
Heart-broken

KRP just makes exhaust for RTR....says the demand is for other commuting Indian manufacture bike......
This calls for old-monk tonight
Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us


But i would say stick to tube type tyre, why change and lose peace of mind?? In case fixing a puncture is your concern then use a tyre sealant along with the tubes. The sealant is sprayed to the valve of the tube and then inflated. Whenever there is a puncture, the sealant immediately seals the hole thus fixing the puncture automatically
(You should be able to find this in JC road)
Thanks for the info...


I got the fork fluid and brake pads replaced. They did a decent job on the fork fluid. But ever since they changed the brake pads, the acceleration has gone down a bit as the front wheel is not rotating freely. Also, the brake's bite has gone down. The mech said that the pads are rubbing against the surface as they are new and it should be okay after a 100km. He is BSing me right?
I got the fork fluid and brake pads replaced. They did a decent job on the fork fluid. But ever since they changed the brake pads, the acceleration has gone down a bit as the front wheel is not rotating freely. Also, the brake's bite has gone down. The mech said that the pads are rubbing against the surface as they are new and it should be okay after a 100km. He is BSing me right?
I remember my front wheel was way too tight when I got the new pads, which became free in sometime. So chill, nothing to worry.
I remember my front wheel was way too tight when I got the new pads, which became free in sometime. So chill, nothing to worry.


Comment