Tweet
Re: Suzuki Gixxer 155
Completed first service.. what should be my new RPM limit??Used to be 4.5k
Completed first service.. what should be my new RPM limit??Used to be 4.5k
-
-
Re: Suzuki Gixxer 155
6k/6.5k if iam not mistaken. Folks plz correct me if iam wrong.Originally posted by SKt12 View PostComment
-
Re: Suzuki Gixxer 155
70 kmph aka 5kComment
-
Re: Suzuki Gixxer 155
hi all thanks for accepting me...i am following this thread since 2014 and reading reviews feedback from you guys i recently got my blue gixxer i waited till Jan to get those niggles of paint and rust issue solved finally got my bike on 24th march as per the VIN bike was Jan manufactured and as per date on mono its 17 jan and i have been facing the same issues mentioned here on thread
1)Gears are not sitting properly while downshifting specially from 3<4<5 and hard shifts at 5th gear
2)front disc was not letting the wheel rotate free if i put bike on center stand and turn the wheel on clockwise its stopping like break applied even before the 3/4th of clockwise circle
3)clutch was hard side bit
The bike was just done 370km does anybody faced same issues?what's the solution you got from SVC?Comment
-
Re: Suzuki Gixxer 155
It should be set to 7500rpm till 1600kms
Sent from my AO5510 using xBhp Connect mobile appComment
-
Re: Suzuki Gixxer 155
Front wheel won't rotate freely for any bike with disc brake in front. But still if you feel its tight, check with SVC.Originally posted by sumanthdev123 View Post hi all thanks for accepting me...i am following this thread since 2014 and reading reviews feedback from you guys i recently got my blue gixxer i waited till Jan to get those niggles of paint and rust issue solved finally got my bike on 24th march as per the VIN bike was Jan manufactured and as per date on mono its 17 jan and i have been facing the same issues mentioned here on thread
1)Gears are not sitting properly while downshifting specially from 3<4<5 and hard shifts at 5th gear
2)front disc was not letting the wheel rotate free if i put bike on center stand and turn the wheel on clockwise its stopping like break applied even before the 3/4th of clockwise circle
3)clutch was hard side bit
The bike was just done 370km does anybody faced same issues?what's the solution you got from SVC?
----consecutive posts auto-merged-----
Front wheel won't rotate freely for any bike with disc brake in front. But still if you feel its tight, check with SVC.Originally posted by sumanthdev123 View Post hi all thanks for accepting me...i am following this thread since 2014 and reading reviews feedback from you guys i recently got my blue gixxer i waited till Jan to get those niggles of paint and rust issue solved finally got my bike on 24th march as per the VIN bike was Jan manufactured and as per date on mono its 17 jan and i have been facing the same issues mentioned here on thread
1)Gears are not sitting properly while downshifting specially from 3<4<5 and hard shifts at 5th gear
2)front disc was not letting the wheel rotate free if i put bike on center stand and turn the wheel on clockwise its stopping like break applied even before the 3/4th of clockwise circle
3)clutch was hard side bit
The bike was just done 370km does anybody faced same issues?what's the solution you got from SVC?Comment
-
Re: Suzuki Gixxer 155
As satson said regarding front brake.Originally posted by sumanthdev123 View Post hi all thanks for accepting me...i am following this thread since 2014 and reading reviews feedback from you guys i recently got my blue gixxer i waited till Jan to get those niggles of paint and rust issue solved finally got my bike on 24th march as per the VIN bike was Jan manufactured and as per date on mono its 17 jan and i have been facing the same issues mentioned here on thread
1)Gears are not sitting properly while downshifting specially from 3<4<5 and hard shifts at 5th gear
2)front disc was not letting the wheel rotate free if i put bike on center stand and turn the wheel on clockwise its stopping like break applied even before the 3/4th of clockwise circle
3)clutch was hard side bit
The bike was just done 370km does anybody faced same issues?what's the solution you got from SVC?
Was also getting similar brake shoe rubbing sound when bike was new, but now its completely gone, needs a bit of wear to set in. Keep varying speeds and use front brake at various pressure levels. That's what I did.
Honestly, I was facing similar issues, and found them totally gone at ~1600-1800 kms.
The bike just needs some time and wear/tear to loosen up. That's all the advice I can give you.Comment
-
Re: Suzuki Gixxer 155
Me
Sent From My GixxerComment
-
Re: Suzuki Gixxer 155
7.5k is max after first service till 1600kms after that u can set it to 9000RPM..u can check the owner's manual
Sent from my AO5510 using xBhp Connect mobile appComment
-
Re: Suzuki Gixxer 155
As others have pointed below, ride below 7.5k rpm. Make sure you ride smoothly without much sudden bursts of speed. Try to accelerate smooth till the next oil change.Originally posted by SKt12 View Post
Sent from my C6903 using xBhp Connect mobile appComment
-
Re: Suzuki Gixxer 155
The above pic clearly shows that during hard front braking or sudden hitting of potholes the front mudguard is having contact with crash bar installed. But not heard any sound during riding, identified @ the time of cleaning. Anyone is facing same issue. Kindly check urs...Last edited by Dynamo; 04-14-2015, 09:30 AM.Just follow my shadow.Comment
-
Re: Suzuki Gixxer 155
1. Matt black sticker on tank middle panel... 80rs.
2. 28 SMD LED park light & no. plate light... 220rs...
3. Denso Toyota Fortuner stock dual horns with Roots relay... 600rs. + 70rs...
Sent from my Nexus 5 using TapatalkLast edited by vjay; 04-14-2015, 10:07 AM.Comment
-
Re: Suzuki Gixxer 155
After using my bike for 4 months and 5000 kms I have still not got any solution or any answer for the vibe my bike give in between 4.5k to 5k rpm.
I visited 2 service station here in ahmedabad.
First one totally ignored that vibe, telling me that there is no vibe and all stuff.
Second one initially identified that vibe but at the end of the day he game me answer that thay vibe comes from chain, and when I asked why only on 4.5k to 5k rpm he still says same script!Comment
Comment