Ya true ,somtimes I park my bike infront of a chai stall to have tea ,and forget about other people, I myself cant stop staring and admiring the beauty of the bike .

drainage hole in silencer chamber...

guys just for info.... there is a small hole in the box chamber of silencer... may be for drainage of water.....

ignore if already aware..

Thanks a lot ,finally what have you decided to go with ?

3M wax polish and waxpol wax polish both cost around 80rs , but 3M quality is better ..
3M is international quality whereas waxpol is local ..
waxpol is available almost everywhere , whereas 3M polish is very diff to find ..

grooming kit for my bike includes --
-- sonax car wash shampoo 1ltr 275rs .. purchased from reliance auto zone
-- motomax dashboard polish .. 90rs .. purchased from shell
-- 3M wax polish .. 80 rs .. purchased from auto service pbk svc ..
-- microfibre cloth .. 40rs ..

playing around with these things for 2-3hrs will make the bike look better than the ones parked in showroom ...

You will require to pull the throttle with the choke on to get the choke working!

Yes, and the best part is that from God knows where it starts to drain water at the parking many a times. My friend was like "your bike is peeing"


+1, 3M stuff is good.

Talking about the polish, coming from a Black bike, yellow is really amazingly good at maintaining it's shine. Right from showroom to current reading of 2300Kms on ODO, my bike has just been properly washed at first SVC and rest in rains, and it still looks good!

In that case you need to do it by sections, meaning that you clean one section of the chain, then roll the bike some 30-40 cm and clean the next section, keep doing it until the whole chain is clean and repeat the process for lubing, now for the chain slack adjustment you will definitely need center or paddock stand since the rear tyre must be elevated to do it correctly.

Thanks speedshift. Will do it and post the experience.

yes .. black is very difficult to maintain and even minor scratches seem to get highlighed..
silver is the easiest color to maintain ..

You can give a shot at the Motomax bumper black. check-out Premium Liquid Polish for Cars, Waterless Car Wash Manufacturers

200ns

Hello everybody.. I had a query.. Iam done with my first service and i have done 1k and now i hear a small rattling noise near the handle and the speedometer.. Is anybody facing the same issue..please let me know
otherwise iam happy with the overall performance and a proud owner of the Pulsar 200 NS ( Fear the Black)

If on a budget then you can go ahead with motomax bikes liquid polish or silicone liquid polish.

Otherwise you can go with Collinite 845 insulator wax. This one costs around 1000 bucks.

For how many times this 80 Rs polish goes???

Thanks a lot guys !!!!

enough for 6 months if you clean your bike once in a week ..

today a strange thing happend with my bike.

Bike has run 273 kilometers till today. there are 3 bars showing in the fuel gauge.

After riding for about 30 kms today my bike started to slightly loose power, then came back. then after another 15 km ride the power just went off as if it hit reserve, then i parked my bike on the road side turned the fuel knob to reserve and then started again it went smoothly.

Since i have been reading about the fuel gauge not showing the correct reading i just turned the fuel knob to the "ON" position and rode for almost 2 kms without any glitch.

During all this the orange indicator light on the console never lit even once. Hence my confusion if there is something wrong with the bike or the fuel gauge.

I will take a longer route today while returning home and check on this issue to confirm if it is still happening.

My bike has been responding very well to the throttle, clutch and gear shifts have been smooth except for a couple of false neutrals.

Also i have been riding in the RPM range of 4-6 k regularly. Could this be damaging the engine?

while riding today i felt that the engine is getting stressed at speeds above 60 km maybe because of the problem mentioned above.

Could there be any problem with AFR mixture be lean?

What could be causing this any idea?

Guys really need your help on this.