Announcement

**nadz11.ns** · 03-18-2015, 01:15 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by devils_friend View Post

500kms done post fitting new tyre. No kat kat sound. Vibes are present all over the bike :banghead:. Couldn't find any defect in the tyre. Been using Motul 300V since past 500kms.

Sent from a phone that is Smart!!

Then its some other problem.
As for vibes in the handle bars, i too have them for a couple of thousand kms

don't know why..

Motul 300v, keep checking the oil level. When i used it last year, its level kept on decreasing. But at that time, the engine used to be extremely smooth.

**yasirfz16** · 03-18-2015, 01:52 PM

Re: Yamaha FZ-16/ FZ-S

can i self adjust the fuel ratio?? As my bike`s engine is giving strong smell since 3-4 days and performance is somewhat low. Yesterday I went to yamah service centre and they said the ratio is right but i dont think so cuz engine gives smell on a very small ride....plzz help me

**nadz11.ns** · 03-18-2015, 01:55 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by yasirfz16 View Post

can i self adjust the fuel ratio?? As my bike`s engine is giving strong smell since 3-4 days and performance is somewhat low. Yesterday I went to yamah service centre and they said the ratio is right but i dont think so cuz engine gives smell on a very small ride....plzz help me

Check the color of spark plug to see if Air-Fuel ratio is correct or not.
Post a pic of it here.

Yes, it can be adjusted. I will post the like to the procedure (mentioned by another member) later.

**devils_friend** · 03-18-2015, 02:18 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by nadz11.ns View Post

Then its some other problem.
As for vibes in the handle bars, i too have them for a couple of thousand kms

don't know why..

Motul 300v, keep checking the oil level. When i used it last year, its level kept on decreasing. But at that time, the engine used to be extremely smooth.

How was your experience using Motul 300V? I feel the vibes have increased a lot and can be felt all over the bike.

Originally posted by yasirfz16 View Post

can i self adjust the fuel ratio?? As my bike`s engine is giving strong smell since 3-4 days and performance is somewhat low. Yesterday I went to yamah service centre and they said the ratio is right but i dont think so cuz engine gives smell on a very small ride....plzz help me

Why do you want to change the AFR? Firstly, diagnose other things before you tune the Carburetor. Also, what smell are you getting? By low performance, what exactly do you mean?

Performance can be low because of many parameters like Clogged Air Filter, burnt Spark Plug, improper maintained chain.

Sent from a phone that is Smart!!

**nadz11.ns** · 03-18-2015, 02:23 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by devils_friend View Post

How was your experience using Motul 300V? I feel the vibes have increased a lot and can be felt all over the bike.

I absolutely loved the oil. But due to limited availability and continuous decrease in its level, i didn't used it again. What i felt was the engine used to run smooth and had less noise. Gear shifts were also felt to be smooth. The bike had done ~25k kms at that time.

**Divya Sharan** · 03-18-2015, 03:43 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by devils_friend View Post

500kms done post fitting new tyre. No kat kat sound. Vibes are present all over the bike :banghead:. Couldn't find any defect in the tyre. Been using Motul 300V since past 500kms.

Sent from a phone that is Smart!!

Check for the other pointers I mentioned!

Originally posted by nadz11.ns View Post

Then its some other problem.
As for vibes in the handle bars, i too have them for a couple of thousand kms

don't know why..

Motul 300v, keep checking the oil level. When i used it last year, its level kept on decreasing. But at that time, the engine used to be extremely smooth.

That's because your axle bearings are gone. Get an overhaul done for both axle bearings/bushes. Front will have metal balls and rear tire will have black rubber bushes.
Also, sprocket slack/condition are known to introduce vibes.

**nadz11.ns** · 03-18-2015, 03:55 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by Divya Sharan View Post

That's because your axle bearings are gone. Get an overhaul done for both axle bearings/bushes. Front will have metal balls and rear tire will have black rubber bushes.
Also, sprocket slack/condition are known to introduce vibes.

Rear axle OH was done couple of months back. Had changed the alloy, tyre, bearings and bushes. Will do front axle OH soon. Chain-sprocket condition is fine as of now.
The vibes are in the front end. Handle bar, slightly in the tank. But handling is perfect.

**accuengineer** · 03-19-2015, 06:31 PM

Re: Yamaha FZ-16/ FZ-S

Hai guys

My baby underwent the heart transplant. Feels like brand new bike . Its hell to undergo the run in period again. Can't wait to reach 700 kms to blast her.
Cheers
Mathews
Sent from my GT-I9082 using xBhp Connect mobile app

**devils_friend** · 03-19-2015, 06:42 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by accuengineer View Post

Hai guys

My baby underwent the heart transplant. Feels like brand new bike . Its hell to undergo the run in period again. Can't wait to reach 700 kms to blast her.
Cheers
Mathews
Sent from my GT-I9082 using xBhp Connect mobile app

What was the reason for transplant? What all have you replaced?

**nadz11.ns** · 03-19-2015, 07:08 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by accuengineer View Post

Hai guys

My baby underwent the heart transplant. Feels like brand new bike . Its hell to undergo the run in period again. Can't wait to reach 700 kms to blast her.
Cheers
Mathews

So its done.

Now let her to tease you for a while..

And what parts were changed apart from the usual ?

**accuengineer** · 03-19-2015, 09:29 PM

Re: Yamaha FZ-16/ FZ-S

Changed the bore, piston along with connecting pins , inlet valve, exhaust valve, piston rings, clutch push rod, packings various types and last but not the least engine oil motul 3000
Spare cost 3500 and labour 1500
Cheers
Mathews

Sent from my GT-I9082 using xBhp Connect mobile app

**accuengineer** · 03-19-2015, 09:30 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by devils_friend View Post

What was the reason for transplant? What all have you replaced?

White smoke and black smoke, uneven engine idling and lost of power
Cheers
Mathews

Sent from my GT-I9082 using xBhp Connect mobile app

**prats96742** · 03-20-2015, 01:20 AM

Re: Yamaha FZ-16/ FZ-S

Hello . i m pratik from kolkata. I am facing this same issue of white smoke and black smoke.
Can you please guide me regarding this as you have allready dealt with this situation.
Thank you

Sent from my HM NOTE 1W using xBhp Connect mobile app

**yasirfz16** · 03-20-2015, 01:58 AM

Re: Yamaha FZ-16/ FZ-S

Originally posted by nadz11.ns View Post

Check the color of spark plug to see if Air-Fuel ratio is correct or not.
Post a pic of it here.

Yes, it can be adjusted. I will post the like to the procedure (mentioned by another member) later.

I recently cleaned my spark plug so it is not rusted

----consecutive posts auto-merged-----

Originally posted by devils_friend View Post

How was your experience using Motul 300V? I feel the vibes have increased a lot and can be felt all over the bike.

Why do you want to change the AFR? Firstly, diagnose other things before you tune the Carburetor. Also, what smell are you getting? By low performance, what exactly do you mean?

Performance can be low because of many parameters like Clogged Air Filter, burnt Spark Plug, improper maintained chain.

Sent from a phone that is Smart!!

like smell of burning of excessive engine oil...low performance like low pickup and late response when throttle is twisted not a quick response....air filter is not clogged as i hve installed high performance air filter enabling clean air to curb...spark plug is recently cleaned using sand paper

----consecutive posts auto-merged-----

My bike1s engine is presntly sealed and its 6 year of my bike its a 2009 model but some owners here on this said to get checked the clutch plates...i just want to knw whether gettng clutch plates checked in yamaha service cntre will break the seal or not of engine???

**dude_creative** · 03-20-2015, 08:24 AM

Re: Yamaha FZ-16/ FZ-S

Originally posted by yasirfz16 View Post

I recently cleaned my spark plug so it is not rusted

My bike1s engine is presntly sealed and its 6 year of my bike its a 2009 model but some owners here on this said to get checked the clutch plates...i just want to knw whether gettng clutch plates checked in yamaha service cntre will break the seal or not of engine???

Have you missed out these things - cleaning the oil filter, dismantle and clean carburetor, clean the fuel filter that is inside petcock. These could cause problems in my view

Announcement

Yamaha FZ-16/ FZ-S

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment