now i can say that it really is ABOVE ALL
Announcement
Collapse
No announcement yet.
Karizma/Karizma R Ownership Experience
Collapse
X
-
I got this 300ml bottle for Rs.170 printed price 174.Originally posted by jpZMA View PostThanks friend.
btw what is the cost of waxpol tyre shine?
Can we use this on alloys also?
It is same like as waxpol dashboard polish. Same smell whitish color only it is lighter than dashboard polish
It can be also use as dashboard polish on plastic surface, works good, but sorry u cannot use on alloy.
U can use waxpol wax (scotter polish) for your alloy.| SOL 68s | Rynox Tornado Pro | Rynox Advento | Cramster TRG2 | Scoyco MC20 | Hero 5 and SJ6 |
Adjusting Tappets FZ25 www.youtube.com/watch?v=VhiJGtd_Xigl
Engine Oil & Oil Filter Change www.youtube.com/watch?v=9AZ5MlXF7dc
Visit here for more DIY www.youtube.com/c/LifeofPal
DIY - Foam Air filter Cleaning & Oiling / Horn Repair Guide / Replacing Motorcycle Fork Oil
Read This Before You Buy Any Halogen Bulb
Engine Overhaul
Comment
-
This is a bit on the higher side. Visit JC road once. You can get the same front+rear combo for 4k.Originally posted by zma10 View PostHi Divya Sharan,
Yes bro.. the tyres are 5.5k both front and rear in Bangalore.
.
.
.
Both ceat Grip and Michelin Cirac are good tyres.
Cheers,
Karthik

I got a Michelin Sirac Street rear + Ceat Gripp front for Rs3950 there a couple of months back..We are miles away from the routine.
Headlights rise over the horizon.
Pierce the morning fog.
Cut through the clutter in our minds.
Carve new highways!
Comment
-
fitting car horns on my ZMA
Thanks friend for your suggestion, I wish there shouldn't be any issue on next 1K, till my 3rd service.Originally posted by sunny_ View PostYou can wait till the next service.
thanks dear, i am going to have it in a couple of hours.Originally posted by paul.1911 View PostI got this 300ml bottle for Rs.170 printed price 174.
It is same like as waxpol dashboard polish. Same smell whitish color only it is lighter than dashboard polish
It can be also use as dashboard polish on plastic surface, works good, but sorry u cannot use on alloy.
U can use waxpol wax (scotter polish) for your alloy.
hi friends, is there any problem by fitting my dual car horns (ford figo) on my ZMA ?
I have a roots relay. Can anyone tried this earlier?
Also i wanted to know the proper mount of dual horns in ZMA.
please post some pictures.
Thanks in advance.Last edited by jpZMA; 10-19-2012, 09:57 AM.I really can't define myself without my bike
Comment
-
Which is that horn? Can you please post a pic of it? also power ratings, if mentioned in the horn.Originally posted by jpZMA View Post, is there any problem by fitting my dual car horns (ford figo) on my ZMA ?
Will depend upon the size of horns.Also i wanted to know the proper mount of dual horns in ZMA.
For windtones,Like this:please post some pictures.
Karizma Parts Manual - https://picasaweb.google.com/1010125...rizmaCatalogue
Comment
-
Yes u can fit..no problem! It will be better if u give your horn a separate direct line from battery to the relay and your relay will work from horn push switch.Originally posted by jpZMA View Posthi friends, is there any problem by fitting my dual car horns (ford figo) on my ZMA ?
I have a roots relay. Can anyone tried this earlier?| SOL 68s | Rynox Tornado Pro | Rynox Advento | Cramster TRG2 | Scoyco MC20 | Hero 5 and SJ6 |
Adjusting Tappets FZ25 www.youtube.com/watch?v=VhiJGtd_Xigl
Engine Oil & Oil Filter Change www.youtube.com/watch?v=9AZ5MlXF7dc
Visit here for more DIY www.youtube.com/c/LifeofPal
DIY - Foam Air filter Cleaning & Oiling / Horn Repair Guide / Replacing Motorcycle Fork Oil
Read This Before You Buy Any Halogen Bulb
Engine Overhaul
Comment
-
Originally posted by jpZMA View Posthi friends, is there any problem by fitting my dual car horns (ford figo) on my ZMA ?
I have a roots relay. Can anyone tried this earlier?
Also i wanted to know the proper mount of dual horns in ZMA.
please post some pictures.
Thanks in advance.Originally posted by Aneesh@4GHz View Post
Yes JP, you can..and as Aneesh bro said, if the horns are like showed in the photo, then I would suggest better NOT to fix them here as I have faced multiple issues while riding in rain. Water can easily get in and destroy the sound, suggesting you since Bhubaneswar and Kolkata are nearby cities so the climate conditions should be almost similar...PLUS the road conditions.
So better to tighten it alongwith the fairing's lower bolt. Right now, I'm at Jaipur, but I will post a pic as soon as I go back to Kolkata.
Comment
-
Here it isOriginally posted by Aneesh@4GHz View PostWhich is that horn? Can you please post a pic of it? also power ratings, if mentioned in the horn.
no power ratings are mentioned, only 12V is written. It is little oversized than the stock.
Dear, I really like the engine crawl & want the mount along with it.Originally posted by Aneesh@4GHz View PostFor windtones,Like this
I think this is not possible with the crawl. can you guide me further.
I think its a good idea, but it doesn't looks good.Originally posted by Vishakh View PostWhat about fitting them to the bolts supporting the fairing on the lower part?. Less chances of getting dirty.
BTW this was in my mind as one of my friend did this, this will be my final alternate.
Friend, i think i can't fix them like wise aneesh bro, due to the engine crawl.Originally posted by sunny_ View PostYes JP, you can..and as Aneesh bro said, if the horns are like showed in the photo, then I would suggest better NOT to fix them here as I have faced multiple issues while riding in rain. Water can easily get in and destroy the sound, suggesting you since Bhubaneswar and Kolkata are nearby cities so the climate conditions should be almost similar...PLUS the road conditions.
So better to tighten it along with the fairing's lower bolt. Right now, I'm at Jaipur, but I will post a pic as soon as I go back to Kolkata.
the horns are not wind tone type, so it doesn't matter to the climate, i think.
Anyway i am planning to fix it along with the fairing's lower bolt until I found a proper Mount
Tomorrow i will post my experience.
Can you post a proper diagram for fixing relay.Originally posted by paul.1911 View PostYes u can fit..no problem! It will be better if u give your horn a separate direct line from battery to the relay and your relay will work from horn push switch.
Thanks in advance.Last edited by jpZMA; 10-19-2012, 11:41 PM.I really can't define myself without my bike
Comment
-
Only if you're not looking at the odo meter.Originally posted by vivekarizma View Postmy zma would have been better with you atleast for the next one year. Will keep in mind though.
Last edited by SriramEfunds; 10-20-2012, 12:40 AM.RX100 1996 | Karizma 2004 | Karizma-R 2011 | RXZ 1999 | RX 135 1998 | RX 100 1993 | CBF150 2005 - 2011
2012 - Meghamalai | Kuttralam | 2011 Ooty | Munnar | 2010 Point Calimere | Horsley Hills | Yercaud
Comment
-
Hey Bro,Thanks for the info. When I checked for 19" front and 17" rear, that's the price which they've quoted. I checked it across many places and then purchased it. Tyres are good so no regrets. Have u also got Ceat grip on ur bike? And where in Bangalore do u stay? Cheers, KarthikOriginally posted by MAXzma View PostThis is a bit on the higher side. Visit JC road once. You can get the same front+rear combo for 4k.I got a Michelin Sirac Street rear + Ceat Gripp front for Rs3950 there a couple of months back..2 > 4
\m/
1994 Suzuki Shogun (Sold)
2003 HH CBZ (Sold)
1994 Bullet Std 350 (sold)
1994 Rx-100 (Sold)
2010 HH Karizma (Sold)
2012 KTM Duke 200 (Sold)
2015 Unicorn 160
Whew!
Comment
-
The Fiamm HK9 is meant for cars...The horn tone is 425 Htz and is rated at 4.25 amps....Originally posted by jpZMA View PostHere it is
[ATTACH=CONFIG]83777[/ATTACH]
no power ratings are mentioned, only 12V is written. It is little oversized than the stock.
Retain and tune the stock horn,since it is 2 amps and gives best output...if you want to add another horn,then go for either the Pulsar twin horn which is 2 amps each, or go for a single 400~425 hi tone motorcycle horn of 2 amps and tune it to give the required sound.....When Was The Last Time,You Did Something For The First Time.
Comment
-
here we go...Originally posted by jpZMA View PostCan you post a proper diagram for fixing relay.
Thanks in advance.

feel free to ask if u've any doubt.| SOL 68s | Rynox Tornado Pro | Rynox Advento | Cramster TRG2 | Scoyco MC20 | Hero 5 and SJ6 |
Adjusting Tappets FZ25 www.youtube.com/watch?v=VhiJGtd_Xigl
Engine Oil & Oil Filter Change www.youtube.com/watch?v=9AZ5MlXF7dc
Visit here for more DIY www.youtube.com/c/LifeofPal
DIY - Foam Air filter Cleaning & Oiling / Horn Repair Guide / Replacing Motorcycle Fork Oil
Read This Before You Buy Any Halogen Bulb
Engine Overhaul
Comment
-
Sir, you are right, when I tested the horn (contact with the stock horn plugs & without the relay), It didn't work properly (very low sound), so I am moving my head towards new dual horn sets, but i don't like pulsar horns. please suggest me, my budget is 500rs.Originally posted by psr View PostThe Fiamm HK9 is meant for cars...The horn tone is 425 Htz and is rated at 4.25 amps....
Retain and tune the stock horn,since it is 2 amps and gives best output...if you want to add another horn,then go for either the Pulsar twin horn which is 2 amps each, or go for a single 400~425 hi tone motorcycle horn of 2 amps and tune it to give the required sound.....
Sir, I also want to know the proper relay connection for optimum output
thanks in advance.
Sorry friend, I didn't get it (I am not experienced with these things). can you please explain me with a neat circuit diagram which contains two horns, relay, battery with two terminal mentioned & switch.Originally posted by paul.1911 View Posthere we go...

feel free to ask if u've any doubt.Last edited by jpZMA; 10-20-2012, 10:42 PM.I really can't define myself without my bike
Comment



Comment