I changed the tail lamp bulb of my bike yesterday as the brake light filament had fused, while the tail light filament was working fine.
Picked the bulb from a local auto spare parts shop, & it cost me INR 10. The recommended rating is 12V-21W/5W, but I got 12V-21W/6W.
Procedure
To remove the bulb, one needs to remove the seat, & turn the bulb holder anti-clockwise from inside the tail section. This is the easy bit.
Then replace the fused bulb with a new one.
To fix the the holder back in position, one needs to put the holder back in the socket (aligning the grooves) & turn it clockwise. This was the tricky bit for me & I finally managed to do it after almost 10 mins of attempting it.
You need small palms to do this job well & quick.
PS:
1. The stock bulb lasted me 20k Kms, & 21 months (This is just to provide an idea. I realise its an electrical component that can go kaput at any time or even last for eternity).
2. The procedure for tail lamp bulb replacement isn't there in the Service Manual, where I first checked it!! It is there ONLY in the Owner's Manual.


we have taken the lead more than 220 also.


and the attention! Everyone on the road seemed to have only eyes for this gleaming Red Beauty! And it felt HUGE with the full fairing and wide mirrors! I was elated at how at ease I felt on my machine although it was the first ride, and that too in Bangalore's crazy rush-hour traffic. My parents, who thought I was totally bat-shit crazy when i told them i was changing bikes, were totally spellbound by the bike and my dad even said "Youngsters today are so lucky to have access to such beautiful machinery".
I found it too funny.. 


Comment