Announcement

**satyajitrc** · 11-24-2011, 03:52 PM

ZMR Battery Life

Originally posted by veryhiphop View Post

SVC person does not check battery with battery checker...Also i think they are not having a battery checker...the earlier SVC where i done all my services till one year...they used to have....

but it seems to be fine... As on starting the bike get started instantly...lights/horns everything is fine....

Probably we have lot of friends who have already done 20,000 kms and above.
How many of them have changed the batteries or are due for change?
Not considering others who have had to change during warranty period.

On an average what is the life of ZMR Batteries (12V - 6Ah MF)

Although the manual states 20000kms or 18 months...

**Above_All** · 11-24-2011, 05:34 PM

Originally posted by veryhiphop View Post

SVC person does not check battery with battery checker...Also i think they are not having a battery checker...the earlier SVC where i done all my services till one year...they used to have....

but it seems to be fine... As on starting the bike get started instantly...lights/horns everything is fine....

Ok so what they have checked ? Are they checked all connectors ?

Originally posted by satyajitrc View Post

Probably we have lot of friends who have already done 20,000 kms and above.
How many of them have changed the batteries or are due for change?
Not considering others who have had to change during warranty period.

On an average what is the life of ZMR Batteries (12V - 6Ah MF)

Although the manual states 20000kms or 18 months...

I am not sure but it will gonna serve atleast 2 year if we use with care like no headlight on when engine is off & no extra load , but i think it can serve more years too.

OT : as in my passion exide stock 2.5 ah battery which has 1 year warrenty work good for 4 years , then i replaced it with a dry mf battery local one & its been 5 years old now & still fine , driving both pair of vibrasonic & pair of windtone horns easily .

**Dan_GP** · 11-24-2011, 07:09 PM

Is the tappet clearence of ZMR 0.1mm or 0.04mm in both inlet and exaust?? I'm confused coz I'm going to adjust the tappets tommorow

**Aneesh@4GHz** · 11-24-2011, 07:12 PM

Its 0.1 for ZMA,Guess it will be same for ZMR too.

Have a look at the Karizma Tappet Adjustment in DIY section,will help you a lot.

**Mzee_Maverik** · 11-24-2011, 07:20 PM

Originally posted by Dan_GP View Post

Is the tappet clearence of ZMR 0.1mm or 0.04mm in both inlet and exaust?? I'm confused coz I'm going to adjust the tappets tommorow

tappet clearance of ZMR is 0.10mm for both inlet and outlet valves.
plz read the user manual once.

**Mahindra** · 11-24-2011, 07:21 PM

Originally posted by manan3230 View Post

few days back some1 wanted to know where is bank angle sensor ....so here it goes

Dude where u got this zmr service manual... Can u upload it?....

**Aneesh@4GHz** · 11-24-2011, 07:29 PM

Originally posted by Mahindra View Post

Dude where u got this zmr service manual... Can u upload it?....

+1^^^

Please.

**RedFlash** · 11-24-2011, 07:56 PM

Originally posted by Mzee_Maverik View Post

tappet clearance of ZMR is 0.10mm for both inlet and outlet valves.
plz read the user manual once.

Woot, Its just 0.1mm ??

My previous bike had 0.13mm for 2inlet valves and 0.15.. for 2exhaust valves
P.S. My previous bike was Hyousung GF125 4 Valve (NOT Kinetic as it was imported from Korea)

Originally posted by Mahindra View Post

Dude where u got this zmr service manual... Can u upload it?....

+1 to that

**Mahindra** · 11-24-2011, 07:57 PM

Originally posted by psr View Post

The Golden color is just a paint coating, and if you want you can buy the same from hardware stores in small quantity and redo it,or get a Aerosol can of same color for about 120/- and paint it.
Take out the pads and check for oil stain and clean/replace.

Thanks sir i ll do it...

Sir i just checked whether my bank angle sensor is working... I tilted my bike almost and till it touched saree guard.. But the engine didnt switched off... and i have waited for about 8 secs..

Is my sensor working or not?

**manan3230** · 11-24-2011, 08:44 PM

Originally posted by Mahindra View Post

Thanks sir i ll do it...

Sir i just checked whether my bank angle sensor is working... I tilted my bike almost and till it touched saree guard.. But the engine didnt switched off... and i have waited for about 8 secs..

Is my sensor working or not?

engine stops after 45sec

@all got manual from workshop
for few min ....only got to xerox 10pages only

its of 300pags +
but i can read the book at workshop if i want ....dont know if they will giv me to xerox again

**Dan_GP** · 11-24-2011, 09:19 PM

Originally posted by Mzee_Maverik View Post

tappet clearance of ZMR is 0.10mm for both inlet and outlet valves.
plz read the user manual once.

Ooops, got it bro. There was a confusion between Inch and Milimeters

**Mahindra** · 11-24-2011, 09:29 PM

Originally posted by manan3230 View Post

engine stops after 45sec

@all got manual from workshop
for few min ....only got to xerox 10pages only

its of 300pags +
but i can read the book at workshop if i want ....dont know if they will giv me to xerox again

You could have scanned it... so it help everyone...

But bro after 45secs the engine turns off then whats the use of it... no use..
As per The pic u have posted told after 5 secs+ it will turn off...

**psr** · 11-24-2011, 09:49 PM

Originally posted by Mahindra View Post

T
Sir i just checked whether my bank angle sensor is working... I tilted my bike almost and till it touched saree guard.. But the engine didnt switched off... and i have waited for about 8 secs..

Is my sensor working or not?

Since I do not have data on whether it has time delay to act, I am unable to give you a clear opinion...but judging by the previous post wherein it is mentioned as 5 sec delay , I guess the tilt sensor should cut off the engine in 5 seconds...Actual users can give correct info...

**RedFlash** · 11-24-2011, 11:27 PM

That bloody sensor did not cut off engine after around 2 mins.

Source : My last crash.

My bike was dragged for around 100 meters(approx), I was injured a bit. Till I got up (Which took lot of effort and time [Say around 40 Seconds]) and to walk 100 meters (approx) with injured leg 1 min 30 sec.

**psr** · 11-24-2011, 11:32 PM

Originally posted by RedFlash View Post

That bloody sensor did not cut off engine after around 2 mins.

Source : My last crash.

My bike was dragged for around 100 meters(approx), I was injured a bit. Till I got up (Which took lot of effort and time [Say around 40 Seconds]) and to walk 100 meters (approx) with injured leg 1 min 30 sec.

Sorry to hear of your crash....guess you are ok now.
If after nearly 90 + seconds,the sensor does not switch off the engine, either the connection is faulty or the sensor is Kaput.

Announcement

Hero Honda Karizma ZMR

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment