Announcement

**hypheni** · 11-04-2013, 06:43 PM

Re: Pulsar 200 NS

200NS has all mind blowing colors, a definite eye catcher. To me its a gem as I love single colors.

**pv1984** · 11-04-2013, 08:15 PM

Re: Pulsar 200 NS

Originally posted by bondarun View Post

Its the idle screw issue...

Ride your bike for 2~3km
Park it and adjust the screw real slow to clock wise, you can find the RPM increasing..
Adjust it real slow and set it to idle at 4k...

Now Turn it Anti Clock wise real slow and keep it at 1.5k

Now there wont be any kinda RPM fluctuation in your Bike....

This happened to me alot..
SVC ppl were not able to figure it out, I did it by myself and fixed it... :P

Hi , I had this issues a while ago ...just out of curiosity can u tell me where do I find the idle screw.
Do i need to remove the seat/panel to get to it ??

**Indrathirth** · 11-04-2013, 08:19 PM

Re: Pulsar 200 NS

Originally posted by pv1984 View Post

Hi , I had this issues a while ago ...just out of curiosity can u tell me where do I find the idle screw.
Do i need to remove the seat/panel to get to it ??

Its on the right side on the engine near clutch cable junction.

Sent from my Micromax A110 using xBhp Connect mobile app

**Newrider88** · 11-04-2013, 08:37 PM

Re: Pulsar 200 NS

Originally posted by pv1984 View Post

Hi , I had this issues a while ago ...just out of curiosity can u tell me where do I find the idle screw.
Do i need to remove the seat/panel to get to it ??

Here it is. It has rubbery touch and a yellow colored marking on it. (may be in my case)

**Aniket6626** · 11-04-2013, 08:44 PM

Re: Pulsar 200 NS

This might give you a better zoomed view
It also has the location for afr screw.

**pv1984** · 11-04-2013, 08:50 PM

Re: Pulsar 200 NS

Originally posted by Indrathirth View Post

Its on the right side on the engine near clutch cable junction.

Sent from my Micromax A110 using xBhp Connect mobile app

Originally posted by Newrider88 View Post

Here it is. It has rubbery touch and a yellow colored marking on it. (may be in my case)
[ATTACH=CONFIG]123426[/ATTACH]

Originally posted by Aniket6626 View Post

This might give you a better zoomed view[ATTACH]123427[/ATTACH]
It also has the location for afr screw.

Thanks Guys , I thought it was on the left side of the bike...like some of the other bikes.

**Abishek94** · 11-04-2013, 09:11 PM

Re: Pulsar 200 NS

hey guys, how much does the switch gear assembly and the rear view mirrors of the 200ns cost??

**pv1984** · 11-04-2013, 10:00 PM

Re: Pulsar 200 NS

I didn't have to use any tool , i was able to adjust the idle screw with my fingers...the rubber surrounding it made it easy.

**Cleaner** · 11-04-2013, 10:05 PM

Re: Pulsar 200 NS

Anybody installed fog lamps on their crash guard, need some help regarding this.

**Anuj_Gupta** · 11-04-2013, 11:42 PM

Re: Pulsar 200 NS

My twin Girlfriends- > 200cc sized 23.5 bump of raw power and 150cc blue edition fairing style v2..!!

**Anuj_Gupta** · 11-04-2013, 11:44 PM

Re: Pulsar 200 NS

Originally posted by Abishek94 View Post

hey guys, how much does the switch gear assembly and the rear view mirrors of the 200ns cost??

One rear view mirror -180 bucks,by the way,if only the glass has broken then go to Amy glass shop and have a glaas made for you ,will cost not more than 50bucks

My twin Girlfriends- > 200cc sized 23.5 bump of raw power and 150cc blue edition fairing style v2..!!

**Abishek94** · 11-04-2013, 11:56 PM

Re: Pulsar 200 NS

Originally posted by Anuj_Gupta View Post

One rear view mirror -180 bucks,by the way,if only the glass has broken then go to Amy glass shop and have a glaas made for you ,will cost not more than 50bucks

My twin Girlfriends- > 200cc sized 23.5 bump of raw power and 150cc blue edition fairing style v2..!!

Thanks anuj

**jenimu_kanna007** · 11-05-2013, 01:07 AM

Re: Pulsar 200 NS

any one know the correct price of Michelin tyre pilot street radial in my area its priced 5200 rear tyre size 130/70 r17 for pulsar 200ns

**pratikthereddevil** · 11-05-2013, 12:08 PM

Re: Pulsar 200 NS

Will put my bike for first svc this Saturday....which Oil should I upgrade to or keep the same bajaj oil and what all should I keep in mind during first svc to change...Also, some jealous people have torn my back seat with blade so can I replace it...