Tweet
Re: Yamaha YZF-R15 version 2.0
Hey guys how do i set my engine idle on my r15v2 im unable to find the adjustment screw!.Please help!
Hey guys how do i set my engine idle on my r15v2 im unable to find the adjustment screw!.Please help!
-
Last edited by PallavZ; 03-10-2015, 10:33 PM. -
Re: Yamaha YZF-R15 version 2.0
An incident -
Had been to Arjun Motors in mysore for my fuel injector cleaning.
I went there at 2.30 in the afternoon as i had classes in the morning.
There was no one to attend my bike.
Had to wait in the scorching heat for 15 minutes for some guy to come and attend my bike.
Then a guy comes and tells me that im late and told me to come tomorrow.
I asked him why and he was like there are too many bikes for servicing.
To my knowledge, there weren't many.
Then i tried convincing him to do it now as i had classes tomorrow morning too.
All of a sudden he went mad over me and even threatened me.
I was totally shocked and i returned back.
Thinking of the situation, now i feel that i should do something about it.
He cannot treat a customer that way!
Can someone please let me know the e-mail address of yamaha so that i can shoot a mail in this regard?
Thank you!
Honda Dio [2010 - 2011]
Yamaha YZF R15 V2 [2011 - Present]
Yamaha YZF R3 [2016 - Present]
What's next? :)Comment
-
Re: Yamaha YZF-R15 version 2.0
There is a "Contact Us" option on the Yamaha India website. Complaint them through that.An incident -
Had been to Arjun Motors in mysore for my fuel injector cleaning.
I went there at 2.30 in the afternoon as i had classes in the morning.
There was no one to attend my bike.
Had to wait in the scorching heat for 15 minutes for some guy to come and attend my bike.
Then a guy comes and tells me that im late and told me to come tomorrow.
I asked him why and he was like there are too many bikes for servicing.
To my knowledge, there weren't many.
Then i tried convincing him to do it now as i had classes tomorrow morning too.
All of a sudden he went mad over me and even threatened me.
I was totally shocked and i returned back.
Thinking of the situation, now i feel that i should do something about it.
He cannot treat a customer that way!
Can someone please let me know the e-mail address of yamaha so that i can shoot a mail in this regard?
Thank you!
The service center people have absolutely no right to talk harshly to the customer.
Ride safe and have fun.
Regards
NadeemComment
-
Re: Yamaha YZF-R15 version 2.0
Firstly get the name of the employee who threatened you,meet the manager of the SVC and forward a official complaint mentioning the experience you had with one of their employee.An incident -
Had been to Arjun Motors in mysore for my fuel injector cleaning.
I went there at 2.30 in the afternoon as i had classes in the morning.
There was no one to attend my bike.
Had to wait in the scorching heat for 15 minutes for some guy to come and attend my bike.
Then a guy comes and tells me that im late and told me to come tomorrow.
I asked him why and he was like there are too many bikes for servicing.
To my knowledge, there weren't many.
Then i tried convincing him to do it now as i had classes tomorrow morning too.
All of a sudden he went mad over me and even threatened me.
I was totally shocked and i returned back.
Thinking of the situation, now i feel that i should do something about it.
He cannot treat a customer that way!
Can someone please let me know the e-mail address of yamaha so that i can shoot a mail in this regard?
Thank you!
Sent from my XT1022 using xBhp Connect mobile appComment
-
Re: Yamaha YZF-R15 version 2.0
Today,when I checked the front brake fluid reservoir.I saw a bubble through the glass of the reservoir which might indicate that I'm low on brake fluid.Should I wait till the next service to top up or should I get it topped up right away.
How much does the SVC charge for brake fluid top up.
Sent from my XT1022 using xBhp Connect mobile appComment
-
Re: Yamaha YZF-R15 version 2.0
thanks Abhi599Comment
-
Determining manufacturing date of r15
Hi guys, I'm going to collect my r15 day after tomorrow can anyone tell me how to check the manufacturing date from the chassis no? The dealer is saying that it is a 2015 model but I'm not quite sure. Thanks in advance
Sent from my Q1000 using xBhp Connect mobile appComment
-
Re: Yamaha YZF-R15 version 2.0
Hey wassup guys
just wanted to ask or tell something
like i just got to know that the brake fuild of my bike had never been changed and its over 5-6 years sine i bought it
so i went to thr showroom to get it changed
and the guy there was like:"why do u need to chge it, see the brake lever are tight so no need"
i told him that it should be changed every 2 years and because moisture gets in
he was like nope no need to change and look it is completely sealed so moisture cant go it
i mean wtf
i want to get it change
you only have the right to explan to me why not
you have no right to stop me
totally pissed by themComment
-
Re: Yamaha YZF-R15 version 2.0
Hey guys I was wandering how do I shift smoothly around full revs. Whenever I shift after 8000 revs the bike's tranny makes a bang is it harmful.?Comment
-
Re: Yamaha YZF-R15 version 2.0
Hello guys!
Greetings from Singapore.
Have been religiously following this thread for about a year now and only registered recently after facing this minor issue.
Here is my bike as introduction.
I had a accident about 2 weeks back involving a car hitting me from the side causing me to skid and fall on the left.
Got fairing replaced, headlight cowl and I noticed that when steering my bike towards the left, the handlebar is able to steer till it "crushes" my fingers between the tank. On the right, it has no issue as the maximum turning radius allows my fingers to be within a safe distance from the tank.
Here are some pictures
Any idea on what could the issue be?
Thanks in advance guys!Comment
-
Re: Yamaha YZF-R15 version 2.0
Originally posted by PallavZ View Post
Whats a tranny? I googled tranny and it said transgender. your transgender makes a bang?
the loud noise is probably the chain noise. Its normal. You're probably banging (and not pushing) the gear lever to shift it? that usually causes that. It is supposed to be normal actually. dont be aggressive on the gearshifts. leads to higher wear and tear.Comment
-
Re: Yamaha YZF-R15 version 2.0
Lol, I think he meant transmission...Originally posted by hatebreeder View Post
Sent from my Nexus 5 using xBhp Connect mobile appComment
-
Re: Yamaha YZF-R15 version 2.0
I know.Originally posted by Gurudatt View PostLol, I think he meant transmission...
Sent from my Nexus 5 using xBhp Connect mobile app
----consecutive posts auto-merged-----
Question: Has the Right hand side handlebar gap from the tank increased? Is it more than what it normally is? or Is it just that the left gap is reduced? Cause the handle bars are clip-on. maybe it managed to twist at the bolt? When the handle bar is dead straight is the gap between handlebar end and tank the same?Originally posted by alwaysusing View PostHello guys!
Greetings from Singapore.
Have been religiously following this thread for about a year now and only registered recently after facing this minor issue.
Here is my bike as introduction.
I had a accident about 2 weeks back involving a car hitting me from the side causing me to skid and fall on the left.
Got fairing replaced, headlight cowl and I noticed that when steering my bike towards the left, the handlebar is able to steer till it "crushes" my fingers between the tank. On the right, it has no issue as the maximum turning radius allows my fingers to be within a safe distance from the tank.
Here are some pictures
Any idea on what could the issue be?
Thanks in advance guys!Comment
-
Re: Yamaha YZF-R15 version 2.0
Did not notice if there is a increase in gap but I remember having space for my fingers when I full lock the steering.Originally posted by hatebreeder View PostI know.
----consecutive posts auto-merged-----
Question: Has the Right hand side handlebar gap from the tank increased? Is it more than what it normally is? or Is it just that the left gap is reduced? Cause the handle bars are clip-on. maybe it managed to twist at the bolt? When the handle bar is dead straight is the gap between handlebar end and tank the same?Comment
Comment