-
-
Dear owners,
I need help in suggesting an aftermarket exhaust for a new ninja 250r 2012 model. If somebody can tell me where to get it and will it affect warranty.
Regards,
Hota________________
Honda Unicorn 05
Yamaha R15 08
Ninja 650R 11
All in garageComment
-
In India, warranty will be void if any changes done to the machine. I use a carbon fibre slip-on by SIMOTA. Nisar motor works in Bangalore deals with this. You could also use Leo Vince or Akrapovic. All these are very good. Depends on you budget and whether you are looking at a slip-on or full exhaust system.Originally posted by Hota View PostComment
-
My Ninja's both front and back break pads have worn out guys.I have clocked 8k kms on mine.I replaced the front with the stock ones priced at 1.5k.
For the rear I am looking out for some low cost alternatives without affecting the breaking performance,Any suggestions?REVVADDICT
-Yamaha FZ-16 (2010-12)
-Kawasaki Ninja 250R (2012-13)
-KTM Duke 390(2013- )Comment
-
Hi everyone,
Does anyone know if the bar end weights of the ninja 250 R are replaceable with bar ends of any other bike in India, I was willing to fabricate brake and clutch lever protectors. So wanted donor bar ends from any other bike
Just because you haven't seen it doesnt mean its impossible...expect the unexpected.Comment
-
Go through this check list in this order:Originally posted by chicane1879 View PostNinja is back again showing its stalling issue.
Now its virtually impossible to ride, the bike stalls down randomly at any rpm/any gear. Escaped couple of lethal situations while overtaking. Have stopped riding the bike!!
Will be taking the bike for servicing/check up this Monday. God knows what's the issue. The spark plugs were changed during the first instance at around 3000kms and now at exactly 6000kms the same problem has cropped but this time with worse symptoms. With pillion it goes max 100 metres and then it stutters and stalls!!
Any pointers?
1) Check stick coils positioning/fitting on both the plugs.
2) Check fuel tank pump for clogging.
3) Check the fuel injectors - both of them.
4) Throttle sensor - it might need a reset.Comment
-
Originally posted by bluevolt View Post
Please also check the 'bike down' sensor . Had a mysterious stalling issue on a friends bike two years ago and it was finally traced to the sensor that shuts off the bike in the case of a fall. The sensor was faulty and kept shutting off the bike intermittently. This fault does not show on the standard diagnostics ad was traced over a few days by elimination at the Chennai PBK.
---------------------------------------------------------------------
In a universe of men and machines, there is an individual who achieves the purest confluence of both worlds where he and the machine must become one - He is The Biker!Comment
-
@jeofpereiraOriginally posted by jeofpereira View Post
How are the Dan moto slipons for the 250r. I havent actually come across any ninja with any mod. Guess everyone i know is still "Under Warrenty"
Comment
-
Vijeth, use the standard brake pads on back and don;t dilute it with other local one's . the reason the back pads will last longer ..much longer than the front, unless your always putting slight pressure on break lever all the time while riding.Originally posted by vijeth v View Post
back one always needed and most important to shed speed , no matter how good the front brake the back one plays very imp role. so spend another 1.5k and get stock oneComment
-
Hey dude, if you follow the link in my signature, I'm selling tyga performance exhaust systems in india. They are a reputed company and manufacture in Thailand. If you want an exhaust for looks and sound, you can buy a slip on. Otherwise I recommend going in for a full exhaust for better weight savings and increased power. Good luck with your choice!!!Originally posted by Hota View Post
p.s it will affect your warranty, but you can always take it off before taking It to the service centre.Last edited by psych0hans; 11-22-2012, 03:36 PM.Now offering Tyga Performance products in India - Brought to you by Midnight Trades
Comment
-
Sorry bro my knowledge in this matter is limited. Never heard of this brand. I've heard of Yoshimura, AKrapovic, Leo Vince, Simota, IXIL and Two Brothers!!Originally posted by Lone_ranger View Post@jeofpereira
How are the Dan moto slipons for the 250r. I havent actually come across any ninja with any mod. Guess everyone i know is still "Under Warrenty"
And Offcourse Tyga by Psychohans!! Sorry forgot about those!!Comment
-
Guys, I'm looking to purchase a green seat cowl for my little ninja,... I've been searching the net for this and all the ones I've seen are either too expensive or shady dealers. It would really help If anyone of you guys could suggest a good dependable dealer who can give me a good price. Kindly do let me know before I spend all my savings on fuel 
Comment
-
Originally posted by aeroblade View PostGuys, I'm looking to purchase a green seat cowl for my little ninja,... I've been searching the net for this and all the ones I've seen are either too expensive or shady dealers. It would really help If anyone of you guys could suggest a good dependable dealer who can give me a good price. Kindly do let me know before I spend all my savings on fuel
Did you check with PBK TVM or at their service center. I bought one from them in august and the price was around 4500.Comment
-
Bought mine from PBK in Goa. Inr 4300/- a year back. When i first inquired only green was available..... had to wait another year to come back on vacation and buy the black one!! So i doubt you would have any issues getting it from a PBK.Originally posted by aeroblade View PostGuys, I'm looking to purchase a green seat cowl for my little ninja,... I've been searching the net for this and all the ones I've seen are either too expensive or shady dealers. It would really help If anyone of you guys could suggest a good dependable dealer who can give me a good price. Kindly do let me know before I spend all my savings on fuel Comment
-
Thanks dude!Originally posted by SamArul View Post I asked them for one when I brought mine and the sales guy said they don't sell it there... Will check with the service center... But 4,500 seems a bit too expensive don't ya think?
Thanks for the Info mateOriginally posted by jeofpereira View Post
Comment
Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us
Regularly check tyre pressures.
Our Partner
Tweet
Comment