Announcement

**prateek2210** · 12-07-2012, 12:45 PM

Originally posted by huntphani View Post

How about the DSG Moto entry level one it's 950 bucks

One more thing, if you had to buy a jacket scoyco (how much would this cost?? 3-4K?) and mc40 (1K) So let's say total combo 5K
Or joel's ffe which one would you go with? (I'm not sure about the price, would really appreciate if you could tell it instead of asking me to pm him? )

I haven't slept for last two days, so damn confused!

Sent from my iPhone using Tapatalk

I am using Scoyoco JK17 for past 2 years now, and trust me the protectors in scoyoco are far better than others (refer my signature, there is a comparison), but being a textile jacket you will be a roasted chicken in summers but it will do good in winters.
DSG Moto Mesh is good but somehow I didnt feel the palm area material not that good.
My vote in jacket goes to Cramster Breezer , I am getting it in few months too.
For gloves MX3, will serve you easily for minimum 2 years

Coming to exhaust , Joel's FFE will cost you 8600INR (including shipping), but as written by s1d, I would say RIDING GEAR should be the preference....anytime

**pcgamer** · 12-07-2012, 01:52 PM

Originally posted by madhav766 View Post

Alloy, disc, calipers and pads, mostly brakeline too. One line for the brake fluid. These are what I believe must be changed. Cost, about 10k. 1 or 2 thous here n there.

Ok. Thanks for the info

**huntphani** · 12-07-2012, 05:06 PM

TVS Apache RTR 180

Originally posted by prateek2210 View Post

I am using Scoyoco JK17 for past 2 years now, and trust me the protectors in scoyoco are far better than others (refer my signature, there is a comparison), but being a textile jacket you will be a roasted chicken in summers but it will do good in winters.
DSG Moto Mesh is good but somehow I didnt feel the palm area material not that good.
My vote in jacket goes to Cramster Breezer , I am getting it in few months too.
For gloves MX3, will serve you easily for minimum 2 years

Coming to exhaust , Joel's FFE will cost you 8600INR (including shipping), but as written by s1d, I would say RIDING GEAR should be the preference....anytime

How much did you get the jk17 for??

Sent from my iPhone using Tapatalk

**prateek2210** · 12-07-2012, 05:19 PM

Originally posted by huntphani View Post

How much did you get the jk17 for??

Sent from my iPhone using Tapatalk

That time it was 3300, now it has increased

**Satishrajdev** · 12-07-2012, 05:41 PM

I am about to buy new gloves, any other suggestions guys than MX3

**vishnu.leo** · 12-07-2012, 08:55 PM

Originally posted by madhav766 View Post

But why? Color change?

Sent from my WT19i

not for any color change...just had a DIY thought about that. superbright LEDs in lieu of the stock LEDs

Originally posted by prateek2210 View Post

If just the color change is priority you can get SMDs

problem is that the pilot lamps are now two seperate modules. not the old plug and play bulbs

(i think so...couldnt open up the whole module)
so didnt want to mess up the whole unit just for a trial run. SVC guys said that we have to buy the whole head unit as a piece,(LED DRLs not available as a seperate unit

)

**madhav766** · 12-07-2012, 09:10 PM

Re: TVS Apache RTR 180

Originally posted by vishnu.leo View Post

not for any color change...just had a DIY thought about that. superbright LEDs in lieu of the stock LEDs

problem is that the pilot lamps are now two seperate modules. not the old plug and play bulbs

(i think so...couldnt open up the whole module)
so didnt want to mess up the whole unit just for a trial run. SVC guys said that we have to buy the whole head unit as a piece,(LED DRLs not available as a seperate unit

)

Bullcrap. I have 2 headlight dooms and one entire assembly. I was told that everything inside the old headlamps was put into the new ones. I don't have the old LEDs.

Sent from my WT19i

**Mirhawk** · 12-07-2012, 09:12 PM

Originally posted by amit_purohit20 View Post

Hi, I too have the same bike as you have and stay in Pune

. Well 11k is good enough life for your brake pads. If you still go on using that your brake pads scratch the brake disk and the disk has to be replace or it looses its effectiveness. I also had the same problem and I am still repenting.

Well in brake pad there are wear marks and we need to observe on a regular basis to ensure that we dont go below the wear mark level.

I am having problem with the front brake pads now. They have started screetching again. I have already replaced the front brake disc pads few months before because the pads had got fried during my trip to Konkan. I really dont know how to deal with this screetching sound. I got it cleaned with a high pressure water nozzle and the sound stopped but not for long its back again.

Sorry for the late reply, had been away! Yeah there are some bear marks on My Disc too, had to ride the bike unfortunately as I had some important work to do that day! Btw, where do you live in Pune? I live on the yerawda side.

Also People, had been to a short trip of 200km recently. During this ride, we were speeding mostly at 100-110 given the roads were smooth stretch for nearly 160kms. What I noticed was, the bike seems to be more open to throtelling now, even when I ride in city. So is this My imagination or does things like these happen? Also since I'm done 11k km on My Bike, I was thinking about replacing My air filter and going for the GS 150R Paper air filter, used by Drifty, some time ago. So any body used it yet? Can You comment something related to it again Drifty?

**madhav766** · 12-07-2012, 09:37 PM

Re: TVS Apache RTR 180

Originally posted by Mirhawk View Post

Sorry for the late reply, had been away! Yeah there are some bear marks on My Disc too, had to ride the bike unfortunately as I had some important work to do that day! Btw, where do you live in Pune? I live on the yerawda side.

Also People, had been to a short trip of 200km recently. During this ride, we were speeding mostly at 100-110 given the roads were smooth stretch for nearly 160kms. What I noticed was, the bike seems to be more open to throtelling now, even when I ride in city. So is this My imagination or does things like these happen? Also since I'm done 11k km on My Bike, I was thinking about replacing My air filter and going for the GS 150R Paper air filter, used by Drifty, some time ago. So any body used it yet? Can You comment something related to it again Drifty?

Kantu

Sent from my WT19i

**huntphani** · 12-07-2012, 11:54 PM

if you say in 1000bucks price range then it'd be Scoyco MC40(1000), or Cramster MX3(1099) or DSG motomesh(950) seniors like prateek say mx3 is the best option in all these

**prateek2210** · 12-08-2012, 12:17 AM

Originally posted by huntphani View Post

if you say in 1000bucks price range then it'd be Scoyco MC40(1000), or Cramster MX3(1099) or DSG motomesh(950) seniors like prateek say mx3 is the best option in all these

Seniors???? Dont make me that old

**huntphani** · 12-08-2012, 12:36 AM

TVS Apache RTR 180

Yeah we are like xbhp kids and you are xbhp uncle

Sent from my iPhone using Tapatalk

**kantu** · 12-08-2012, 02:11 AM

^^ Lol uncle prateek !

Originally posted by Satishrajdev View Post

I am about to buy new gloves, any other suggestions guys than MX3

Whats your budget ?
Check out DSG gloves(1k~3k) and spartan pegasus(~3k)

Originally posted by Mirhawk View Post

thinking about replacing My air filter and going for the GS 150R Paper air filter ... So any body used it yet?

Been there done that!
Throttle response will be much better and 0-60 will also be quick, but it may damage some of the internals. diaphragm got punctured when I was using it, mech said it was due to un even air flow, not sure if filter alone was to be blamed.
Better stick to stock paper filter, stock engine oil. They do their job well.

**vishnu.leo** · 12-08-2012, 02:28 AM

Originally posted by madhav766 View Post

Bullcrap. I have 2 headlight dooms and one entire assembly. I was told that everything inside the old headlamps was put into the new ones. I don't have the old LEDs.

Sent from my WT19i

thats what the SVC guys said. both SVC at trivandrum.

guess they havent got the new model's spare parts yet.. went there to get a new 10A fuse which was blown out some days back(to stock it in the spare box), and the dumb guy gave me the old kinda fuse... and when i told him that new ones having socket type(blade) fuse, he started going through the catalogue.

neither did he find it , he even said that they are not having that kind of fuse at any SVC and i have to get it from some outside shop

damn , why are they even selling the new model here if they cant provide the exact spare parts.

P.S. just for trivandrum guys, the SVC i mentioned in the last is LOGTECH TVS.

**madhav766** · 12-08-2012, 09:13 AM

Re: TVS Apache RTR 180

Originally posted by vishnu.leo View Post

thats what the SVC guys said. both SVC at trivandrum.

guess they havent got the new model's spare parts yet.. went there to get a new 10A fuse which was blown out some days back(to stock it in the spare box), and the dumb guy gave me the old kinda fuse... and when i told him that new ones having socket type(blade) fuse, he started going through the catalogue.

neither did he find it , he even said that they are not having that kind of fuse at any SVC and i have to get it from some outside shop

damn , why are they even selling the new model here if they cant provide the exact spare parts.

P.S. just for trivandrum guys, the SVC i mentioned in the last is LOGTECH TVS.

When in distress, mail the
GM.

refer the RTR 160 thread first page for details.

Sent from my WT19i

Announcement

TVS Apache RTR 180

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment