Announcement

**Killer** · 04-22-2009, 03:06 PM

Originally posted by Adway View Post

Dude... That was a killer video. When I was going to Mysore, I thought that I needed something like that...
Can you tell us what did you do & how did you do it & what do you think should be done about this tank-camera stuff?

I'll take some pics of the setup and post, it would probably be best if i start another thread

**sk8er_joe** · 04-22-2009, 03:12 PM

Originally posted by surbhit View Post

I am also facing excess vibes in the handlebar and footpegs. I will first look for any loose engine mounts as described by digislayer , if the vibes still don't go then I will take it to the service center.

I am also facing facing excess vibes after my 1500 kms trip, last week end. I can seen even the RVMs shivering like anything...

**surbhit** · 04-22-2009, 03:31 PM

^^ taking the bike to service center would be a waste of time in my opinion, I would removing the tank and see for any loose bolts. If you get the issue solved don't forget to post the solution.

**digislayer** · 04-22-2009, 03:44 PM

Originally posted by Aparajith View Post

^^Kriss from Hyderabad has a tank mounted camera and a setup for his P200. Maybe u can ask him. He should be able to guide/help u.

Hey Guys, I fashioned out an LED based tail lamp setup for the R15. Its got 50 10-mm LEDs. Now I have the circuit such that, 30 bulbs glow when they headlight is switched on and te rest 20 only when the brake lever is pressed.(I will post the pics soon) This no doubt looks good, but am not that satisfied with it. I want it to look like the ones on the RTR/CBZ-X etc. I want all bulbs to glow dim with the headlight and brighter with the brake lever pressed. I know this involves use of resistors etc and am a total noob when it comes to this electricals/electronics stuff. Does anyone have any idea how it can be done? Can someone guide me through this?

Hey, what you're looking for about the LED tail is pretty easy. In fact I myself have been working on an idea that'll work..but been held up with my exams. I'm planning on making the rear look more exciting too..

BTW, the answer for your requirement is to use 2 resistors in parallel.one with a higher value connects to the body lights connection, and the one with a lower value connects to the Brake lamp connector. We also need a few diodes in series to protect fr5om reverse current,etc..it's easy but I need a little time to design the circuit.

**sk8er_joe** · 04-22-2009, 03:45 PM

Originally posted by surbhit View Post

^^ taking the bike to service center would be a waste of time in my opinion, I would removing the tank and see for any loose bolts. If you get the issue solved don't forget to post the solution.

Are u planning to open up the bike. If yes, when?? Looks like 2moro 's off in chennai(strike

)...

**surbhit** · 04-22-2009, 03:49 PM

If my company is closed tom, then I will be doing so otherwise on weekend.

**jadhav92** · 04-22-2009, 04:22 PM

Originally posted by sk8er_joe View Post

Are u planning to open up the bike. If yes, when?? Looks like 2moro 's off in chennai(strike

)...

oh my...was planning to leave my bike at the SC tom.

btw.Is the permanent stand for R15 available in chennai SC?

**Adway** · 04-22-2009, 05:27 PM

Originally posted by Killer View Post

I'll take some pics of the setup and post, it would probably be best if i start another thread

Thanks Dude! Would you mind letting me know other details like componants & prices as well?

**Sarvajit** · 04-22-2009, 05:40 PM

Originally posted by Adway View Post

Thanks Dude! Would you mind letting me know other details like componants & prices as well?

I have the mainstand fitted on my bike. Rubber near the silencer is from the Glady. R15 rubber not yet available. Please check my previous posts. All the part prices are mentioned.

@All: I am still waiting to know your inputs about the tappet noise. I am unsure whether the vibes in my bike are courtesy tappet or something else.

**surbhit** · 04-22-2009, 06:03 PM

Originally posted by jadhav92 View Post

btw.Is the permanent stand for R15 available in chennai SC?

It was not available at any SC when I last inquired, about 15 days ago.

**digislayer** · 04-22-2009, 06:03 PM

Originally posted by Sarvajit View Post

I have the mainstand fitted on my bike. Rubber near the silencer is from the Glady. R15 rubber not yet available. Please check my previous posts. All the part prices are mentioned.

@All: I am still waiting to know your inputs about the tappet noise. I am unsure whether the vibes in my bike are courtesy tappet or something else.

Show me your bike sometime..i'll talk about the tappets also offline for obvious reasons

**uday_nugur** · 04-22-2009, 06:05 PM

cool accesories launched

guys yamaha has launched some more accesories to cater ur needs,I mostly like the single seat cover.Check this link

Apparels & Accessories | India Yamaha Motor Pvt. Ltd.

**onlinesatish** · 04-22-2009, 06:08 PM

Kriss has a Ninja 250's tank cam setup. the mounting point were perfect for his P200 but the hieght was'nt enough. he can only see the speedo in the video and nothing else.

**Praful** · 04-22-2009, 06:09 PM

Originally posted by onlinesatish View Post

Kriss has a Ninja 250's tank cam setup. the mounting point were perfect for his P200 but the hieght was'nt enough. he can only see the speedo in the video and nothing else.

OT:

I guess that means it should be compatible with the 220's tank too?? Any wind free roads in Hyd?

**onlinesatish** · 04-22-2009, 06:11 PM

Originally posted by prafultripathy View Post

OT:

I guess that means it should be compatible with the 220's tank too?? Any wind free roads in Hyd?

Guess so.

And wind free roads??? oh ya.....there's lots. One for example is the ameerpet road

Announcement

Yamaha YZF-R15

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment