It will last up to 30+k kms [emoji41]
Announcement
Collapse
No announcement yet.
Pulsar 200 NS Owners Review and Experiences
Collapse
X
-
Re: Pulsar 200 NS Owners Review and Experiences
Originally posted by xplod566 View PostBro can u upload a video with the exhaust note.
That engine guard....where did u get it and how much it costs?Sorry for the late reply. Bro go through the youtube link to see this exhaust note...actually its not bit sound clear but u could get. I have tried to show the proper connection to bend pipe from the lower side.. and ignore the akrapovic decals on it [emoji12] [emoji6]Originally posted by jbm_guy View PostSuperb bro, you must make an YouTube video the exhaust and the way you have molded that...from underbelly... Good..[emoji106]
It is a entry level Tech hardy exhaust. Not the air filter i was talking about. Here filter means db killer which helps to lower the sound note and doesn't affect the mileage(for my case though).Originally posted by Ankitsingh007 View PostWhich exhaust is it then?
Any specific name?
And which air filter is being installed now?
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
hahaha true dat !!Originally posted by jbm_guy View PostI think you are the most sane NS rider [emoji6]
_______________________________
As I lay my rubber on the street
I pray for traction I can keep
But if I spin and begin to slide
I pray, dear God please protect my ride
And if I lay down my bike today
I pray to God I walk away...
I walk away to ride another day
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
Yes, absolutely. I love my NS.Originally posted by jbm_guy View PostI think you are the most sane NS rider [emoji6]
----consecutive posts auto-merged-----
Thats so f-ing hot!!Originally posted by xplod566 View Post[ATTACH]197979[/ATTACH]
Looks so cool
Last edited by danny king; 12-01-2015, 06:53 PM.Your bike is a part of you....
Since Nov 2012: Pulsar 200NS
Jan 2009 to Nov 2012: Yamaha FZ18
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
Hello broOriginally posted by optiprime View PostSorry for the late reply. Bro go through the youtube link to see this exhaust note...actually its not bit sound clear but u could get. I have tried to show the proper connection to bend pipe from the lower side.. and ignore the akrapovic decals on it [emoji12] [emoji6]
It is a entry level Tech hardy exhaust. Not the air filter i was talking about. Here filter means db killer which helps to lower the sound note and doesn't affect the mileage(for my case though).
Thats nice setup you have got.
You got that bend pipe custom made ?
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
No it is ready made available in market. Actually i wanted a stainless steel made but was not readily available so jumped to simple one.Originally posted by maninderz View PostHello bro
Thats nice setup you have got.
You got that bend pipe custom made ?
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
Tyres changed:-
Front:- MRF ZAPPER FQ
Rear:- MRF Revz-S
Thanks for advising the Michelins they were available here in Ahmedabad but they were of very old stock so they were rolled out so,finally got MRFs and they have improved the stability, can't say much as they are only 37 kms old.
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
Gaurav, get the console changed. I got mine done under warranty(issue - RPM needle vibes). SVC Guys will change it for freeOriginally posted by GauravD View PostThanks bud for letting me know about this.
Hmmmmm.. however I am guessing that the svc center guys will not replace the console under warranty for me since the console is still working perfectly barring the errant vibration of the needle. Any idea how much would that cost if I decide to go on with it since its not a big deal and not something which I could not live with.
from - Krishna bajaj sec 14.ride or die
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
Hi.can you please elaborate what you mean by needle vibes?Originally posted by sieze.s View PostGaurav, get the console changed. I got mine done under warranty(issue - RPM needle vibes). SVC Guys will change it for free
from - Krishna bajaj sec 14.
Comment
-
-
Re: Pulsar 200 NS Owners Review and Experiences
Originally posted by xplod566 View PostOhk.I thought the eratic behaviour where the rpm needle sometimes shoots up to 2.5k rpm and goes back to 1.5 again.
ThanksOriginally posted by Ujjwal96 View PostBro,the rpm needle vibrates in certain rpm band when u rev the engine.In a certain revband (in my case from 4500 - 5500) the needle vibrates like the needle of a seismographs when recording small scale earthquakes. However below and above that the needle is stable. This range also varies from gear to gear. Apparently there is a range in every gear where the engine vibes are being passed onto the console or something.Originally posted by xplod566 View PostHi.can you please elaborate what you mean by needle vibes?
@seize.s - What was the reading on your odo when you got it done approximately. Mine's at 11570
----consecutive posts auto-merged-----
Guys,
I am planning to do a small modification on my NS however not very sure as to how it would turn out. I want to get ride of this headlight and have it replaced with either an aftermarket round headlamp or a 4inch twin headlamp. I have not yet decided if I wanna go in for 4inches or 5 since I am yet to take the measurements of the forks where the clamps would go.
Have any of you guys ever tried out something like this on the NS or have seen any NS which has been done up with this mod. Looked all over the internet and could not find any. My guess is it would look something remotely like the Triumph bike which Tom rode in MI2.
Wanted your suggestions as to how do you envisage this to look.
_______________________________
As I lay my rubber on the street
I pray for traction I can keep
But if I spin and begin to slide
I pray, dear God please protect my ride
And if I lay down my bike today
I pray to God I walk away...
I walk away to ride another day
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
Ohh u mean triumph speed triple's head [emoji7] [emoji7]Originally posted by GauravD View PostIn a certain revband (in my case from 4500 - 5500) the needle vibrates like the needle of a seismographs when recording small scale earthquakes. However below and above that the needle is stable. This range also varies from gear to gear. Apparently there is a range in every gear where the engine vibes are being passed onto the console or something.
@seize.s - What was the reading on your odo when you got it done approximately. Mine's at 11570
----consecutive posts auto-merged-----
Guys,
I am planning to do a small modification on my NS however not very sure as to how it would turn out. I want to get ride of this headlight and have it replaced with either an aftermarket round headlamp or a 4inch twin headlamp. I have not yet decided if I wanna go in for 4inches or 5 since I am yet to take the measurements of the forks where the clamps would go.
Have any of you guys ever tried out something like this on the NS or have seen any NS which has been done up with this mod. Looked all over the internet and could not find any. My guess is it would look something remotely like the Triumph bike which Tom rode in MI2.
Wanted your suggestions as to how do you envisage this to look.
I would love to see ur moded ns [emoji6]
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
How much it costed and what's the profile for Zapper FQ ? Is it 100/80-17R ?Originally posted by Ujjwal96 View Post[ATTACH]198150[/ATTACH][ATTACH]198151[/ATTACH][ATTACH]198152[/ATTACH]
Tyres changed:-
Front:- MRF ZAPPER FQ
Rear:- MRF Revz-S
Thanks for advising the Michelins they were available here in Ahmedabad but they were of very old stock so they were rolled out so,finally got MRFs and they have improved the stability, can't say much as they are only 37 kms old.
Comment
-
Re: Pulsar 200 NS Owners Review and Experiences
Does that mean I would now my poor NS plays lab rat ... hahahahaaOriginally posted by kany1991 View PostOhh u mean triumph speed triple's head [emoji7] [emoji7]
I would love to see ur moded ns [emoji6]
_______________________________
As I lay my rubber on the street
I pray for traction I can keep
But if I spin and begin to slide
I pray, dear God please protect my ride
And if I lay down my bike today
I pray to God I walk away...
I walk away to ride another day
Comment



Comment