Announcement

**sinnerz2000** · 02-09-2013, 10:00 PM

Re: Honda Unicorn

Originally posted by arjunb25 View Post

the foot pegs is a good thing can consider it for my unicorn but one question still comes in my mind what all I need to buy here only the foot pegs or the gear leaver too. from karzima right well if the back problem can get over nothing like investing 1000rs.

I found out the price for parts in the hero showroom, its way more than what i estimated, Bro the parts we need is the 1)silver aluminium piece (in karizma to which the foot pegs are attached)- 1500 each so we need two of them 2) gear shift lever- 200rs 3) brake lever 200rs, 4) foot pegs -about 300rs so total expense for this mod is around rs3700 if we buy brand new parts. So we need to go to some junkyard probably to source the parts if we want it for cheap

**arjunb25** · 02-10-2013, 01:42 PM

Thanx for the news I am happy for what the company has given let it be like this. For good as the money is a lot buddy not worth going ahead but yes something for the handle bars I would love to let see.

**ashwinprakas** · 02-10-2013, 01:51 PM

Originally posted by sinnerz2000 View Post

I want to move my UNIS gear and break more back like this person has done, any idea how he did it?
Edit- I found out now, we can use karizmas footset to do this, it will turn out to look like this-

The gear lever and foot pegs are Karizma's, but I dont recognize the side sets.

Have a look guys.

**sinnerz2000** · 02-10-2013, 05:37 PM

Re: Honda Unicorn

Originally posted by ashwinprakas View Post

The gear lever and foot pegs are Karizma's, but I dont recognize the side sets.

Have a look guys.

Yup the whole set seems to be from the hunk, but the karizma zma,zmr and the 2012 cbz extreme sets also are a direct fit, the only issue is they're too expensive. And as for the handle bar my mech said the zmr handle bar won't fit on the uni, so there's still no 2 piece handle bar for our bike

**ashwinprakas** · 02-10-2013, 06:41 PM

Originally posted by sinnerz2000 View Post

Yup the whole set seems to be from the hunk, but the karizma zma,zmr and the 2012 cbz extreme sets also are a direct fit, the only issue is they're too expensive. And as for the handle bar my mech said the zmr handle bar won't fit on the uni, so there's still no 2 piece handle bar for our bike

ZMR Clip ons??? You must be crazy! They cost a fortune. :O
Measure the fork dia and go for after market clip ons. I know a fellow Xbhpian using Gixxer clipons in his Fazer, they're imported and cost around 2~3k INR.

**sinnerz2000** · 02-10-2013, 07:09 PM

Re: Honda Unicorn

Originally posted by ashwinprakas View Post

ZMR Clip ons??? You must be crazy! They cost a fortune. :O
Measure the fork dia and go for after market clip ons. I know a fellow Xbhpian using Gixxer clipons in his Fazer, they're imported and cost around 2~3k INR.

No the problem is we cannot use just any clipons on uni cost the tank is high and broad, so it will definately touch, I said zmr cozy Karizma and uni have similar tanks

**ashwinprakas** · 02-10-2013, 07:15 PM

Originally posted by sinnerz2000 View Post

No the problem is we cannot use just any clipons on uni cost the tank is high and broad, so it will definately touch, I said zmr cozy Karizma and uni have similar tanks

There's an extremely cheap thingi which people who go for clip-ons do, its called fork extending, BlackPanther had both his forks extended for 100~150/- on his ZMA. Just take both forks to a reputable lathe and get it done.

**arjunb25** · 02-10-2013, 07:36 PM

Here is my lovely machine with the new rim tapes. She looks outstanding.

Yes the price for changing is too much 3700rs is a lot buddy too much. I am happy the way she is yes one thing I might change is a short handle bar. Lets see shall do the mods and post the snap.

**Fur007** · 02-10-2013, 08:07 PM

Originally posted by arjunb25 View Post

Here is my lovely machine with the new rim tapes. She looks outstanding. Yes the price for changing is too much 3700rs is a lot buddy too much. I am happy the way she is yes one thing I might change is a short handle bar. Lets see shall do the mods and post the snap.

3700rs just for rim tapes???

**sinnerz2000** · 02-10-2013, 08:32 PM

Re: Honda Unicorn

Originally posted by Fur007 View Post

3700rs just for rim tapes???

3700 for rim tapes or new rims with rim tapes pre installed?

**sinnerz2000** · 02-11-2013, 01:08 AM

Re: Honda Unicorn

Originally posted by ashwinprakas View Post

There's an extremely cheap thingi which people who go for clip-ons do, its called fork extending, BlackPanther had both his forks extended for 100~150/- on his ZMA. Just take both forks to a reputable lathe and get it done.

Yea but that's a permanent mod, I can't reverse it if I want, I'm looking for direct fitting parts without any welding works

**arjunb25** · 02-11-2013, 10:34 AM

Originally posted by Fur007 View Post

3700rs just for rim tapes???

Hahahahaha no no buddy for the rim tapes I just paid 100 rs, well as far as 3700rs is concerned I was referring to @sinnerz2000 post which he was saying that he has got the rate list from hero on that note I was saying that it is expensive.

ok guys suggest me I want to put short handle bars I think not to go in for the after market clip ons rather I should go for like we have in stock but short in size. What say friends.

**sinnerz2000** · 02-11-2013, 03:00 PM

Re: Honda Unicorn

Originally posted by arjunb25 View Post

Hahahahaha no no buddy for the rim tapes I just paid 100 rs, well as far as 3700rs is concerned I was referring to @sinnerz2000 post which he was saying that he has got the rate list from hero on that note I was saying that it is expensive.

ok guys suggest me I want to put short handle bars I think not to go in for the after market clip ons rather I should go for like we have in stock but short in size. What say friends.

Short handlebar will just make your handling worse

**arjunb25** · 02-11-2013, 09:10 PM

@sinnerz2000: thanx buddy for the suggestion.

Yes the short handle bar cannot be put on unicorn until and unless u r ready to do some mods on it. As for the clip ones he just refused me today straight away saying sorry as it will disturb while taking left or right as the handle bar will hit the tank and also spoil it. Hence me not going for it and for the ug3 pulsar handle bar my city is out of stock for good as every one has stopped calling for it. What the hell. anyways have to stick to it so I am happy. Challo no expenditure at the end net savings.

**sinnerz2000** · 02-11-2013, 09:50 PM

Re: Honda Unicorn

Originally posted by arjunb25 View Post

@sinnerz2000: thanx buddy for the suggestion.

Yes the short handle bar cannot be put on unicorn until and unless u r ready to do some mods on it. As for the clip ones he just refused me today straight away saying sorry as it will disturb while taking left or right as the handle bar will hit the tank and also spoil it. Hence me not going for it and for the ug3 pulsar handle bar my city is out of stock for good as every one has stopped calling for it. What the hell. anyways have to stick to it so I am happy. Challo no expenditure at the end net savings.

You can probably go for fz handlebar, its shorter by height but not by width, its not a 2 piece bar but I'm sure it won't touch the tank, u can ask ur mech

Announcement

Honda Unicorn

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment