Re: Pulsar 200 NS


Where can I find those kind of pulsar named rim tapes. Those look gorgeous.

Re: Pulsar 200 NS

In my case idle rpm is 1500 when cold and sometimes it jumps to 2.5-3 k when engine is too hot ( after 2 hours of highway ride with speed burts of 80-90 km/h) Is it normal ? I adjusted the rpm once, should i do it again ?
My rear disc break is also making a pu-pu pu pu noise, sound is low and only a particular portion of disc is making this noise. When i am rotating rear wheel clockwise (no noise anticlockwise) only then the noise is audible at a particular portion, putting some water removes the noise completely. Disc never gets hot after long or short ride. Is there is any way to rectify it, its really annoying at low speeds ?

Re: Pulsar 200 NS


Idle rpm for cold seems ok, but the hot idle rpm seems a bit too high. You can get it adjusted to 2k rpm from the service center.

Cheers
Ride Safe
Krishna

Re: Pulsar 200 NS

1. remove the pillion seat.
2.remove the main seat with 8/10 tool.
3.remove the right panel using the 4 edged screw driver, there are 2 screws, after removing the 2 screws hold the roght panel firmly and pull it outwards, (theres one part which sticks in a rubber hole or whatever u call it)
4.use a long screw driver to turn the golden screw left for rich and right for lean mixture)

Done!!!

Sent from my GT-I9300 using xBhp Connect mobile app

Re: Pulsar 200 NS

When did that happened. .? It used to be take a long screw and done
Guys had a accident today when a girl tried to be pt usha on road ,I'm so angry I can't tell you ,in the middle of ITO ,she jumped to cross road where vehicle's normal speed is 65+ ,I'm so annoyed ,there was a zebra crossing along with red light 50 m ahead ,but no by%%Ch had to play the game of life is not imp. ,time is
,I braked hard( she just stood there like she was watching some stunt show) but alas hit her at 15kmph, she had a minor push but I got ass kicked and slipped on right side ,surprisingly both leg guards got bend( not cracked) but they saved my legs ,also HELMET IS GOD ,if it wasn't for a good isi market helmet ,I would be dead right now( My head striked concrete very hard)
Scratch on right hand side red colour upon headlight and I think front fork or something got disbalnaced a little bit as my bike felt a wired to ride, also when I hit ground ,something liquid came out of engine area ,although my mech says it was petrol ,but still asking for suggestions
My stars weren't great today ,I always ride with gloves but mother of God ,today was my bad day ,my two fingers of right hand got damaged (skin only but hurts like hell) why the hell I left gloves today , my left shoulder is didifficult to operate ( pain when moving) is this a dislocated shoulder ..? Is this a big problem. .? Will visit doc tomorrow, this was my first accident and my ns' s first too
Damages
Both leg guards ( thanks to creator) got bent ,repairable but advise me should I get them right or should I go for new ( no money prob but wanna spend on right things )
The right hand side pulsar logos word L and s got cracked ,but overall it's fine
A 2 inch long scratch on R.H.S. red paint on headlight assembly..
guys do tell me what should I get checked ...?
Also I'm on 1900 kms, I was thinking to have 2 ND service at 2500 kms, but now will it be good to go for service right now ...?
Bad day but my baba hanuman ji saved me
Jai shree ram.
Someone pls provide road sense to Indians
Gears are more valuable than money you spent ,as in the end they will save you ,not Money.

send from my LG nexus 5 using xbhp connect mobile app

Re: Pulsar 200 NS

Did u read his query? He says he cant do it right from the outside and hence i am telling him the easy-reach method.
Sent from my GT-I9300 using xBhp Connect mobile app

Re: Pulsar 200 NS

[MENTION=7815]anuj[/MENTION] I aint making judgments man, but in city anything above 50 is bad, and precisely for this reason,even if you dont make any mistakes, the road ia full of idiots

Sent from my GT-I9300 using xBhp Connect mobile app

Re: Pulsar 200 NS

You can find them at any Sticker shops

Re: Pulsar 200 NS

Guys, any remedy to rear disc noise ?

Re: Pulsar 200 NS

zZZ.. sorry to hear that man. fegs always troubling us on roads. get well soon.
leg guards cost like 80 bucks, get new ones.

Re: Pulsar 200 NS

Sir it was ITO bridge( you should've heard about it ,I think) it wasn't a city and it has no shops ,or roads or anything other than the bridge itself ,so 65 is fair speed and if I had driven more slowly ,someone woudve been bumped me from rear ,but thanks for your concern ,I know your intentions are for my safety
I will ,was just asking to get opinions of fellow xbhpians.
Also my bike is perfect in.every sense ,power ,mileage,no vibes ,smooth and noise free ,but with recent cases of accidents with ns, I'm highly scared it may become a dull one
I think I will not be able to ride( feeling soulless) for at least a week ,at present my bike just stands with damages ,I will visit svc maybe on Friday or upcoming Wednesday ,cuz I always have my ns serviced alone and with me standing 10 cm away from it fir the whole 3 hours,guess my ns remains the same powerhouse as it was earlier ( this is the most concerning and depressing thing I'm going with ,not my wounds ,not pain)
send from my LG nexus 5 using xbhp connect mobile app

Re: Pulsar 200 NS

My nephew (who has orederd me to give him my ns after 12 years hehehe)
My twin gf' s ( before accident with ns)

send from my LG nexus 5 using xbhp connect mobile app

Re: Pulsar 200 NS

Took it to the svc for the fourth time today to rectify the disk problem, Rear disk heating up like an owen and front disk squeaking sound is really annoying. This time I said that I will only take delivery if the problem is rectified properly
Also guys my brake fluid got empty. I'm at 3100km on odo. Is this normal? How much does it last normally?

Re: Pulsar 200 NS

Your disc pads are touching disc without engagement, this means your disc will worn out,and you will be getting low mileage ,tell them to check whether disc is bent...? Ask them to rub disc pads with sand paper ,my mech. Said brake oil goes good up to 16000kms

send from my LG nexus 5 using xbhp connect mobile app

Re: Pulsar 200 NS

In my case there is no heating problem or squeaking noise but only a particular portion of disk is rubbing against caliper and it is making a pu pu kind of noise which fades as the bike speeds up. Also both disc make a very low khas khas noise which i noticed on observing carefully in silent environment. Is it normal for disk brakes ? Lastly bike is a monster and i am loving it....i will post a short review soon.