Announcement

**sumedh11n** · 05-31-2015, 02:28 PM

Re: Pulsar 200 NS Owners Review and Experiences

Is it necessary to avail all free and paid services to claim for warranty?
One of my friend suggested me not to give my bike for 3rd free service (currently 2 service done), because those people will ruin your bike as they know that you won't be coming again for paid services. Is this true?
I am also not comfortable with giving my bike for service to svc because they do not perform the servicing well and upto the mark, they don't know much about NS's engine much.
Is it mandatory to get paid service done, or should i give it to a good local mechanic (suggest me if there's any trustworthy mechanic in Navi mumbai area).
Awaiting replies! Thank you!

**Ashref** · 05-31-2015, 02:59 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by krixna View Post

About the free play, no idea what you are trying to say. Clearance between pad and disc would be like 0.1mm. The holes maybe for some future upgrade like fitting a sensor for ABS. It is like that in my bike too. If you are talking of the radiator fan, don't worry. Under normal conditions, the wind blowing through the radiator (when the vehicle is in motion) is enough to keep temperature under control.
Sent from my CRXT 1125Q using xBhp Connect mobile app

I don't mean that gap between disc pad and the disc. But when I push the disk side wards, it rattles. While riding on uneven roads, it makes a slight but non ignorable sound like Thad Thad!!

**Saurabh Umadikar** · 05-31-2015, 03:00 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by sumedh11n View Post

Is it necessary to avail all free and paid services to claim for warranty?
One of my friend suggested me not to give my bike for 3rd free service (currently 2 service done), because those people will ruin your bike as they know that you won't be coming again for paid services. Is this true?
I am also not comfortable with giving my bike for service to svc because they do not perform the servicing well and upto the mark, they don't know much about NS's engine much.
Is it mandatory to get paid service done, or should i give it to a good local mechanic (suggest me if there's any trustworthy mechanic in Navi mumbai area).
Awaiting replies! Thank you!

Firstly the manual says that all the free services should be done timely to avail the warranty.
Secondly its depends on how friendly is your SVC is in this matter.
In btw where do you stay in Navi Mumbai?

**optiprime** · 05-31-2015, 03:57 PM

Re: Pulsar 200 NS Owners Review and Experiences

Yesterday i had gone for allign projector headlight to downwards ,after adjustment that mechanic did what i dont know but my LHS swich backlits are not glowing. What is the cause if he damaged the whole switch or wire electrically sorted? Also dont wanna go to that mechanic again for anymore trouble though i scold him a lot.

Any suggetions?

**krixna** · 05-31-2015, 03:58 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by Ashref View Post

I don't mean that gap between disc pad and the disc. But when I push the disk side wards, it rattles. While riding on uneven roads, it makes a slight but non ignorable sound like Thad Thad!!

Get those six socket screws holding the disc tightened - immediately!

Sent from my CRXT 1125Q using xBhp Connect mobile app

**Ashref** · 05-31-2015, 04:01 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by krixna View Post

Get those six socket screws holding the disc tightened - immediately!

Sent from my CRXT 1125Q using xBhp Connect mobile app

Thanks for the reply. I could take it to SVC only tomorrow. But, the Allen screws go inside the disk. Is it possible That spacers are missing?

**John P Daniel** · 05-31-2015, 04:27 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by Ashref View Post

Thanks for the reply. I could take it to SVC only tomorrow. But, the Allen screws go inside the disk. Is it possible That spacers are missing?

No spacers are used. The screws hold the disk so disc is flat at surface level and hence they go inside the disc. Simply tighten the disc screws tightly is soon as possible.

Sent from my C6903 using xBhp Connect mobile app

**krixna** · 05-31-2015, 04:44 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by Ashref View Post

Thanks for the reply. I could take it to SVC only tomorrow. But, the Allen screws go inside the disk. Is it possible That spacers are missing?

The screws can become loose if the disc develops warpage due to several reasons. Or, it developed warpage and brakes begin biting. Guy took it to svc. No spare. Mechanic loosens all screws a bit so that disc adjusts itself while braking, without biting.

Yea, there is no spacer in btw. Just put in the screws and torque them after seating the disc evenly (by mild tighting of screws first in sequence)

Sent from my CRXT 1125Q using xBhp Connect mobile app

**sumedh11n** · 05-31-2015, 05:53 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by Saurabh Umadikar View Post

Firstly the manual says that all the free services should be done timely to avail the warranty.
Secondly its depends on how friendly is your SVC is in this matter.
In btw where do you stay in Navi Mumbai?

Nerul.
where u give ur NS for service?

**Saurabh Umadikar** · 05-31-2015, 05:56 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by sumedh11n View Post

Nerul.
where u give ur NS for service?

Bro, I stay in Vashi. Actually one of my friend has a NS200 and he services his Bike from a local mechanic in Vashi itself.
I'll be getting my new bike at the corner of the month of June.

**Ashref** · 05-31-2015, 07:42 PM

Re: Pulsar 200 NS Owners Review and Experiences

Thank you all. Got it fixed. My rear brake had near zero bite previously. Now its bite has improved.

**maninderz** · 05-31-2015, 08:29 PM

Re: Pulsar 200 NS Owners Review and Experiences

Brothers do our bike start while both slave plug wires are disconnected and only main plug connected?

Sent from my SM-G900H using xBhp Connect mobile app

**deep007** · 05-31-2015, 08:39 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by maninderz View Post

Brothers do our bike start while both slave plug wires are disconnected and only main plug connected?

Sent from my SM-G900H using xBhp Connect mobile app

Yes

Sent from my GT-N7000 using xBhp Connect mobile app

**krixna** · 05-31-2015, 10:28 PM

Re: Pulsar 200 NS Owners Review and Experiences

Originally posted by maninderz View Post

Brothers do our bike start while both slave plug wires are disconnected and only main plug connected?

Sent from my SM-G900H using xBhp Connect mobile app

For that matter, it will start with any one plug working. I checked

Sent from my CRXT 1125Q using xBhp Connect mobile app

**maninderz** · 05-31-2015, 11:05 PM

Re: Pulsar 200 NS Owners Review and Experiences

Thanks for replying brothers.

Mine cdi was gone, so changed it with a new one and now bike is not revving more than 7k rpm. Have changed both slave plugs but master one is old and have not checked it,
And bike is not starting while master plug is connected but is starting if any one slave is connected.

So its just plug gone kaput?

Sent from my SM-G900H using xBhp Connect mobile app

Announcement

Pulsar 200 NS Owners Review and Experiences

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment