Announcement

**akfara** · 01-13-2011, 08:36 PM

Originally posted by neilhamish View Post

Hi dear GSPians,
My bike fell down & had to change the headlight assembly & doom.After refixing everything, my bike produces a grinder sound while accelerating & decelerating at around 3500-4000rpm.It comes from visor area.I complained it at SC & they told it is rectified.After 2-3 days it came back.Now i am again going to SC to complain about the same.What may be the reason..any comments about this....

you need to replace the visor screws with pulsar one with rubber bush,cost only 30Rs,...try to find which screw making that sound and replace it accordingly ,if u have doubt ,go back previous pages as already discussed about it...
IF it is the visor then this is the solution

, normally in this thread GS owners calling this mixer grinder sound from engine only,not from visor

**Maestro** · 01-13-2011, 08:39 PM

GUYS........please try sticking to english language!!!!
i cant understand

**akfara** · 01-13-2011, 08:50 PM

Originally posted by vishnukmd View Post

Even nowadays? CAN'T STOP LAUGHING; KINDLY DON'T MAKE ME LAUGH AGAIN.

sure sir

.you didn't tell us where is ur remote village?

and how ur both SUZUKI's survive there

**neilhamish** · 01-13-2011, 08:57 PM

Originally posted by akfara View Post

you need to replace the visor screws with pulsar one with rubber bush,cost only 30Rs,...try to find which screw making that sound and replace it accordingly ,if u have doubt ,go back previous pages as already discussed about it...
IF it is the visor then this is the solution

, normally in this thread GS owners calling this mixer grinder sound from engine only,not from visor

Thanks bro...But the sound coming from visor area is very louder than that of my engine..That is why i told it as mixer grinder sound & it resembles the same only...

**akfara** · 01-13-2011, 09:00 PM

Originally posted by Maestro View Post

GUYS........please try sticking to english language!!!!
i cant understand

Yes understood ur feeling

,But its out of topic nothing about GS nor about You br,this is for fun between interstate guys for a change in these thread

...I confirm this is not abusing someone...Ok we take ur words and we all discuss in Gnglish oops English

**Sumitdey1** · 01-13-2011, 09:01 PM

Originally posted by venuvinodks View Post

Pavan...its nice to know that your long bike trip was a success..just a curiosity..how you could carry luggage along with the pilion rider? you used any specialised bike touring bags ? Just curious.. if no problem, post a couple of pics too

Venu: I am Sumit not Pavan

I had fitted a big dicky on the right side of the GSR & for the left i got a sort of saddle bag.. images below, they are from a mobile camera, so not very good.

There is a guy in my area who makes these kind of bags..i got a ready-made one from him. Also i intend to get a tank bag made for the bike.

I had specifically attached the dicky & prepared straps for the saddle bag in such a way to leave enough space for my wife to comfortably keep her legs.

**MSN1** · 01-13-2011, 09:01 PM

Originally posted by akfara View Post

sure sir

.you didn't tell us where is ur remote village?

and how ur both SUZUKI's survive there

hope this language is okay for all

**akfara** · 01-13-2011, 09:05 PM

Originally posted by neilhamish View Post

Thanks bro...But the sound coming from visor area is very louder than that of my engine..That is why i told it as mixer grinder sound & it resembles the same only...

then if u have patience go through previous pages we discussed lot about visor and Finally Madhu changed to PULSAR screws with rubber bush(akfara super solutions

)..and confirmed till now its fine...

**Maestro** · 01-13-2011, 11:09 PM

Originally posted by akfara View Post

Yes understood ur feeling

,But its out of topic nothing about GS nor about You br,this is for fun between interstate guys for a change in these thread

...I confirm this is not abusing someone...Ok we take ur words and we all discuss in Gnglish oops English

i never wrote that it would be about ME......but was just curious to know what discussion is going on......

**vishnukmd** · 01-13-2011, 11:27 PM

Originally posted by neilhamish View Post

But the sound coming from visor area is very louder than that of my engine.

Pulsar and GS visor nuts and screws.

Replacing the 4 rubber mounted visor nuts will solve this problem. The mechanics may not have replaced it, either due to ignorance or unavailability. These nuts are not reusable as they deform in the first use due to shrinkage. It costs Rs. 10/- per piece.

You may perhaps have to readjust the screws for few more times.

There is nothing special with Pulsar nuts except that they are a little shorter and weaker. Someone approaching the GS dealer or sub-dealer was asked to buy Pulsar nuts because the original was not available in their SC. All Pulsars have more vibration than GS.

If you try, you can replace the nuts yourself. It is better to not depend the mechanics in simple matters.

**vishnukmd** · 01-13-2011, 11:32 PM

Originally posted by akfara View Post

sure sir.you didn't tell us where is ur remote village? and how ur both SUZUKI's survive there

Abdul Khadar,

Most welcome to our village. The survival is.... we survive.

**MSN1** · 01-13-2011, 11:48 PM

Originally posted by vishnukmd View Post

Abdul Khadar,

Most welcome to our village. The survival is.... we survive.

rich village guy i think you are one among the newly arrived onion millionaires

abdul i believe the below mentioned is his address

king of GS150R
s/o slingshot
door no 3 opposite to heat bakery
No 7 zeus street,
suzukipur
on fiero highway
next to shaolin city
showgun district
state of hayabusa
country name is Intruder

will join you just let me know the date when you are going

**MACH50** · 01-14-2011, 12:10 AM

I request to cease picking on Vishnukmd for whatever address his is,he is also our fellow GSpian afterall.

Shoguns and Fieros cater in remotely villages in mountains and you are sure to find some RD350 in some other villages in Haryana or Madhya Pradesh,a person with passion for bikes can do some things which may not be acceptable to many.

If he is really serving Suzuki's interest by being here (as suspected by many) then let him be.We only want Suzuki to do better.

Hence we need to stop our bullying activities before the Mods targets us on being reported.

Therefore brothers let us be mature and maintain the quality of GS150R ownership thread.

**MSN1** · 01-14-2011, 12:39 AM

Originally posted by MACH50 View Post

I request to cease picking on Vishnukmd for whatever address his is,he is also our fellow GSpian afterall.

Shoguns and Fieros cater in remotely villages in mountains and you are sure to find some RD350 in some other villages in Haryana or Madhya Pradesh,a person with passion for bikes can do some things which may not be acceptable to many.

If he is really serving Suzuki's interest by being here (as suspected by many) then let him be.We only want Suzuki to do better.

Hence we need to stop our bullying activities before the Mods targets us on being reported.

Therefore brothers let us be mature and maintain the quality of GS150R ownership thread.

Mach Bro,

Nothing serious and no bullying, most of us are engaged with tight job and hectic work schedule, instead of always talking technical stuffs at 100% just try at least 1 % of fun

its just kidding

Vishnu bro this is like a cafe break chat during hectic work schedules hope you already took it in sporty way

Thanks for the timely alert Mach, sorry if my words hurt anyone by any mean

Abdul

Pulsar bush can be used only if the default GS150R bush worn out

am using the Gulf oil for the past 1400 KMS now i would say its the next best to Motul.

This morning i got licensed to drive a vehicle with two more wheels

but during that time some one stolen my helmet at RTO office

with two and half on golden screw and between 1500 to 1600 on rpm at hot temp am getting good mileage, but that was not my idea as the tuning was done by ASS

**MACH50** · 01-14-2011, 01:01 AM

Originally posted by MSN1 View Post

Thanks for the timely alert Mach, sorry if my words hurt anyone by any mean

Its Okay MSN

........I knew something was brewing in here,you people were exchanging words I cannot understand and something really hush hush was going on.

Even many people told me many things........either I have proved them wrong here or just had simply ignored them when logic failed to invoke sense in them.

Finally,we pride ourselves in riding the GS150R,few had guts to buy that machine.

.......and giving away to provocation doesn't suit us.

Announcement

Suzuki GS150R

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment