Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Castrol Power 1

Dawn & dusk make slight hard to adjust.

Our Partner

Announcement

Collapse
No announcement yet.

TVS Apache RTR 180

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: "Kat...kat..."Noise from my RTR 180 only while accelerating

    Originally posted by swift View Post
    Recently my bike is producing some strange noise from drive chain area, something like kat..kat... initially for few secs ONLY WHEN I ACCELERATE

    1) I thought this sound might be due to dry chain. Tried lubricating the chain but no help.
    2) This noise comes up only when i accelerate. I confirmed this by riding in downhill. No sound when not accelerated.
    The moment i turn up the accelerator this sound shows up for first few secs (hmmm....may be after that too but i'm not hearing anything post that due to wind noise at speeds above that).

    Anyone faced this issue? What it could be?
    How much kms has the chain kit run bro? Coz I've seen many bikes with worn front/rear sprocket making the same noise when accelerating the bike.

    Comment


    • Re: "Kat...kat..."Noise from my RTR 180 only while accelerating

      Originally posted by John P Daniel View Post
      How much kms has the chain kit run bro? Coz I've seen many bikes with worn front/rear sprocket making the same noise when accelerating the bike.
      8100KM - 3 years old bike
      Honda Activa (2011)
      TVS Apache RTR 180 (2013)
      TVS Victor GLX(2004-2013)

      Comment


      • Re: "Kat...kat..."Noise from my RTR 180 only while accelerating

        Originally posted by swift View Post
        8100KM - 3 years old bike
        Yep. Faced the same. Over and over. Check your chain for malformed links. I had a broken link while riding once. Was a miracle nothing happened to me.

        Comment


        • Re: TVS Apache RTR 180

          Originally posted by Abishek94 View Post
          Is the 15T front sprocket of pulsar a direct fit? If not then what are the changes that need to be done?
          And can you please tell me the speed at 4krpm and 7k rpm?
          It was not a direct fit.But if you have those clips of pulsar ug3 15t,then you can fit it.I searched a lot for those clips but could not find them.Then my mechanic managed to mod the clips of CT100 which was lying around and fitted it.(By clips I meant those small thing you use to fit front sprocket)
          I have to check the exact speeds.On 5th gear I suppose?And the speeds wont be accurate cause I am using a low profile tyre.
          "Vibes transmitted from crank shaft to frame, then through the bearings of the head stock and into the stem where it meets the triple clamp and into the clip-ons where it is greeted with great pleasure by my hands"-ratfighter mod rtr

          Comment


          • Re: "Kat...kat..."Noise from my RTR 180 only while accelerating

            Originally posted by evyavan View Post
            Yep. Faced the same. Over and over. Check your chain for malformed links. I had a broken link while riding once. Was a miracle nothing happened to me.
            Thanks mate.
            I will check for any damaged chain link.
            Normally how much is the life of a chain?
            Honda Activa (2011)
            TVS Apache RTR 180 (2013)
            TVS Victor GLX(2004-2013)

            Comment


            • Re: "Kat...kat..."Noise from my RTR 180 only while accelerating

              Originally posted by swift View Post
              Thanks mate.
              I will check for any damaged chain link.
              Normally how much is the life of a chain?
              For open chain, normal life would be around 20k-30k with average maintenance and usage. Closed chain would be around 40k-50k under similair conditions.

              Comment


              • Re: TVS Apache RTR 180

                GUYS,

                My bike got skitted yesterday, the bike slide on the left side and i fell down, from that moment, i am having issues while lowering the gears. My gear pedal is hitting the side stand, and i cannot apply the gears properly. what could be the issue, has any one faced such issue.

                ----consecutive posts auto-merged-----

                My bike got skidded yesterday, the bike slide on the left side and i fell down, from that moment, i am having issues while lowering the gears. My gear pedal is hitting the side stand, and i cannot apply the gears properly. what could be the issue, has any one faced such issue.

                Comment


                • Re: TVS Apache RTR 180

                  Originally posted by hemnath View Post
                  GUYS,

                  My bike got skitted yesterday, the bike slide on the left side and i fell down, from that moment, i am having issues while lowering the gears. My gear pedal is hitting the side stand, and i cannot apply the gears properly. what could be the issue, has any one faced such issue.

                  ----consecutive posts auto-merged-----

                  My bike got skidded yesterday, the bike slide on the left side and i fell down, from that moment, i am having issues while lowering the gears. My gear pedal is hitting the side stand, and i cannot apply the gears properly. what could be the issue, has any one faced such issue.

                  Hey, hope you din sustain major injuries? Take care
                  The gear shifter may have gotten bent during the fall.. You might have to change it if its bent. Get it checked at svc.

                  Comment


                  • Re: TVS Apache RTR 180

                    Hey guys, hope all are doing well. Can someone pls help me out, for a good mobile holder for my rtr? Some of them I have tried from my friends but they do not fit the clip on handlebars of the rtr. I am thinking about going for short trips on my bike.

                    Thanks in advance.
                    Never ride faster than your guardian angel can fly. ~Author Unknown

                    Comment


                    • Re: TVS Apache RTR 180

                      Originally posted by Abishek94 View Post
                      Hey, hope you din sustain major injuries? Take care
                      The gear shifter may have gotten bent during the fall.. You might have to change it if its bent. Get it checked at svc.
                      Gear lever is not bent, the side stand became close to the gear lever and even the side stand is not bent. I have checked with other apache.
                      Last edited by hemnath; 01-18-2016, 09:51 PM.

                      Comment


                      • Re: TVS Apache RTR 180

                        Guys today i went to get my rtr180 from svc and guess what.. I saw the RTR200 on demo camouflage. And also got a confirmation that the beast is going to be launched by February 18th it seems.. Now I am thinking about exchanging my 180 for the 200..
                        Last edited by kavb1986; 01-18-2016, 11:04 PM.

                        Comment


                        • Re: TVS Apache RTR 180

                          Originally posted by andy0104 View Post
                          Can someone pls help me out, for a good mobile holder for my rtr? Some of them I have tried from my friends but they do not fit the clip on handlebars of the rtr..
                          Hey andy. Try the rynox mobile phone holder. Attaching a mobile holder on our handlebars is a hard job as we have clipons & hardly 2 inches of the handlebar is open for fitment.
                          TVS Apache RTR 180 (2014 - ….)

                          Comment


                          • Re: TVS Apache RTR 180

                            Originally posted by Mr_Many_Places View Post
                            Hey andy. Try the rynox mobile phone holder. Attaching a mobile holder on our handlebars is a hard job as we have clipons & hardly 2 inches of the handlebar is open for fitment.
                            Thanks bro
                            I have tried that as well, but unfortunately it does not fit clip on handlebars on our bikes. Its useful for long handlebars only.
                            Never ride faster than your guardian angel can fly. ~Author Unknown

                            Comment


                            • Re: TVS Apache RTR 180

                              Apache 200 4V..
                              The upcoming TVS Apache 200 has now been fully revealed in new images. Launch of the upcoming TVS Apache is scheduled to take place on 20th Jan.

                              Comment


                              • Re: Facing the hiccups Issue

                                Originally posted by pulsarized View Post
                                Hi All. Forgive me for the long post. I am facing an issue with my 3 month old rtr 180 abs version. I ve gone through this forum. Please dont be rude that Ive not done it. I am not sure about what I should do now.Detailing the issue below.

                                Visit 1
                                to Service Centre - For second Service

                                No Issues as of now. Had just gone to get the scheduled service done at around 2.5kms at At 2500km i had given for second service, at the ramkay tvs medavakkam .Service done and bike was delivered.
                                On returning, I started facing the famous hiccup and stall issue on my rtr 180 .he bike has hiccups near about 3-4k rpm in 3rd and 4th gears. Also in lower gears with sudden increase in throttle.
                                I had no such issues until my 2nd service. SVC has screwed up something.
                                Visit 2 :
                                The bike had hiccups while riding. I went and detailed the issue to an engineer and he took the bike for a spin and said that there are no issues and they wont touch the carb during service , unless complained.
                                Visit 3:
                                In a weeks time the hiccups increased and at the end it didnt even start in the mornings. So i had the bike taken to the service station in a carrier vehicle and they said there is dust in the carb. It has been cleaned and the issue wont occur.
                                Visit 4:
                                On the very next day i was able to feel the issue again. When i took it to service centre the issue was not occcuring for some reason. So the guys asked me to come only when i could show the issue to them.

                                I am worried about this state of my 3 month old bike. Should i tune the carb myself following the online instructions.
                                My current carb tune done by the svc guys is 1.5 turns from the leanest possible mixture. Is 1.5 turns normal or too lean.

                                Is there any factory number of turns or revolutions of the fuel screw like 2 or 3 for the rtr 180?

                                Or should i hunt for some other service center. Help Please

                                My issue has been resolved. I took the bike to another service centre where 2 mechanics took my bike for a ride and came to a conclusion. They pointed out that the issue was with the xt cable (or ht , I m not sure what it was) which had been tampered with. They said that it was slightly cut. It could have occured due to the guys in the previous service centre.
                                They have replaced something called flood cap.Charged me 200 INR for the same. It is the part on top of the spark plug. They ve taped it.

                                They told me that if the issue occurs again they would have to replace the entire xt cable with coil and that could be done under warranty.
                                Ive tested the bike for a week now and I dont see that issue anymore.

                                Thanks guys prateek2210 ,RohIIT ,sun105 ,John P Daniel for your inputs. Highly appreciated.
                                Let the Man And The Machine Unite!

                                Comment

                                Working...
                                X