Announcement

**pv1984** · 05-18-2013, 02:43 PM

Re: Pulsar 200 NS

Originally posted by arjunb25 View Post

what is the average you all are getting on your beloved machines? I am asking this because of 2 reasons.
1. My friend is fed up he is just getting 25 km/ltr from the day he got his bike he has done 4000 km till now. He has done a lot and asked me to ask u all what could be the problem.
2. A new machine in the same frame is going to be launched by bajaj soon pulsar 180 ns.

Response below :

1) As per the mileage being low, that is way too low. Have him check the tuning of the Carb. Also depends on the riding style but its way too low.
2) Regarding Pulsar 180 ns , there is no confirmation from Bajaj about the same. It might be 180 or 150 or sub 200cc bike.

**broken87** · 05-18-2013, 05:37 PM

Re: Pulsar 200 NS

also the tire pressure affects mileage right ? also plz ask your friends to make minimal use of the brakes. don't shift too much.

**B7ACKTHORN** · 05-18-2013, 07:11 PM

Re: Pulsar 200 NS

Originally posted by Aditya N Bharadwaj View Post

Well that's a solution but I was wondering if we can somehow extend the pipe so that it still stays concealed and yet takes in air from somewhere cooler, like just behind the headlamp or something. What I meant to say was that the air gets heated up and not the pipe itself. So thermally insulating the pipe wouldn't stop hot air now would it?

Edit: I almost never experience B2B traffic so it wouldn't be of much use to me. I was wondering if this might help those who actually do.

Heat is heat no matter what, all you can do is reduce the perforation of heat to the tube to air. But one thing you need to keep in mind, the heat transferring into the pipe isn't gonna heat the air to super temperatures, it's just very minimal. But if you use a thermal insulation it *will reduce* the heat transfer dissipated from the engine. You got what I mean? Simple and trust me you won't see any difference even after the jugaad fix.

Originally posted by broken87 View Post

also the tire pressure affects mileage right ? also plz ask your friends to make minimal use of the brakes. don't shift too much.

Low tire pressure means more workload for the engine, which means more power required to move the bike which equals more fuel consumption which ultimately equates to LOW MILEAGE.

Cheers!
VJ

**BS_Chauhan** · 05-18-2013, 08:21 PM

Re: Pulsar 200 NS

Any one here knows where can I get "3M Imperial wetordry automotive sandpaper" in bangalore. My bike happened to fall down and got some scratches on head lamp, I found that there is no way to replace just the head light glass, itseems that the whole dome has to be replaced, since the scratch is very minimal its not worth of replacing the whole dome. I did a quick google search and found using this sand paper scratches on the glass can be removed but found it no were in bangalore, Or is there any ways I can get rid of the scratch from my headlamp.??

Thanks.

**vaibhav93** · 05-18-2013, 10:51 PM

Re: Pulsar 200 NS

What happened if my bike is overheated...? Bike dont start...?
Help

**Aditya N Bharadwaj** · 05-18-2013, 11:09 PM

Re: Pulsar 200 NS

Originally posted by vaibhav93 View Post

What happened if my bike is overheated...? Bike dont start...?
Help

So you mean to say you know cases where that's happened?

**vaibhav93** · 05-18-2013, 11:10 PM

Re: Pulsar 200 NS

Originally posted by Aditya N Bharadwaj View Post

So you mean to say you know cases where that's happened?

Ya yes brother

**B7ACKTHORN** · 05-19-2013, 12:58 AM

Re: Pulsar 200 NS

Originally posted by vaibhav93 View Post

What happened if my bike is overheated...? Bike dont start...?
Help

Your bike will try its best to not to oveheat with the cooling system it has either air or liquid. But then if all else fails, it will give you sluggish performance, and if it keeps running on and on, the engine will seize abrupt.

Cheers!
VJ

**vaibhav93** · 05-19-2013, 01:15 AM

Re: Pulsar 200 NS

Bike will stop suddenly after getting really hot ...?

**broken87** · 05-19-2013, 06:56 AM

Re: Pulsar 200 NS

Originally posted by vaibhav93 View Post

Bike will stop suddenly after getting really hot ...?

I feel that would happen in worst conditions only. But aren't we supposed to see a blinking high temperature warning in the console before things go that bad ? Why don't you tell us what actually happened with your bike

.. oh btw this summer is at it's peak.. and man that radiator fan WORKS!

**The Monk** · 05-19-2013, 09:18 AM

Re: Cylinder head mod

Originally posted by hypnosis View Post

Hello,im new to xbhp. im planning to get my pulsar 200ns cylinder head modded at race concepts. when they said cylinder head mod,i assumed its porting and intake mod..i hope im not wrong. is it worth it?.will i get any performance gains? im worried about reliability issues compared to stock. right now im running a rich mixture..(117.5 main jet compared to stock 115) with the stock filter. i have a pretty decent acceleration and a top speed of around 150kmph. bt i want a bit mre power ..will the cylinder head mod help me?

Approved and Merged

**gugan raj** · 05-19-2013, 10:43 AM

Re: Cylinder head mod

hi frnds am frm chennai, am doing engg 3rd year, i too have a prbm,,,,, my ns engine is noisy... the only thing i hate in my ns is noise,,, am feeling more uncomfortable while riding without helmet,,,, it sounds like shaking a metal can stuffed with lots of coins........ is it normal in all ns????? and clutch action so hard... i have to ride 50 kms daily in city, so feeling uncomfortable.... actually my fingers are paining..... my speedo is about 6000kms..... finished second service..... i told about this in every service i did,,,,, but only answer i got is,, " SOUND LL BE LIKE THIS ONLY" pllllllllllllllllllllllllllzzzzzzzzzzzzzzzzzzzzzzz zzzz help me out frnds, ppppppppppplllllllllllllllllllzzzzzzzzzzzzzzzz guide me.... is there any modification shld i do,??? suggest some service centres in chennai, where serviceman was technically sound,,,,,

**J K** · 05-19-2013, 11:45 AM

Re: Cylinder head mod

Originally posted by gugan raj View Post

hi frnds am frm chennai, am doing engg 3rd year, i too have a prbm,,,,, my ns engine is noisy... the only thing i hate in my ns is noise,,, am feeling more uncomfortable while riding without helmet,,,, it sounds like shaking a metal can stuffed with lots of coins........ is it normal in all ns????? and clutch action so hard... i have to ride 50 kms daily in city, so feeling uncomfortable.... actually my fingers are paining..... my speedo is about 6000kms..... finished second service..... i told about this in every service i did,,,,, but only answer i got is,, " SOUND LL BE LIKE THIS ONLY" pllllllllllllllllllllllllllzzzzzzzzzzzzzzzzzzzzzzz zzzz help me out frnds, ppppppppppplllllllllllllllllllzzzzzzzzzzzzzzzz guide me.... is there any modification shld i do,??? suggest some service centres in chennai, where serviceman was technically sound,,,,,

First of all, ride WITH HELMET always.
Make post clean and neat. Don't write like that ppplllzz like that.

Which engine oil are you using? When was the last oil change?

**gugan raj** · 05-19-2013, 12:54 PM

Re: Cylinder head mod

sorry, this is my first post, here after my posts will be clean and neat.... and always i used ride with helmet only and how can use it while roaming within my area . then the oil am using is bajaj oil only which they recommending in service centres..... oil changed in both services..(427kms and 4972kms).

----consecutive posts auto-merged-----

hi frnds am from chennai, am doing engg 3rd year, i too have a prbm,,,,, my ns engine is noisy... the only thing i hate in my ns is noise,,, am feeling more uncomfortable while riding without helmet,,,, it sounds like shaking a metal can stuffed with lots of coins........ is it normal in all ns? and clutch action is so hard... i have to ride 50 kms daily in city, so feeling uncomfortable.... actually my fingers are paining..... my speedo is about 6000kms..... finished second service..... i told about this in every service i did,,,,, but only answer i got is,, " SOUND LL BE LIKE THIS ONLY" please help me out frnds, please guide me.... is there any modification should i do,??? suggest some service centres in chennai, where serviceman were technically sound,,,,, am using bajaj oil as svc recommend

**spknair** · 05-19-2013, 03:21 PM

Re: Pulsar 200 NS

Originally posted by Aditya N Bharadwaj View Post

Of course revving hard. The vibes kick in post 6k rpm. That's when you realise what you're riding isn't a calm unicorn but a roaring pulsar

There are mild vibes at the footpegs above 8k rpm but nil before that. Lately there's some buzzing vibe noise from the rear seat cowl but I guess tightening up a few bolts should do the job. I located the source but I don't have the right tools for it yet.

Just by curiosity.....
Have you ever ridden other Pulsars ???
ie 150, 180 or 220 ??
Can you compare with those ( vibrations; not vibrating sound

)

Originally posted by J K View Post

Will clutch less up shifting decrease/increase mileage?
In my knowledge, it will increase, because less clutch is used.

of-course Nooooo !!!!!!!!!!
It will decrease your clutch plate mileage, nothing more.
There is is "point" where we can shift gear without clutch. You have to be used to it, to reduce wear&tear
Bus drivers usually shift gears without using clutch

Originally posted by J K View Post

Thank you bro. It might be those petrol bunk guys

My bad luck.

By my knowledge, it is not a fault by the petrol. (may be the quantity

)

Originally posted by gugan raj View Post

hi frnds am frm chennai, am doing engg 3rd year, i too have a prbm,,,,, my ns engine is noisy... the only thing i hate in my ns is noise,,, am feeling more uncomfortable while riding without helmet,,,, it sounds like shaking a metal can stuffed with lots of coins........ is it normal in all ns????? and clutch action so hard... i have to ride 50 kms daily in city, so feeling uncomfortable.... actually my fingers are paining..... my speedo is about 6000kms..... finished second service..... i told about this in every service i did,,,,, but only answer i got is,, " SOUND LL BE LIKE THIS ONLY" pllllllllllllllllllllllllllzzzzzzzzzzzzzzzzzzzzzzz zzzz help me out frnds, ppppppppppplllllllllllllllllllzzzzzzzzzzzzzzzz guide me.... is there any modification shld i do,??? suggest some service centres in chennai, where serviceman was technically sound,,,,,

Are you new to Pulsar ???
It is noisy

P200NS is more noisy by its drive chain. let it lubricated every 300 KMs
I suggest "release-on" chain lube, which is economical & great. I haven't used Motul

Announcement

Pulsar 200 NS Owners Review and Experiences

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment