Announcement

**Kirankj1724** · 05-09-2011, 01:20 PM

Originally posted by abhichotu.abhi View Post

Thanks. In anyway it looks better than a stock Apache headlamp, look to keep it the same way. How much was the cost involved and which projector lens is that?

projector+angel eye setup(1200)+ HID(1800) + headlight assembly(100

) + fitting charges(300) = 3400

**Drifty** · 05-09-2011, 01:22 PM

Originally posted by Kirankj1724 View Post

@abhi :
its the normal projector+HID+Angel eye setup

The only difference is the headlamp assembly

belongs to RX/MAX100 category.. (guessing)
It has a plastic frame to hold the projector

Ahha!!Bike is looking superb man!I am tempted to do this on my bike now.Is this a direct fit?Or do we have to add some clamp for the headlight support?You converted the electricals to dc set up for this?

P.S.-I see you had removed both the mirrors.Put them back.Its for your safety only.Perhaps that might be the reason for your accidents I guess.

**Kirankj1724** · 05-09-2011, 01:42 PM

Originally posted by Drifty View Post

Ahha!!Bike is looking superb man!I am tempted to do this on my bike now.Is this a direct fit?Or do we have to add some clamp for the headlight support?You converted the electricals to dc set up for this?

P.S.-I see you had removed both the mirrors.Put them back.Its for your safety only.Perhaps that might be the reason for your accidents I guess.

its not direct fit.. requires clamps..

my bike s still AC/DC.. need to convert it to DC ASAP

Had removed the mirrors long back

but that's not the reason for my accident

Will put it back ASAP

**nisnth** · 05-09-2011, 01:45 PM

Originally posted by Abhii46 View Post

If you drive fast in rain, any tire will skid.
After riding a lot in rain I can say that TVS tires are not that bad as ppl call it, they are good tires. But if you still dont have confidence on TVS tires, go for a change.

+1. Even I was surprised when I rode the bike in rain. The TVS rubber is not bad at all !!

Originally posted by Kirankj1724 View Post

That's a neat man !! Loved it (But i personally hate circular headlamps

). But looks damn cool ! Why dont you post a pic of the lights switched on ???

Originally posted by Drifty View Post

P.S.-I see you had removed both the mirrors.Put them back.Its for your safety only.Perhaps that might be the reason for your accidents I guess.

+1. Removing the RVMs are a definite NO-NO !

**Mirhawk** · 05-09-2011, 01:46 PM

Originally posted by Tachyon View Post

Mirhawk...it is little confusing inside when you take out the mudflap. There are two more screws on the either side...after you have unscrewed those...try to pull it out very gently... I am attaching the pic of the flap...hope you find it useful....

Thanks. I have removed the blue one's (which are of number plate) and the red are the one's which are on side. Removed them too. Even then it wouldn't come off! Could You specify on the image where other screws are present, if any?

Also Guys one funniest thing happened. Does anyone want an bike free

??
Got an sms from SVC yesterday stating that My bike is ready after servicing and to collect it. Funny thing was that I hadn't given My bike for servicing!! So, any takers

? Also check out the way they wrote the sms
"Dear sir, u r veh given for servicing is ready. Pl. Come to collect befor .30. O' Clock Lunch time 1.30 to 2.30pm billing time sharp 9.30 to 7.30 pm."

**Mirhawk** · 05-09-2011, 01:48 PM

Originally posted by Kirankj1724 View Post

After 2 accidents in a single month.. Got This :

Close up :

Great modification Dude!! Had been a fan of Angel eyes since very long!! Hopefully will do same as Your bike someday(with the rvm!

).

**vrakchu** · 05-09-2011, 07:16 PM

Hi all White Apache owners,
I got myself promoted with the new Apache 180 ABS - white color(only one available currently). Just throw some light on how to retain the spark of the white color? Wax, coatings, polishes or watever that will help it look the same as now.

**kantu** · 05-09-2011, 07:22 PM

Originally posted by vrakchu View Post

how to retain the spark of the white color? Wax, coatings, polishes

You said it ! :P first get a teflon coating on it asap.
Then get it polished in every service , and if you can spend time polish yourself, Use Waxpol for polishing. You can find this in hardware shops, its called waxpol scooter polish.I have been riding in rains and after using this the water drops just roll down on the bike it will be super smooth for 2 weeks or so.

**Tachyon** · 05-09-2011, 07:59 PM

Originally posted by kantu View Post

You said it ! :P first get a teflon coating on it asap.
Then get it polished in every service , and if you can spend time polish yourself, Use Waxpol for polishing. You can find this in hardware shops, its called waxpol scooter polish.I have been riding in rains and after using this the water drops just roll down on the bike it will be super smooth for 2 weeks or so.

Waxpol (other shiners) for cars can be used for white menace?

**Tachyon** · 05-09-2011, 08:01 PM

Originally posted by Mirhawk View Post

Thanks. I have removed the blue one's (which are of number plate) and the red are the one's which are on side. Removed them too. Even then it wouldn't come off! Could You specify on the image where other screws are present, if any?

Also Guys one funniest thing happened. Does anyone want an bike free

??
Got an sms from SVC yesterday stating that My bike is ready after servicing and to collect it. Funny thing was that I hadn't given My bike for servicing!! So, any takers

? Also check out the way they wrote the sms
"Dear sir, u r veh given for servicing is ready. Pl. Come to collect befor .30. O' Clock Lunch time 1.30 to 2.30pm billing time sharp 9.30 to 7.30 pm."

no yaar...i dont remember exactly....i just remember that i was very frustrated and had removed all the screws i could find in that area!!!

and finally...just pulled it a bit...saw that it was stuck with clip like thingys...thats it...or otherwise just take it to any service center...they will remove it in a jiffy..

**Drifty** · 05-09-2011, 08:59 PM

Originally posted by vrakchu View Post

Hi all White Apache owners,
I got myself promoted with the new Apache 180 ABS - white color(only one available currently). Just throw some light on how to retain the spark of the white color? Wax, coatings, polishes or watever that will help it look the same as now.

We dont get genuine teflon coat as of such!Mostly,they wax polish the bike in name of teflon coat.Best way,buy a tin of Waxpol Ultra Glo,its hard wax.Gives better protection from water marks,dust than other 'liquid' polishes.Among all the hard waxes,Turtle wax is known to be the best.For the black parts,use Waxpol dashboard polish.Make sure,all the products you buy are 'genuine' cause there are many fake ones in the market.Also refer 'Bike polish' thread in Universal Threads section.

**social** · 05-09-2011, 09:34 PM

Originally posted by Tachyon View Post

Hey Social...pls let me know if you are from Bangalore...if yes..then do let me know where to get the rear IRC

Nope my base is Delhi.

But the new tyres are quite good. And the bike feels more under control while braking.

**kantu** · 05-09-2011, 10:02 PM

@Tachyon Post your tire question in bangalore thread da you will get better replies, and btw in bangalore JC road is the hot spot for bike, you get all brand tires too

Waxpol (other shiners) for cars can be used for white menace?

Yeah you can , but the shine will last only for 2 or 3 days and it s not usefull as it only makes the bike shinier, put waxpol caranuba wax i.e the scooter polish the wax stays longer and it will protect it from dust and water.

**Puneet1** · 05-09-2011, 11:20 PM

Originally posted by Drifty View Post

We dont get genuine teflon coat as of such!Mostly,they wax polish the bike in name of teflon coat.Best way,buy a tin of Waxpol Ultra Glo,its hard wax.Gives better protection from water marks,dust than other 'liquid' polishes.Among all the hard waxes,Turtle wax is known to be the best.For the black parts,use Waxpol dashboard polish.Make sure,all the products you buy are 'genuine' cause there are many fake ones in the market.Also refer 'Bike polish' thread in Universal Threads section.

waxpol ultra glo is a polish not wax and so is a little abrasive . waxpol carnauba wax/ turtle wax hard shell is the one to use frequently .

**Garry_Menace** · 05-10-2011, 12:49 AM

Originally posted by vrakchu View Post

Hi all White Apache owners,
I got myself promoted with the new Apache 180 ABS - white color(only one available currently). Just throw some light on how to retain the spark of the white color? Wax, coatings, polishes or watever that will help it look the same as now.

Seeing "Chennai" (South India) as your location, my mind just struck to someting I read about an year ago. Polymer II coating is what I am talking about and I thought of getting it done on my bike but the author who himself claimed to be the distributor of the product said that they just have the product in Southern part of India. So, here I'm quoting the info provided by him after dugging out a his posts dated 13/04/2010

Difference between Polymer II & waxing
Hi Guys....

Great to see you all comment about polymer and waxing. Let me just introduce myself for you all..My Name is Gibson located in USA and I own Polymer 2 Paint Sealant product.

Let me just give you a brief details about "Polymer II" and waxing.

POLYMER II, is a high quality paint sealant that offers deep gloss, long term protection for all types of paint surfaces. Gloss enhancing agents offers depth of shine and clarity like a wax, yet POLYMER II is not a wax and does not contain any wax. Waxes lay on the surface of the paint and provide limited protection against the elements,Ultra violet rays, salt air, insects, road film, harsh detergents, environmental pollution and corrosive acids contained in rain, morning dew and fog can break typical wax products much faster than a true polymer sealant. The problem with waxing is that it only offers temporary protection for your car. Paint has pores, just like your skin. Solar heat closes those pores and forces out the melted wax after a good baking under the scorching sun. These waxes become warm and sticky enough to trap dust, acids and chemicals on your car's paint, exactly what they are supposed to keep away! Sun heated wax is easily washed off your paint, leaving it vulnerable to damage again.

If you've ever used a non-stick frying pan, you already know how slippery PTFE is because that's what makes the pan so slick that eggs slide right off. Virtually nothing can stick to PTFE - not even water! . POLYMER II patented PTFE formulation gives your car the industry's only 1-2 year protection. The end result is a deep, wet shine that stays incredibly clean. When washing is needed, you can simply rinse dirt away with a hose!

POLYMER II is not a wax and does not contain any wax.

Another post dated same saying...

Hay Guys....

We will be launching Polymer II franchisee in a month. Please do contact at this # 9037856525. We will are launching new products as well.

Regards

And, please share the info you get from him. Also, if you call him, ask him if they launched something like this for Delhi also

Announcement

TVS Apache RTR 180

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment