Announcement

**spknair** · 04-25-2013, 02:41 PM

Re: Pulsar 200 NS

Originally posted by Aditya N Bharadwaj View Post

Btw, good to see some optimism from your side regarding your bike. I'm referring to your previous post in which you mentioned how good your bike is.

Dear Aditya, I have to... Right?

I got angry by our forum members itself who says NS is the "best"
many of them are blind about their bike
In my opinion, our NS is a cost effective power machine. Nothing more.

Originally posted by Aditya N Bharadwaj View Post

Castrol Power1 is very good indeed, provided you find the original. The problem is, the market's flooded with fake castrol products, using which might screw up the engine and burn a hole in the pocket. It's pretty hard to differentiate between original and fake too. But the dealer I went to is a trusted one. I used the oil for 4k kms and I found it to work at par with the 5100 I used before it. Can't comment on 7100 as I haven't used it. I use 300V now.

I was not aware about that

I mean the fake engine oil products. Thanks for the insight..

Dear NSians,

Have you ever noticed our thread viewership details ??????
average post per day...
&
average views per day...

Pulsar 200NS ROCKS !!!!!!!!
Pulsar 200NS ROCKS !!!!!!!!
Pulsar 200NS ROCKS !!!!!!!!
Pulsar 200NS ROCKS !!!!!!!!
Pulsar 200NS ROCKS !!!!!!!!
Pulsar 200NS ROCKS !!!!!!!!
Pulsar 200NS ROCKS !!!!!!!!

**niteshneela** · 04-25-2013, 04:54 PM

Re: Pulsar 200 NS

In my opinion, our NS is a cost effective power machine. Nothing more.

truly said

if ktm duke 200 was also priced at 1 lakh i bet many of them would hav got that xD

**Rajesh Javvadi** · 04-25-2013, 05:28 PM

Re: Pulsar 200 NS

Originally posted by niteshneela View Post

In my opinion, our NS is a cost effective power machine. Nothing more.

truly said

if ktm duke 200 was also priced at 1 lakh i bet many of them would hav got that xD

If fuel injection is present in the NS it would be considered as premium bike and the cost also would increase by 8-10k

----consecutive posts auto-merged-----

Bloody my "Pulsar" sticker already started to peel off. Can we get the Pulsar stickers again from service center people or can we have the metal "Pulsar" plate like pulsar 150 has?

**spknair** · 04-25-2013, 05:47 PM

Re: Pulsar 200 NS

Originally posted by Rajesh Javvadi View Post

Bloody my "Pulsar" sticker already started to peel off. Can we get the Pulsar stickers again from service center people or can we have the metal "Pulsar" plate like pulsar 150 has?

me too

**khunti** · 04-25-2013, 08:56 PM

Re: Pulsar 200 NS

well it seems that people are having their pulsar logos peeled off by itself.as for me the logo has got cracked in a few places after only 7 months.well really feel bad about it and the quality itself.i do think that having the logo in metal would have been a great but if we consider the fuel tank which is made of plastic our answers are self explanatory.so i think to each his own.

**niteshneela** · 04-26-2013, 10:29 AM

Re: Pulsar 200 NS

its a hard time finding yellow helmet for my mustard yellow pulsar 200ns

what d u ppl use ?

**Horror** · 04-26-2013, 11:57 AM

Re: Pulsar 200 NS

WordPress › Error

http://www.spartanprogear.com/HelmetDetails.aspx?mc=1&na=true&id=134

I use the new one by SOL : A bit heavy on the pocket, but worth every penny

WordPress › Error

http://www.spartanprogear.com/HelmetDetails.aspx?Id=180&mc=1&typ=15&status=none

Don't mean to go off topic

----consecutive posts auto-merged-----

**niteshneela** · 04-26-2013, 12:32 PM

Re: Pulsar 200 NS

Originally posted by Horror View Post

Spartan Pro Gear
I use the new one by SOL : A bit heavy on the pocket, but worth every penny

Spartan Pro Gear
Don't mean to go off topic

----consecutive posts auto-merged-----

i also zeroed to them itself .. but are they really mustard yellow or light yellow

**Rajesh Javvadi** · 04-26-2013, 01:34 PM

Re: Pulsar 200 NS

Originally posted by khunti View Post

well it seems that people are having their pulsar logos peeled off by itself.as for me the logo has got cracked in a few places after only 7 months.well really feel bad about it and the quality itself.i do think that having the logo in metal would have been a great but if we consider the fuel tank which is made of plastic our answers are self explanatory.so i think to each his own.

Atleast can we get the stickers again? The bike doesn't look good without the logo in my opinion.

**niteshneela** · 04-26-2013, 02:02 PM

Re: Pulsar 200 NS

had my 3rd servicing done 2 days back .. the bike is jerking very much since the servicing is done .. today i visited the svc and technician had a test drive .. he was sure that the fuel isnt getting properly to the card and that is what is causing the jerks ... he told to leave the bike der and collect it 2mrw evng .. is this a big issue ? is my bumblebee safe ?

----consecutive posts auto-merged-----

Originally posted by Rajesh Javvadi View Post

Atleast can we get the stickers again? The bike doesn't look good without the logo in my opinion.

available at hyd svc .. just enquired for you .. they cost 800rs .. come in a set of two

**B7ACKTHORN** · 04-26-2013, 03:11 PM

Re: Pulsar 200 NS

For all the folks who are lamenting on the logo break up and peeling off, it happens on most Pulsars. Have you guys even seen the logo on the Pulsar 220 FI, which is one of my favorite. It's just sticker and the font makes it uber cool. I wondered, why they used the plastic logo instead of the sticker type used in FI.

I'd suggest those folks who are out of luck on the logo part, go to the SVC get the Pulsar 220 FI's tank decal and see what a difference it makes to the bike. Trust me it'd look even more cool, sexy than the plastic ones.

When the logo on my 220 gives up, three years still going strong, I will definitely revert to 220 Fi decals.

Cheers!
VJ

**spatil1986** · 04-26-2013, 03:44 PM

Re: Pulsar 200 NS

Originally posted by danny king View Post

Did he remove the tyre huggers or make any other changes for accommodating the new tyre ?

Has anyone fixed Duke tyres on NS?

Hi,

I fixed the Duke ka rear tyre recently... Awesome grip .. got 40.6 FE with resv to resv method... 60% city and the rest is highway.. Price INR 3000/- ..could not find the front tyre with the same profile..thus thinking whether to up size and fix the duke ka front tyre or not which is 110/70 .??? Waiting for reply from expertise..

Below is the image...

**Rajesh Javvadi** · 04-26-2013, 04:48 PM

Re: Pulsar 200 NS

Originally posted by spatil1986 View Post

Hi,

I fixed the Duke ka rear tyre recently... Awesome grip .. got 40.6 FE with resv to resv method... 60% city and the rest is highway.. Price INR 3000/- ..could not find the front tyre with the same profile..thus thinking whether to up size and fix the duke ka front tyre or not which is 110/70 .??? Waiting for reply from expertise..

Below is the image...

[ATTACH=CONFIG]99669[/ATTACH]

wow its looking awesome.. does our tire hugger fit properly with this tyre? Just in case of rainy season

----consecutive posts auto-merged-----

Originally posted by niteshneela View Post

had my 3rd servicing done 2 days back .. the bike is jerking very much since the servicing is done .. today i visited the svc and technician had a test drive .. he was sure that the fuel isnt getting properly to the card and that is what is causing the jerks ... he told to leave the bike der and collect it 2mrw evng .. is this a big issue ? is my bumblebee safe ?

----consecutive posts auto-merged-----

available at hyd svc .. just enquired for you .. they cost 800rs .. come in a set of two

Nice, thanks mate. I am from Hyderabad only will try those when mine completely gets peeled off.

**Sird** · 04-26-2013, 05:46 PM

Re: Pulsar 200 NS

Originally posted by spatil1986 View Post

Hi,

I fixed the Duke ka rear tyre recently... Awesome grip .. got 40.6 FE with resv to resv method... 60% city and the rest is highway.. Price INR 3000/- ..could not find the front tyre with the same profile..thus thinking whether to up size and fix the duke ka front tyre or not which is 110/70 .??? Waiting for reply from expertise..

Below is the image...

[ATTACH=CONFIG]99669[/ATTACH]

Wy are you trying to kill people here out of curiosity.
Tell the Tyre cornering and other experience.

Sent from my iPad using Tapatalk

**Harsh Thanvi** · 04-26-2013, 05:53 PM

Re: Pulsar 200 NS

Guys got something good
Tried by myself on my Aviator

Few months back there was some spilling of dye (chemical one) on my aviator it looked like some tea spitted
Was not able to remove it
Got one guy today selling this stuff

At goraegaon Petrol pump near Kalyan jewellers he still might be there
It is priced around 700
Works like a charm

Got the dye removed
Some scratches were also removed
IT SHINES LIKE A NEW ONE
The small container is a stain remover with acrylic coat
Left one waterless drywash car cleaner and polish also used fir bikes
Right one is a protector and shine giver

Harsh's iPhone
xBhp Connect

Announcement

Pulsar 200 NS Owners Review and Experiences

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment