Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Be smooth with your gear shifts.

Our Partner

Announcement

Collapse
No announcement yet.

Yamaha YZF-R15

Collapse
X
Collapse
 
  • Page of 1,377
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 320 820 1220 1270 1310 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1330 1370 1377 template Next
  • #19786
    Re: [Help] Broken bleed screw (disk calliper)

    Originally posted by kusmaker View Post
    From the snaps it dosen' t looks that the drill has snapped,(at least to me) One method is to weld a small taper bolt to the broken screw and then rotate the bolt anticlockwise by this way you can extract the screw for purchasing extractors , You can look out for Techsolute chemicals India pvt ltd., you can also get Alden products for extracting screws, the cost should be between 3 to 4000 rs for the imported ones and 2000/rs for the Indian ones.
    Cool. Thanks mate, very informative. I'll have a go with the heat method and the welding a bolt bit. Purchasing an extractor for this is probably not worth; would rather change the calliper. Anyway, thanks again.

    Comment

    • #19787
      Re: [Help] Broken bleed screw (disk calliper)

      Originally posted by spit_fire View Post
      Cool. Thanks mate, very informative. I'll have a go with the heat method and the welding a bolt bit. Purchasing an extractor for this is probably not worth; would rather change the calliper. Anyway, thanks again.
      If by any means you cannot extract the bleed screw(i hope this will not happen and you will succeed) you can look out for second hand brake caliper from any nearby junkyard, or sometimes you can get this part second hand from Asc also, by this way you will able to save money.

      Comment

      • #19788
        Re: Yamaha YZF-R15

        Has anyone tried swapping the the brake lines of duke200 to your R15 ? They cost only 400 for a pair.

        Comment

        • #19789
          Re: [Help] Broken bleed screw (disk calliper)

          Originally posted by spit_fire View Post
          Hello all,

          Last week, I accidentally broke the bleed screw off the front brake calliper (R15.v1). As the incident occurred while bleeding the brakes, the brake fluid had been continually draining out.

          After quite a search for spares, I finally got my hands on the bleed screw kit; cost about INR 88. Yamaha refused working on the calliper, and my local mechanic tried removing the jammed (bit of the) bleed screw out, but to no success. My only option right now would be to replace the calliper assembly as a whole, but costs around INR 4000 including taxes; which is a bit expensive.

          Was wondering if any members could input on how I could get the bit off the calliper. Would save me a lot of money!

          Thanks.
          You can make use of this thread from DIY section - Removing a Bolt with a Broken Head

          Hope it helps
          "As long as there's a horizon and I can see it, then I want to know what's there, mentally, physically and visually" - rtwpaul

          Comment

          • #19790
            Synthetic oil for yamaha R15

            Hi,

            i have Yamaha R15 version one which has done 19000 Kms.
            Still now I m using Yamaha lube semi synthetic oil.
            But I am considering to change to fully synthetic oil
            Motul 300V FL 15W-50 fully synthetic or Shell advance.
            I want to know about the impacts to my bike if I change to fully synthetic and which oil to choose.

            Comment

            • #19791
              Re: Synthetic oil for yamaha R15

              Originally posted by Sathyaseelan View Post
              Hi,

              i have Yamaha R15 version one which has done 19000 Kms.
              Still now I m using Yamaha lube semi synthetic oil.
              But I am considering to change to fully synthetic oil
              Motul 300V FL 15W-50 fully synthetic or Shell advance.
              I want to know about the impacts to my bike if I change to fully synthetic and which oil to choose.
              Approved and merged!
              Got a $5 head? Get a $5 helmet.
              Because everyone who passes, isn't a martyr!

              Bullet Service Guide CBR 250R Parts Manual Fz16 service manual - https://drive.google.com/file/d/0B1-...VFQmJzakk/view
              Hero Moto Corp Bikes' Parts RE STD 350 Wiring Diagram (CI) Service Manual - Classic 350/500
              ZMR parts - https://drive.google.com/file/d/0B-U...it?usp=sharing
              P200NS Spares' prices - https://docs.google.com/spreadsheet/...taGd5R2c#gid=0

              Comment

              • #19792
                Re: Synthetic oil for yamaha R15

                Originally posted by Sathyaseelan View Post
                Hi,

                i have Yamaha R15 version one which has done 19000 Kms.
                Still now I m using Yamaha lube semi synthetic oil.
                But I am considering to change to fully synthetic oil
                Motul 300V FL 15W-50 fully synthetic or Shell advance.
                I want to know about the impacts to my bike if I change to fully synthetic and which oil to choose.
                Its one of the best oils for R15 and especially for those who ride hard and this is what is told by most of the members here.
                You can go through few olders posts where matters relating to oils are discussed.
                And about the changes you can find are, smoothness is something you can find easily and I feel the vibrations too are reduced at higher rpm's.

                Sent from my A210 using Tapatalk

                Comment

                • #19793
                  Yamaha R15 engine Stalls

                  Hi,

                  I own Yamaha R15 2011 model which has done 19000 Kms.
                  I am facing a problem now.
                  Sometimes my bike engine switches off once I start it and sometimes while riding when I press the clutch and release the throttle the engine goes off.
                  There is no problem with the FI system as I changed my fuel pump one month back and got my injector cleaned from Yamaha Service station.
                  This problem is there with both hot and cold engines.
                  Otherwise my bike is fine and the pickup is also good.
                  Theres no error message or warning light when I turn on the ignition key.

                  Comment

                  • #19794
                    Re: Yamaha R15 engine Stalls

                    Originally posted by Sathyaseelan View Post
                    Hi,

                    I own Yamaha R15 2011 model which has done 19000 Kms.
                    I am facing a problem now.
                    Sometimes my bike engine switches off once I start it and sometimes while riding when I press the clutch and release the throttle the engine goes off.
                    There is no problem with the FI system as I changed my fuel pump one month back and got my injector cleaned from Yamaha Service station.
                    This problem is there with both hot and cold engines.
                    Otherwise my bike is fine and the pickup is also good.
                    Theres no error message or warning light when I turn on the ignition key.
                    Approved and merged!
                    Got a $5 head? Get a $5 helmet.
                    Because everyone who passes, isn't a martyr!

                    Bullet Service Guide CBR 250R Parts Manual Fz16 service manual - https://drive.google.com/file/d/0B1-...VFQmJzakk/view
                    Hero Moto Corp Bikes' Parts RE STD 350 Wiring Diagram (CI) Service Manual - Classic 350/500
                    ZMR parts - https://drive.google.com/file/d/0B-U...it?usp=sharing
                    P200NS Spares' prices - https://docs.google.com/spreadsheet/...taGd5R2c#gid=0

                    Comment

                    • #19795
                      Re: Yamaha YZF-R15

                      Hi sharan,
                      You can check the idle solenoid...when you Start your bike the rpm goes down once your start it.. I guess the idling was set when the engine was cold. I suggest you adjust your idling when Engine is hot and check if problem is resolved..

                      Sent from my C5302 using xBhp Connect mobile app
                      Thanks,
                      BKC
                      Present Owned
                      Swift ZDI 2015 | DUKE 390 2015 | SS125 2013 | R15 V1 2010 model from 2013 | Honda Dio 2010 model from 2013 | | Optra Magnum 2.0LT 2009 model from 2013
                      Past Owned
                      TVS XL 50 1988 to 2005 |                       Kinetic DX 1998 | Pulsar 150 DTSi 2006-2010 | R15 v1 2009 model 2011-2012 |
                      Apache RTR 180 2011-2013 |                       RX 5 Speed 2000 model 2012-2014 | Alto LX 2001 model 2013-2014 |

                      Comment

                      • #19796
                        Re: Yamaha R15 engine Stalls

                        Originally posted by Sathyaseelan View Post
                        Hi,

                        I own Yamaha R15 2011 model which has done 19000 Kms.
                        I am facing a problem now.
                        Sometimes my bike engine switches off once I start it and sometimes while riding when I press the clutch and release the throttle the engine goes off.
                        There is no problem with the FI system as I changed my fuel pump one month back and got my injector cleaned from Yamaha Service station.
                        This problem is there with both hot and cold engines.
                        Otherwise my bike is fine and the pickup is also good.
                        Theres no error message or warning light when I turn on the ignition key.

                        How old is the vehicle? And what's the idle RPM set to? Changed the spark plug anytime?

                        Comment

                        • #19797
                          Re: Yamaha R15 engine Stalls

                          1st Check your spark plug cap for the correct resistance
                          2) Check spark plug
                          3) Check your idle is correct and throttle cable has the correct play, I think it's 1mm
                          If it's still not sorted, I would suggest remove the throttle body and give it a good clean, remove the fast idle solenoid clean that and treat it to a little engine oil, if you've done that you may as well send your injector for cleaning on a specialised machine, just to be on the safe side. I had done this last week as mine was idling at 3k rpm, solved the problem.
                          Beware of Bread, don't say I didn't warn you!
                          More than 98 percent of convicted criminals are bread eaters !
                          Statistics show that more than 75 % of violent crimes are committed within 24 hours of eating bread !
                          Bread is known to be extremely addictive. Subjects deprived of bread and given only water, actually begged for bread after just two days !
                          Bread has been proven to kill. Scientists have now uncovered alarming evidence that 100% of the people who eat bread will eventually die !

                          Comment

                          • #19798
                            Re: Yamaha R15 engine Stalls

                            Originally posted by Sathyaseelan View Post
                            Hi,


                            Sometimes my bike engine switches off once I start it and sometimes while riding when I press the clutch and release the throttle the engine goes off.
                            Check for Engine kill Switch malfunction.
                            There have been number of bikes switching off due the engine kill switch conectors/wires touching the steel handle internally causing the bike to shut down.
                            ***Correct me if I am wrong :)

                            Comment

                            • #19799
                              Re: Yamaha R15 engine Stalls

                              HI GUYS HOPE EVERYONE IS ENJOYING THIER RIDES
                              RECENTLY I AM FACING A PROBLEM FINDING THE R15 V1 STOCK REAR TYRE AT KOLKATA.
                              MRF SAYS THEY HAVE STOPED MAKING THE TYRE.
                              MY FREND OWNS A MRF SHOWROOM HE IS INSISTING ON INSTALING THE V2 REAR TYRE.
                              HE SAYS HE HAS DONE IT WITH MANY V1s WITHOUT ANY ADJUSTMENT TO THE SWING ARM, CAN U GUYS PLZ HELP ME OUT.
                              CURRENTLY I M RUNNING ON A ZAPPER C 100/90 17'' , BUT IT IS NOT AT ALL SATISFYING ME ....
                              PLZ NEED HELP
                              I AM NOT CONCERNED ABOUT THE DROP IN FUEL EFFICIENCY BUT I NEED THE GRIP THE HANDELING..
                              with bigger powers comes bigger responsibilities
                              ​http://www.xbhp.com/talkies/image.ph...ine=1362689127

                              Comment

                              • #19800
                                Re: Yamaha YZF-R15

                                I changed the spark plug in last serbi

                                Sent from my HTC Desire X using Tapatalk

                                Comment

                                Previous 1 320 820 1220 1270 1310 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1330 1370 1377 template Next
                                Working...
                                X
                                © xBhp.com 2026. All rights reserved.
                                Designed by xBhp