought of the same, first they changed the r6 towards the 2015 r1 kinda styling and now it's the R15's turn! Obviously Yamaha won't make a 1.5L costing bike to look like 25L Rs costing one.

But it is still a sick look for a 150cc bike! Already the R15 is the most coolest looking small capacity fully faired bike out there and now this will make it even more adorable!

**Tanmay26** · 12-25-2016, 09:35 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Abhi599 View Post

Today I was cleaning the air filter of my bike and I happened to see this device. Can anyone throw some light on what this could be.
Can anyone suggest an alternate airfilter which will last longer than the stock.

That is actually the pipe connecting the fuel tank to the charcoal canister at the back.

**black asp** · 01-02-2017, 10:21 AM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Andy_kristine View Post

Doesn't it look like the Gixxer 250? The alloy wheels are a perfect match , consoles look like the ones from gixxer 150 sf and the tail light look like the gxsr 1000 inspired ?!

Yeah but the rear swingarm and the engine casing(visible in another pic) are lifted directly from the current R15 v2
So mostly it's a Yamaha

CHEERS

**Midhun.akd** · 01-02-2017, 12:41 PM

Re: Yamaha YZF-R15 version 2.0

Hello friends... My new R15 v2 260km odo, sounds harsh(tak tak sound like loose tappet )and heat quickly... Always ridden under 5000 rpm.. Please share your experience bros...
One think i noticed that new batch r15 radiator fan stop working when engine turned off...

**Sundeep Sunil** · 01-03-2017, 01:58 AM

Re: Yamaha YZF-R15 version 2.0

Bought a mobile holder which is simple and easy to use with our bike. This is made to fit on car AC vent but i tried to fit it in front visor of our bike. It can hold on it very sturdy. Rode the bike on very rough roads full of pot holes and also tried triple digit speeds to check whether the wind blast might do anything with the mount and mobile, but it stayed perfectly safe and sturdy. I couldn't upload the pic with the mobile mount attached with the bike. I will upload it later in about 2 days.

Link: Vheelocityin Colorful Clip AC Vent Car Mobile Holder Car Cradle 5.5" - Colors may Vary For Volkswagen Ameo: Amazon.in: Car & Motorbike

**Andy_kristine** · 01-03-2017, 12:53 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by black asp View Post

Yeah but the rear swingarm and the engine casing(visible in another pic) are lifted directly from the current R15 v2
So mostly it's a Yamaha

CHEERS

Ofcourse, it's a Yamaha mate. I said that it resembles the Gixxer on a funny note!

And here is a rendered picture that closely resembles the production version.

I'm attaching it here in case members here haven't already came across it.

**Jessel Paul** · 01-03-2017, 02:33 PM

Re: Yamaha YZF-R15 version 2.0

I have an slight bend to the right hand side in my handle bars the whole assembly from the fork seems like that to me,but im not sure where is the problem.after a small crash this bend had occurred therefore i had replaced the right side handle bars and got a new one and as said by the svc guy the right side fork was bend and took it to the lathe and he said its fixed.the bend is almost fixed but still the whole column is slightly bend to the right.how to fix it ??

slightly bend to the right.

the gap on the left.stock bars.

no gaps on the right new bars.

**Sundeep Sunil** · 01-03-2017, 05:35 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Sundeep Sunil View Post

Bought a mobile holder which is simple and easy to use with our bike. This is made to fit on car AC vent but i tried to fit it in front visor of our bike. It can hold on it very sturdy. Rode the bike on very rough roads full of pot holes and also tried triple digit speeds to check whether the wind blast might do anything with the mount and mobile, but it stayed perfectly safe and sturdy. I couldn't upload the pic with the mobile mount attached with the bike. I will upload it later in about 2 days.

Link: Vheelocityin Colorful Clip AC Vent Car Mobile Holder Car Cradle 5.5" - Colors may Vary For Volkswagen Ameo: Amazon.in: Car & Motorbike

Images of the Mobile Holder. Sorry for the crappy photos.

**hatebreeder** · 01-03-2017, 06:31 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Jessel Paul View Post

I have an slight bend to the right hand side in my handle bars the whole assembly from the fork seems like that to me,but im not sure where is the problem.after a small crash this bend had occurred therefore i had replaced the right side handle bars and got a new one and as said by the svc guy the right side fork was bend and took it to the lathe and he said its fixed.the bend is almost fixed but still the whole column is slightly bend to the right.how to fix it ??

You need fork realignment.

**christo** · 01-06-2017, 06:35 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Jessel Paul View Post

I have an slight bend to the right hand side in my handle bars the whole assembly from the fork seems like that to me,but im not sure where is the problem.after a small crash this bend had occurred therefore i had replaced the right side handle bars and got a new one and as said by the svc guy the right side fork was bend and took it to the lathe and he said its fixed.the bend is almost fixed but still the whole column is slightly bend to the right.how to fix it ??

Make sure your upper and lower T-stems are straight too. check front axle and replace if bent.

**Anupam Das** · 01-08-2017, 07:57 AM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Jessel Paul View Post

I have an slight bend to the right hand side in my handle bars the whole assembly from the fork seems like that to me,but im not sure where is the problem.after a small crash this bend had occurred therefore i had replaced the right side handle bars and got a new one and as said by the svc guy the right side fork was bend and took it to the lathe and he said its fixed.the bend is almost fixed but still the whole column is slightly bend to the right.how to fix it ??

no gaps on the right new bars.

You will have to get the triple clamp/under bracket whatever it is called that connects the forks to the steering head changed or rectified/fixed/ repaired. My RX 100 and Unicorn also had such problems but more than your bike- RX had a big crash at 85kmph and Unicorn had hit a large pothole at 90 kmph and I had that part changed. U should feel some difficulty in riding such bikes.

PS: DO NOT quote the entire picture set, remove pictures when quoting.

**Pinaki** · 01-08-2017, 01:13 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Jessel Paul View Post

.. almost fixed but still the whole column is slightly bend to the right.how to fix it ?? ..

Is it causing any trouble riding ? else leave it alone . Many bikes have this kind of slight "off from perfect center handle" kind of thing from hard knocks , feels odd a few days then you get adjusted to it and forget . No real problem I've ever had from these .

**Jessel Paul** · 01-08-2017, 01:17 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Pinaki View Post

Is it causing any trouble riding ? else leave it alone . Many bikes have this kind of slight "off from perfect center handle" kind of thing from hard knocks , feels odd a few days then you get adjusted to it and forget . No real problem I've ever had from these .

No trouble in driving as im adjusted to it !!!!

**jeyessh** · 01-08-2017, 04:02 PM

Re: Yamaha YZF-R15 version 2.0

Originally posted by Jessel Paul View Post

I have an slight bend to the right hand side in my handle bars the whole assembly from the fork seems like that to me,but im not sure where is the problem.after a small crash this bend had occurred therefore i had replaced the right side handle bars and got a new one and as said by the svc guy the right side fork was bend and took it to the lathe and he said its fixed.the bend is almost fixed but still the whole column is slightly bend to the right.how to fix it ??

Loosen both the allen screws that connects the clip ons to the top triple clamp. Clip on can be actually be moved a little. Make sure both the clip ons are adjusted to the same angle and tighten them. Clip ons in R15 can be adjusted a little.

PS: DO NOT quote the entire picture set, remove pictures when quoting.

**black asp** · 01-08-2017, 11:18 PM

Re: Yamaha YZF-R15 version 2.0

Just posting pics of my last oil change.
Did around 1500+kms in 2 days and another 250 kms in 5 days .

The bike has run 1.2 lakh kms stock bore.
Lost my rim due to an accident in the return journey [emoji20]

CHEERS

Announcement

Yamaha YZF-R15 version 2.0

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment