Announcement

**ZMRMOD** · 08-01-2011, 11:26 AM

Originally posted by Rahul Rods Tewathia View Post

1. same problem wid me in my r15.

2. i haven't got one faring alenkey screw and i find it everywere but cuden't get it so thought going to yamaha service station and yo yo i got the 5 no alenkey screw from mech .
you can also get it from there in r15 there r too much alenkey screw and those are avelabile in their store too for 150 rs . but i got it free from mech .
.

Can r15 screw fit cbr????
I hav taped the 3 relays problem is connectors for which i will not open faring again bcaus more thab half screws arr screwed and jammed lol
Will try if possible

**Rahul Rods Tewathia** · 08-01-2011, 01:38 PM

Originally posted by ZMRMOD View Post

Can r15 screw fit cbr????
I hav taped the 3 relays problem is connectors for which i will not open faring again bcaus more thab half screws arr screwed and jammed lol
Will try if possible

ya it will fit in cbr just check which alenkey screw u need like which alenkey u use to open that old screw no 4 allenkay or no 5..
mine was 5 no allenkey no so i directly asked asked him yar allenkey wala screw de jis me 5 no ki allenkey lagti hai or fit bhi ho gaya..

mine faring was loose from left indicator side ..

**sudeepnbr** · 08-01-2011, 02:06 PM

This is an Indian Hyosung GT 650R's bolt getting rusted.
I'm not complaining the quality of parts on the GT, or in no way its a comparison. But just mentioning that rain/water could be the culprit for parts getting rusted.
This could be the same with CBR as well. Just be a little careful.

**xxbomb** · 08-01-2011, 02:12 PM

^cant see anything..:/

**Rahul Rods Tewathia** · 08-01-2011, 02:23 PM

Originally posted by sudeepnbr View Post

This is an Indian Hyosung GT 650R's bolt getting rusted.
I'm not complaining the quality of parts on the GT, or in no way its a comparison. But just mentioning that rain/water could be the culprit for parts getting rusted.
This could be the same with CBR as well. Just be a little careful.

yep i have seen many cbr here in this thread wid rvm rusted screws ..
and my cbr is now 2 month old and i am riding it in rain too after rainy ride its getting yellowish and then i do clean it properly and rvm screw are gud as new.
just clean it properly if u thing it will not get rust widhout cleaning then u are totaly wrong you need to clean daily other wise u will have rust issue on your bike..
on rvm screw there is some blank space arount screw were rain water gets in and there is no way for water to get out so we have to clean it wid clothe properly ..

**ansh@honda** · 08-01-2011, 03:16 PM

CBR 2000 km done

Hi guys !

Finally replaced my oil filter yesterday.

Did the first service at 930 km, could change only engine oil then.

I feel the engine has crying feeling if I twist the throttle during idling...over 5000 rpm...I dont really like that sound...the bike sounds sick...I have no idea why could that be...I think it has happend i took my bike to over 140kmph...

Could driving fast affect the engine? I drove 140 when I had done 1700 kms..

Also that tik tik noise from the front is reallly reallly annoying...whenevr i decelerate without the clutch its thr...

Aargee what is your opinion? Why do you think the engine will loose its smoothness so early?

Thanx

**pr4nav** · 08-01-2011, 03:26 PM

Still no oil filter. My bike has done 900+km. Only changed oil in the first service.

**harsha645** · 08-01-2011, 03:28 PM

Originally posted by ZMRMOD View Post

Hello
After projector bi xenon lamp
I changed the exhaust to a cheap one but it didnt last for even half an hour the sound at higer rpm after 5 goes to PAT - PAT like torn silencer . Now i think spending rs 24000 on TBR slip on silencer is only option. .
So hows sound quality . The video on youtube sounds nice but its official . Has anyone tried for exhaust change plz post pics and feedback bcaus many other are also wating to replace stock ..
l

if you are willing to wait,then you can have the tyga exhaust(its mentioned in their website that its under development) and that exhaust is vfm.you can get a full exhaust system from tyga for the amount you spend on two brothers slip-on

**Diuz** · 08-01-2011, 04:43 PM

I got my CBR at Haiku Honda Domlur too. Would suggest you to bypass the loan procedures and go for full payment on the bike to ensure a faster delivery..
Somehow I got the feeling that things moved a lot faster once 'loan' was taken out of the equation with the dealer.
How to do this? Take a personal loan of 2lakhs from any bank of your choice. Put it down for your bike.
Advantages
1) No Downpayment needed.
2)tenure of up to 4 years => more money per month to spend on petrol / long rides

3) faster processing of loan
4) no hypothecation on your bike
5) bike gets delivered faster as you jump the guys waiting to finish loan formalities(only my opinion)

Disadvantages
1) Probably higher rate of interest

I guess the only question would be -- "How badly do you want the CBR??"

Hope this helps..

Originally posted by saveus222 View Post

Hey guys, it's so great seeing all of you lucky CBR owners. I booked mine on 23 July at Haiku Honda, Bangalore.The guy said it'd take 4-5 months

I'm not sure if this is the right place to post my questions but here goes.

1) How is Haiku as a dealer/ASC
2) My slot is currently 146 - anyone know what the current number is
3) Can I switch to another dealer in Bangalore ? to get it faster
4) Does anyone have experience with a loan for this bike. ? How does it work?

Thanks again guys for your patience. Will be a fulltime member here..

BTW.,... Ive booked the Silver STD version. Thinking of switching to black

Originally posted by Nithesh View Post

I was quoted 58.5k as downpayment and 4.3k as EMI for 34 months from HDFC for STD

Originally posted by saveus222 View Post

Wow, 58k downpayment. Hmmmm... so did you go ahead with it ? I was wondering if you have a credit card if you can just swipe it and do one of those dial an emi things just for the downpayment lol

Originally posted by Nithesh View Post

Weird. HDFC told me the downpayment cant get below 58k. Btw how long is ur term?
And i still think 58k DP and 4.3k for 34months is a rip off (Anyone good at banking please correct me)
Muthoot was there too offering me 58k DP and 3.5k EMI for 36months(*but they wanted shitload of proof and documents and had more conditions than my brain could acknowledge)
But i dont get why the huge difference b/w the two (My banking knowledge is too weak lol)

Well i have 2 and a half months time to get my bike. By that time the monsoon will be over and i will be happy to have less rust accumulating on my bike and have lesser need to clean my bike everyday

So yeah im waiting to decide where im going. Good thing i have so much time.. im still keeping an eye out for That Other Brand too

.

edit: Btw if the above discussion doesnt belong here.. feel free to report the posts and direct Us to the thread.

**Janesh.J** · 08-01-2011, 06:54 PM

I got my CBR at Haiku Honda Domlur too. Would suggest you to bypass the loan procedures and go for full payment on the bike to ensure a faster delivery..

@Diuz What you are suggesting is NOT to opt for Finance scheme from dealer but go for a BANK Loan.. Correct me if i am wrong.

**n_aditya** · 08-01-2011, 06:59 PM

Originally posted by Janesh.J View Post

@Diuz What you are suggesting is NOT to opt for Finance scheme from dealer but go for a BANK Loan.. Correct me if i am wrong.

What he means is go for a personal loan from a bank and not for a vehicle/auto loan.

In both cases, the bank's are giving you money, only the interest rates and terms and conditions vary.

The finance scheme from the dealer is dished out by a bank. No dealer will put his money on the line, they tie up with banks and finance co's for this.

**aargee** · 08-01-2011, 07:51 PM

Originally posted by sudeepnbr View Post

This is an Indian Hyosung...Just be a little careful.

Brilliant Sudeep; very brilliant

I'd always had this doubt that, Indian weather, especially the coastals require some proper treatment on metals.