Announcement

**gmagesh14** · 12-08-2011, 01:57 PM

Originally posted by anandsharma021 View Post

I like these kind of bikes (looks). Looking damn sexy to me.

I like the instrument cluster... Neatly done

**punarvasu** · 12-08-2011, 02:00 PM

Originally posted by anandsharma021 View Post

Is there any chance of this bike GSR150i launching in india. I like these kind of bikes (looks). Looking damn sexy to me.

Not at all sexier than SZ-R; I think.

**vikhyath** · 12-08-2011, 02:10 PM

Originally posted by anandsharma021 View Post

Nova GSR150i 2012 - YouTube

Is there any chance of this bike GSR150i launching in india. I like these kind of bikes (looks). Looking damn sexy to me.

Looks like an upgraded Heat to me...

**gmagesh14** · 12-08-2011, 02:11 PM

Originally posted by punarvasu View Post

heat-shrink tubing, 200 ml insulating varnish, 8 mm T spanner, 4 mm Allen key, 17 mm socket spanner and lever to drain the oil, 1 set of both large and small magneto cover gaskets, Anabond liquid gasket, 2-3 small wooden wedges, 5-6 finger caps used in kitchen etc.

Yes friend I'm gonna do... I request you to point out the steps to be followed and the materials required (detailed description & no abbrevations

)...
Indeed it will be very very helpful for the starters like me...
If it's possible to add it to the 1st page with the help of MODERATORS it'll be very much useful for everybody who wants to do DC conversion..

Things I've right now..,soldering lead, flux, high amp wire,heat shrink,8mm T spanner, allen key set, 17mm socket spanner & lever,

Things I want to know ,
1) DMM
2) 2-3 small wooden wedges (why required)
3) How to open the magneto cover
4) Should I need to get stator coil from SUZUKI?

Thanks & Regards,
.~MagesH~.

**ashoka_bnglr** · 12-08-2011, 02:13 PM

Originally posted by anandsharma021 View Post

Is there any chance of this bike GSR150i launching in india. I like these kind of bikes (looks). Looking damn sexy to me.

I think our GS 150R is way sexier than this

It looks very blunt ....(Disclaimer:Personal opinion only)
And the console on our GS is one of the best looking in 150 cc category
And I believe other technical specs are same?

**chiron** · 12-08-2011, 02:47 PM

Originally posted by anandsharma021 View Post

Is there any chance of this bike GSR150i launching in india. I like these kind of bikes (looks). Looking damn sexy to me.

I think a gs150r with round headlight would look cool. The rest of the looks are cooler on the 'r' than the 'i' though, especially the tail lamps.

**anandsharma021** · 12-08-2011, 03:24 PM

Originally posted by ashoka_bnglr View Post

I think our GS 150R is way sexier than this

It looks very blunt ....(Disclaimer:Personal opinion only)
And the console on our GS is one of the best looking in 150 cc category
And I believe other technical specs are same?

But i think GSR150i looks way better than GS150R. I like this type of looks. It looks macho and give feeling of harley davidson. Every 150cc in India has got looks like GS150r or pulsar.

Regarding console, you look at cbz xtreme and apache.

**ashoka_bnglr** · 12-08-2011, 03:35 PM

Originally posted by anandsharma021 View Post

But i think GSR150i looks way better than GS150R. I like this type of looks. It looks macho and give feeling of harley davidson. Every 150cc in India has got looks like GS150r or pulsar.

Thats why I put "Personal View" next to my sentence.

Originally posted by anandsharma021 View Post

Regarding console, you look at cbz xtreme and apache.

Did I say "only the Best" or 'One of the best".. Anyhow I liked GS's console over others..Its an individual's preference..

**punarvasu** · 12-08-2011, 03:47 PM

Originally posted by gmagesh14 View Post

Things I want to know ,
1) DMM
2) 2-3 small wooden wedges (why required)
3) How to open the magneto cover
4) Should I need to get stator coil from SUZUKI?

DMM means digital multimeter and wooden wedges are helpful to remove the stator cover by inserting it in the small gap you get at the initial point of removing it.
Opening the magneto cover is after collecting the essential materials. Price of a 12 pole stator is Rs. 845/- and additional one is not necessary.
Please be aware that I am not an electrical or two wheeler expert and hence my opinions may not be correct.

Originally posted by chiron View Post

I think a gs150r with round headlight would look cool. The rest of the looks are cooler on the 'r' than the 'i' though, especially the tail lamps.

Not sure about the appearance but a round headlight reflector gives more focused light.

**punarvasu** · 12-08-2011, 04:01 PM

Originally posted by anandsharma021 View Post

But i think GSR150i looks way better than GS150R. I like this type of looks. It looks macho and give feeling of harley davidson. Every 150cc in India has got looks like GS150r or pulsar.

Regarding console, you look at cbz xtreme and apache.

**gmagesh14** · 12-08-2011, 08:58 PM

Couldn't able to get RR & Gaskets today... Both are out of stock..
I checked at only one showroom. Will try at other showrooms tomorrow..

For the auto spare parts we've a separate area called Chintadripet in Chennai where all the spares are available.. Their I could find RR for APE which is just 320rs..
They are saying it's original., But I refused to take them and asked them to give the one which comes in sealed package with Piaggio name mentioned..

It was already 5pm and searching for the main dealers will take more time so just bought the copper wire & varnish and headed back to home...

Bought the 18swg wire of 500gms and insulating varnish of 225gms for 300 & 45rs respectively...

**vikhyath** · 12-08-2011, 09:16 PM

Originally posted by gmagesh14 View Post

Couldn't able to get RR & Gaskets today... Both are out of stock..
I checked at only one showroom. Will try at other showrooms tomorrow..

For the auto spare parts we've a separate area called Chintadripet in Chennai where all the spares are available.. Their I could find RR for APE which is just 320rs..
They are saying it's original., But I refused to take them and asked them to give the one which comes in sealed package with Piaggio name mentioned..

It was already 5pm and searching for the main dealers will take more time so just bought the copper wire & varnish and headed back to home...

Bought the 18swg wire of 500gms and insulating varnish of 225gms for 300 & 45rs respectively...

Please click photos of each step you do during the mod.

**gmagesh14** · 12-08-2011, 09:31 PM

Originally posted by vikhyath View Post

Please click photos of each step you do during the mod.

Sure Vikhyath, now collecting the required materials...
Will take a snap of all the materials too and post it here before staring the mod...

**punarvasu** · 12-08-2011, 09:49 PM

Originally posted by gmagesh14 View Post

Bought the 18swg wire of 500gms and insulating varnish of 225gms for 300 & 45rs respectively...

Ape’s original RR costs Rs. 1164/-. They offered you a duplicate RR, like made as (not in) USA. Try next time at Piaggio’s SC.
500 gms of wire is too much than needed.

**vulcan** · 12-08-2011, 09:52 PM

Originally posted by Maestro View Post

Yeah that's the maximum limit...... but the 55/60 would be enough.....

I hope you are still here in Mumbai ?
bcoz u have promised me a ride bro tell me when can we go for it ia m waiting eagerly for that one.
.

@ all GS riders in thane, mumbai,& nearby areas lets go for a day's ride plz guys. after 18th December
plz guys cmon its celebration time !!

Announcement

Suzuki GS150R

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment