Announcement

**Praful** · 02-06-2011, 10:27 AM

Originally posted by truelypulsarian View Post

I think the mechanic is also not sure about it

so does it harms the engine ??? is it compulsary to replace it??? the mechanic is not giving a clear idea to me regarding this iam very confused

.

from the past 3k kms iam driving my bike very insane

so is that the reason of broken down that part??

Very Insane driving eh?

Yes that is in all probability the cause.

Well the gears are held in place by 4-5 of these, if one breaks its increases the stress on the others as instead of 5 now 4 are doing the work. So like I said before if you ride sanely you can still continue to ride, but if another breaks then that can cause damage to the gearbox as well. So change it as soon as possible.

**truelypulsarian** · 02-06-2011, 03:02 PM

Originally posted by Praful View Post

Very Insane driving eh?

Yes that is in all probability the cause.

Well the gears are held in place by 4-5 of these, if one breaks its increases the stress on the others as instead of 5 now 4 are doing the work. So like I said before if you ride sanely you can still continue to ride, but if another breaks then that can cause damage to the gearbox as well. So change it as soon as possible.

Thankz for ur suggestion bro

so did u changed??? if so whats the total cost to change it????

**Praful** · 02-06-2011, 04:27 PM

I have changed it. But the cost will be different for me as I had done a lot of different things at that time. My total bill was 4K!

**truelypulsarian** · 02-06-2011, 07:46 PM

Originally posted by Praful View Post

I have changed it. But the cost will be different for me as I had done a lot of different things at that time. My total bill was 4K!

For changing that part is it neccesary to open the full engine???

because the mechanic told like that.

**manohar_manu** · 02-06-2011, 07:52 PM

Originally posted by truelypulsarian View Post

For changing that part is it neccesary to open the full engine???

because the mechanic told like that.

if i'm correct, they will open only crankcase to change. not a big deal.

**Praful** · 02-07-2011, 10:51 AM

Originally posted by truelypulsarian View Post

For changing that part is it neccesary to open the full engine???

because the mechanic told like that.

Like Manu mentioned, only the crankcase will dis-assembled!

**a.jayamohan** · 02-07-2011, 02:09 PM

Originally posted by truelypulsarian View Post

For changing that part is it neccesary to open the full engine???

because the mechanic told like that.

Dont worry brohter...Me too opened my engine to replace the crank under warranty. and the fuel pump without warranty...No issues after that

I dont know what will we do after 5 years

. In your case no need to dismantle the engine.

**truelypulsarian** · 02-07-2011, 02:48 PM

PBK people estimated the amount around 3k

. and is it compulsary to change the engine oil??? because they are telling that i have to change the engine oil compulsary iam also experincing gear slipping problem so planning to change it shortly.

**a.jayamohan** · 02-11-2011, 07:51 AM

Originally posted by truelypulsarian View Post

PBK people estimated the amount around 3k

. and is it compulsary to change the engine oil??? because they are telling that i have to change the engine oil compulsary iam also experincing gear slipping problem so planning to change it shortly.

In my view it is better to change oil after any engine work.are you using motul?

**nitrosatya** · 02-11-2011, 11:17 AM

I stopped checking this thread a long time ago. Didn't want any tension.

My bike's 4th gear is slipping now.Clutch problem maybe? And the average has dropped considerably.

**Praful** · 02-11-2011, 11:34 AM

Originally posted by truelypulsarian View Post

PBK people estimated the amount around 3k

. and is it compulsary to change the engine oil??? because they are telling that i have to change the engine oil compulsary iam also experincing gear slipping problem so planning to change it shortly.

3K seems like an decent estimate. The parts aren't that expensive, labour charges for this job would be high!

And yes you definitely have to change your engine oil, something inside your gearbox broke. There maybe other smaller mettalic parts floating around.

Originally posted by nitrosatya View Post

I stopped checking this thread a long time ago. Didn't want any tension.

My bike's 4th gear is slipping now.Clutch problem maybe? And the average has dropped considerably.

Thread or no thread... I don't think there is any reason to take any tension!

4th is slipping as in is it shifting to 5th or 3rd? Or you cannot engage 4th at all.

When was your clutch plate replaced last?

**nitrosatya** · 02-11-2011, 01:17 PM

Originally posted by Praful View Post

Thread or no thread... I don't think there is any reason to take any tension!

4th is slipping as in is it shifting to 5th or 3rd? Or you cannot engage 4th at all.

When was your clutch plate replaced last?

4th gear sometimes slips to 3rd with a loud vroom.
I don't remember when was the clutch plate replaced. Maybe more than a year ago. It was standing still for 6 months when i was out of India.

**truelypulsarian** · 02-11-2011, 01:22 PM

PRAFUL:- thankz dude.

Hey iam currently running on bajaj dtsi oil satisfied with it so thinking to switch over bajaj oil from now & quitting out from expensive 300v so any problem to the engine by suddenly shifting from fully synthetic oil to bajaj dtsi oil??

to my surprise after chaging the clutch plates the bike is feeling very new

i mean the engine smoothness is back and the bike is not vibrating at all like previous & also the engine note bacame very smooth like zma

.

**Ivin** · 02-11-2011, 10:04 PM

Guys, do you know if there is a problem using cars k&n air filter in bikes?? I want to try it.. Thats why.... My friend in Trivandrum has tried it and he can go 150kmph in no time....
I will post the pics of that filter later... His bike is P220 DTS-Fi.. He has been using it for the past 6 months... Will it cause any trouble..? I'm already using an R1100 in my bike,,, I would really like to boost my performance.. Any thought on this will be appreciated.... Thank you...

**a.jayamohan** · 02-12-2011, 10:05 AM

Originally posted by Ivin View Post

Guys, do you know if there is a problem using cars k&n air filter in bikes?? I want to try it.. Thats why.... My friend in Trivandrum has tried it and he can go 150kmph in no time....
I will post the pics of that filter later... His bike is P220 DTS-Fi.. He has been using it for the past 6 months... Will it cause any trouble..? I'm already using an R1100 in my bike,,, I would really like to boost my performance.. Any thought on this will be appreciated.... Thank you...

P220dtsfi perform well only if the air_fuel mixture in a specific air_fuel ratio. Entering too much air in the combust chamber won't do any improvement in the top end. it is related to other factors like gear ratio,design of the bike etc....yeah..acceleration feels better,nice sound and you will see 150 kmph often but check radar test and find the truth

The same R1100 is using my bike too.

Announcement

Pulsar 220 DTS-Fi

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment