
#1 - Yes, the gear shifts will be a bit hard. This is completely normal to have on a new bike. Since the engine is still bedding in and the gearbox and slotting is getting used to, it will be a bit tight. Post first service, this should change and gear shifts should become smoother after an oil change and a bit of running-in.
#2 - Yes, that's the right way to do it. Kill switch should only be used in emergencies. Turning the whole ignition off using the key is a good practice. Your dealer is right. Since the BSIV engines have DRL's and suppose if your switch off the bike only using the kill switch, the DRL's stay on. Since the bike is stationary, it will load the battery. Although it is a minor load, but it does affect the battery life in the long run. Turning the bike off with the key and turning it back on could be cumbersome, but hey, you don't have an option. Either you save petrol or you save the battery. In my case, i do not switch off my bike at signals if they are <60 seconds. If it is >60 seconds, i completely shut the bike off while keeping a tab on the signal. When the signal is <10 seconds, i turn the bike on and go about my day.


)

Comment