Announcement

**KennyKL01** · 12-25-2013, 01:51 AM

Re: Pulsar 200 NS

Originally posted by broken87 View Post

@Anuj_Gupta
welcome back to the forum dude.

go for it ! you'd probably be first on xBhp to grab the black and red color scheme. What other bikes you were considering before going for NS ?
@Rahulbarik
Yo I found a petronas syntium dealer here in Delhi. May be I will try it out as you said it's better for 200NS than Motul 7100. Could you give us another feedback on how well the oil has worked for your NS till now ? You still running on Petronas or back to Motul ? Any issues with it ?

To b honest I was aiming for RE 500but due to the budget issue and this freaking waiting period I had t change the plan. I have one one more question. Factory condition this machine is not coming with central stand, for me to ship it from Trivandrum - Bengaluru by bus central stand is required. So I'm planning to go for a central stand too. I also would like to remove the wheel hugger. What do you say?

**broken87** · 12-25-2013, 08:20 PM

Re: Pulsar 200 NS

Merry Xmas, today Santa gifted me the skill to do wheelies on 200NS.. finally cracked it and got the front wheel way up and going. xD what a silly achievement :P feels good though.

**Newrider88** · 12-25-2013, 11:36 PM

Re: Pulsar 200 NS

Guys, what is the solution to rear disc noise ?? Will replacement of disc pad help ?

**Anuj_Gupta** · 12-26-2013, 12:15 AM

Re: Pulsar 200 NS

Originally posted by Newrider88 View Post

Guys, what is the solution to rear disc noise ?? Will replacement of disc pad help ?

Don't let water touch rear disc assembly. .use hard rear braking for some days
Have your pads rubbed by sand paper
IT WILL GO AWAY
if not then your bike rear disc is a Shaktimaan piece

Sent from my LG-P765 using xBhp Connect mobile app

**DDsouza** · 12-26-2013, 01:32 AM

Re: Pulsar 200 NS

15k kms completed and bike is kickass! Console vibs are killing me

Sent from my GT-N7100 using xBhp Connect mobile app

**DDsouza** · 12-26-2013, 01:34 AM

Re: Pulsar 200 NS

I have almost changed all possible wear and tear part's at 15k stage! Incredible machine hope to.fix the console juggad soon!

Sent from my GT-N7100 using xBhp Connect mobile app

**Cleaner** · 12-26-2013, 09:49 AM

Re: Pulsar 200 NS

Originally posted by DDsouza View Post

I have almost changed all possible wear and tear part's at 15k stage! Incredible machine hope to.fix the console juggad soon!

Be sure to take pictures of the procedure in order to help others. If you need any torque values, shoot me a PM.

**DDsouza** · 12-26-2013, 10:05 AM

Re: Pulsar 200 NS

Haven't got any pictures mate. I could send you a pic of the old spark plugs which lasted for 14k kms. It started showing signs of ageing when I started getting small lags at 4k rpm and the bike would struggle to go 130, would clock 126 with all ease after that it struggled alot.

Sent from my GT-N7100 using xBhp Connect mobile app

**DDsouza** · 12-26-2013, 10:09 AM

Re: Pulsar 200 NS

I need help in the console vibrations, with increase within 500kms. The higher the rpm the faster it lossens up! The DIY by aditya hasn't work with my bike

at times I feel like removing the headlamp assembly. Lol

Sent from my GT-N7100 using xBhp Connect mobile app

**bondarun** · 12-26-2013, 11:03 AM

Re: Pulsar 200 NS

Originally posted by DDsouza View Post

I need help in the console vibrations, with increase within 500kms. The higher the rpm the faster it lossens up! The DIY by aditya hasn't work with my bike

at times I feel like removing the headlamp assembly. Lol

Sent from my GT-N7100 using xBhp Connect mobile app

Just remove the headlight assembly part by part and assemble them back by adding double sided sticker to contact points...

Just examine the Assembly and you could find many parts rubbing one another... Just ADD a small piece of double sided tape...

Mine gone totally, now only vibs are in Tank... will figure a way to isolate them when get Proper tools to open it up...

Here is a pic of it...
Have added few in between the console and also on side...

**Newrider88** · 12-26-2013, 01:57 PM

Re: Pulsar 200 NS

Originally posted by Anuj_Gupta View Post

Don't let water touch rear disc assembly. .use hard rear braking for some days
Have your pads rubbed by sand paper
IT WILL GO AWAY
if not then your bike rear disc is a Shaktimaan piece

Sent from my LG-P765 using xBhp Connect mobile app

I seldom use rear brakes and when ever i do it makes a horrible noise, actually a specific part of disc is touching the caliper so if that particular part comes in contact during braking then it makes a disgusting noise

. I will try rubbing the disc pad with sand paper.

**broken87** · 12-26-2013, 04:20 PM

Re: Pulsar 200 NS

Originally posted by DDsouza View Post

I have almost changed all possible wear and tear part's at 15k stage! Incredible machine hope to.fix the console juggad soon!

Sent from my GT-N7100 using xBhp Connect mobile app

which wear and tear parts ? could you pls name them. chain sprocket, tyres etc ?

**Rex2688** · 12-26-2013, 05:43 PM

Re: Pulsar 200 NS

Originally posted by bondarun View Post

Just remove the headlight assembly part by part and assemble them back by adding double sided sticker to contact points...

Just examine the Assembly and you could find many parts rubbing one another... Just ADD a small piece of double sided tape...

Mine gone totally, now only vibs are in Tank... will figure a way to isolate them when get Proper tools to open it up...

Here is a pic of it...
Have added few in between the console and also on side...

[ATTACH=CONFIG]129291[/ATTACH]

thanks for the pic

**pgaucha** · 12-26-2013, 09:56 PM

Re: Pulsar 200 NS

What is the battery that is being used for our 200 NS ? Recently my battery got drained and recharged .there is frequent drain out so planning to change it. Any suitable replacement available in amaron or any other product recommend?

Sent from my Nexus 7 using xBhp Connect mobile app

**princesirohi** · 12-27-2013, 12:39 AM

Re: Pulsar 200 NS

Originally posted by pgaucha View Post

What is the battery that is being used for our 200 NS ? Recently my battery got drained and recharged .there is frequent drain out so planning to change it. Any suitable replacement available in amaron or any other product recommend?Sent from my Nexus 7 using xBhp Connect mobile app

It is a VRLA battery, yes amaron has its replacement.

Announcement

Pulsar 200 NS Owners Review and Experiences

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment