Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

The slower the vehicle, the quicker it can turn.

Our Partner

Announcement

Collapse
No announcement yet.

Pulsar 220 DTS-Fi

Collapse
X
Collapse
 
  • Page of 542
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 313 363 403 408 409 410 411 412 413 414 415 416 417 418 423 463 513 542 template Next
  • #6181
    Originally posted by Praful View Post
    500 Kms should be OK! Even during this running in you can ride the bike normally, just don't exceed 6K RPM!

    Just hope that rings replacement fixes the oil drinking problem. If it does not you might need to replace the bore!
    Thanks..lets hope the rings solve the problem Will update once i get it replaced and complete atleast 500-600kms..pray for my bike

    Praful one more question since you have got your silencer replaced 2-3 time i guess what was the exact cause of the problem?
    My bike is running on the 2nd exhaust, first one replaced due to accident.
    The exhaust starts to rattle very badly after i ride for 2-3 kms say at 70-80 kmph for sumtime and then keeps on rattling until i switch off the engine for sumtime.
    Its like when it is cool it does not rattle but when i ride hard for few kms the loud rattling starts. Showed it to PBK but since the exahust had become cool it didnt rattle and they couldnt help me..
    Last edited by AashishS; 05-09-2011, 12:17 AM.
    sigpic

    Comment

    • #6182
      hello every1 p220 owners frm bangalore take a special look...

      hi guys dis is shubhajit.i own a p220 dtsi.well being d ass i am i didnt wait long to start revving my bike. (cant help it when ur wid d fastest babe ).well den i got a k&n .everythin was fyn until one day my frnd took my babe out.i dnt know wat happened bt he said d byk stopped.well i took it to a local mech in kengeri satellite town.d ass tuned my bike in a way dat i was loosin out power.i couldnt rev lyk i used to.den another mech said "air chod rahi hain" sumthin to do wid air.he tuned it again.d revin improved bt i lost out on my top speed.i went till 137 on my bike.now after 110-120 it juz gives up.as if its tired.wats wrong wid my bike n where do i get d doc?i dnt trust khivraj coz first service i felt dey juz washed it .suggest any gud mechanic who can treat her good.
      i bought my bike last year in june.last readin i saw was 12723 km. am i ridin too much?? .should i change my tyre?

      Comment

      • #6183
        Originally posted by A@shIsh View Post
        Thanks..lets hope the rings solve the problem Will update once i get it replaced and complete atleast 500-600kms..pray for my bike

        Praful one more question since you have got your silencer replaced 2-3 time i guess what was the exact cause of the problem?
        My bike is running on the 2nd exhaust, first one replaced due to accident.
        The exhaust starts to rattle very badly after i ride for 2-3 kms say at 70-80 kmph for sumtime and then keeps on rattling until i switch off the engine for sumtime.
        Its like when it is cool it does not rattle but when i ride hard for few kms the loud rattling starts. Showed it to PBK but since the exahust had become cool it didnt rattle and they couldnt help me..
        I'm on my 7th exhaust Don't ask how and why

        Usually the internal welds of the silencer break off and coz the internal pipe to rattle about. Rip all the way to PBK to show them the problem with your bike

        Originally posted by shooms7 View Post
        i bought my bike last year in june.last readin i saw was 12723 km. am i ridin too much?? .should i change my tyre?
        We don't type "lyk" this on xBhp. Please avoid SMS lingo in the future

        Show your bike to the Bajaj Pro-Biking they are your best bet, change your tyres if they are worn out already though 12K is too early for that!

        PS: This is the 220 Fi thread, the 220 Dts-i thread is here!
        _________________________
        LoneWolfRides©

        Comment

        • #6184
          Originally posted by Praful View Post
          I'm on my 7th exhaust Don't ask how and why

          Usually the internal welds of the silencer break off and coz the internal pipe to rattle about. Rip all the way to PBK to show them the problem with your bike
          7th Exhaust Guruji tusi great ho

          I have tried that went riping to PBK, switched off the bike and by the time i called the Mechanic outside to check it "abra ka dabra" no Noise at all

          I guess its time to Get my Bike Joel-ed
          sigpic

          Comment

          • #6185
            i am so sorry!! :P

            i am so used to typing LYK DAT ....this world wide web has totally ruined my english and my spellings.anyways thanks for the reply. i heard there is something called the auto service in banshankari. is that a good place for my bike?

            Comment

            • #6186
              7th Exhaust Guruji tusi great ho

              I have tried that went riping to PBK, switched off the bike and by the time i called the Mechanic outside to check it "abra ka dabra" no Noise at all

              I guess its time to Get my Bike Joel-ed
              I am not great.. The great bajaj and their amazing quality is the result of this. Twice it was replaced under warranty, thrice due to falls, and the other 2 times because warranty was not there but the silence was damaged anyways...



              Originally posted by shooms7 View Post
              i am so used to typing LYK DAT ....this world wide web has totally ruined my english and my spellings.anyways thanks for the reply. i heard there is something called the auto service in banshankari. is that a good place for my bike?
              Thank you for not typing lyk this

              AutoService is one the best Bajaj PBK's out there. I've been their customer for the last 3.5 years
              _________________________
              LoneWolfRides©

              Comment

              • #6187
                Originally posted by Praful View Post
                I am not great.. The great bajaj and their amazing quality is the result of this. Twice it was replaced under warranty, thrice due to falls, and the other 2 times because warranty was not there but the silence was damaged anyways...
                Nice
                Seriously quality is not that gud, it shows when the parts start to age with time and usage. Anyways thanks for your prompt replies. I am thinking to get FFE from Joel this time

                Lets hope the oil drinking problem gets solved first..getting sleepless nights
                sigpic

                Comment

                • #6188
                  Well the exhaust is the only part thats weak. The newer lot of exhaust are much much better, I haven't changed mine in the past 1.5 years

                  Before you go the Joel way, ensure that your bike is already in top shape.
                  _________________________
                  LoneWolfRides©

                  Comment

                  • #6189
                    Originally posted by Praful View Post
                    Well the exhaust is the only part thats weak. The newer lot of exhaust are much much better, I haven't changed mine in the past 1.5 years

                    Before you go the Joel way, ensure that your bike is already in top shape.
                    Yes Sir!

                    Actualy not planning to go for the stock this time because its been 4 yrs now since i got this bike, mine is from the first batch of P200's (Apr'07 lot). I am slowly getting bored from my bike so thought FFE would add some lost charm to it. But as you said i need to address the other issues first so thats the priority as of now.
                    Till then the rattling from the silencer will make each ride memorable People stare when i ride! yeah its so loud now
                    Last edited by AashishS; 05-09-2011, 02:09 PM.
                    sigpic

                    Comment

                    • #6190
                      Piston Rings replaced today @ 31,000kms (P200's)

                      Cost as follows (for New Delhi Only):

                      Ring Set Piston: Rs.210/-
                      Gasket Cylinder:Rs.63/- (Quantity-1)
                      Gasket Cylinder:Rs.20/- (Quantity-2)
                      Valve Kit (inlet): Rs.243/-
                      Labour Charges:Rs.350/-

                      Total Cost: Rs.886/- + taxes

                      Thought of sharig the Rates, it might help others who are planing to get the Piston Rings replaced

                      Bike is running very smooth right now, Compression is also back to normal @ 12.5
                      sigpic

                      Comment

                      • #6191
                        Originally posted by A@shIsh View Post
                        Piston Rings replaced today @ 31,000kms (P200's)

                        Cost as follows (for New Delhi Only):

                        Ring Set Piston: Rs.210/-
                        Gasket Cylinder:Rs.63/- (Quantity-1)
                        Gasket Cylinder:Rs.20/- (Quantity-2)
                        Valve Kit (inlet): Rs.243/-
                        Labour Charges:Rs.350/-

                        Total Cost: Rs.886/- + taxes

                        Thought of sharig the Rates, it might help others who are planing to get the Piston Rings replaced

                        Bike is running very smooth right now, Compression is also back to normal @ 12.5
                        Go easy on the bike for about 500 Kms!

                        After that see if you still face the leaking problem!
                        _________________________
                        LoneWolfRides©

                        Comment

                        • #6192
                          Originally posted by Praful View Post
                          Go easy on the bike for about 500 Kms!

                          After that see if you still face the leaking problem!
                          Yes, as you told earlier i am Not crossing 6K RPM
                          sigpic

                          Comment

                          • #6193
                            Originally posted by A@shIsh View Post
                            Piston Rings replaced today @ 31,000kms (P200's)

                            Cost as follows (for New Delhi Only):

                            Ring Set Piston: Rs.210/-
                            Gasket Cylinder:Rs.63/- (Quantity-1)
                            Gasket Cylinder:Rs.20/- (Quantity-2)
                            Valve Kit (inlet): Rs.243/-
                            Labour Charges:Rs.350/-

                            Total Cost: Rs.886/- + taxes

                            Thought of sharig the Rates, it might help others who are planing to get the Piston Rings replaced

                            Bike is running very smooth right now, Compression is also back to normal @ 12.5
                            Thanks bro.. that was a big big help.. . I went to PBK here in Pune a couple of days back and those guys were telling me "We don't change piston rings here! We have never changed Piston rings here. We always change entire block piston set. But if you want, we will do it for you."

                            They didn't have the rings though... placed an order for the same. Hopefully the rings will be here in 3 more days. Currently on 30572km. Did a Pune - Mumbai - Pune ride yesterday with pillion.. Could feel it become increasingly sluggish especially in the low revs.. Maybe that could be attributed *somewhat* to the Sirac.. but still I could actually feel the sluggishness.. never before has the bike behaved like this. Even the FE was a low 31 with me riding strictly in the 80-105 range.
                            Advice is a form of nostalgia.
                            Dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than it's worth.

                            Antz Travelz!! | South India Exploration Ride | Leh Triplog (Work in progress)

                            Comment

                            • #6194
                              Originally posted by antz.bin View Post
                              Thanks bro.. that was a big big help.. . I went to PBK here in Pune a couple of days back and those guys were telling me "We don't change piston rings here! We have never changed Piston rings here. We always change entire block piston set. But if you want, we will do it for you."

                              They didn't have the rings though... placed an order for the same. Hopefully the rings will be here in 3 more days. Currently on 30572km. Did a Pune - Mumbai - Pune ride yesterday with pillion.. Could feel it become increasingly sluggish especially in the low revs.. Maybe that could be attributed *somewhat* to the Sirac.. but still I could actually feel the sluggishness.. never before has the bike behaved like this. Even the FE was a low 31 with me riding strictly in the 80-105 range.
                              Try another PBK if they are refusing you. It might be becasue they didnt have stock of rings. Changing rings is not a very tough job but requries a traiined and experienced mechanic.
                              sigpic

                              Comment

                              • #6195
                                Originally posted by A@shIsh View Post
                                Piston Rings replaced today @ 31,000kms (P200's)

                                Cost as follows (for New Delhi Only):

                                Ring Set Piston: Rs.210/-
                                Gasket Cylinder:Rs.63/- (Quantity-1)
                                Gasket Cylinder:Rs.20/- (Quantity-2)
                                Valve Kit (inlet): Rs.243/-
                                Labour Charges:Rs.350/-

                                Total Cost: Rs.886/- + taxes

                                Thought of sharig the Rates, it might help others who are planing to get the Piston Rings replaced

                                Bike is running very smooth right now, Compression is also back to normal @ 12.5
                                thanks a lot of the info mate , 23k km done on my p200 so wud be needing this info pretty soon
                                also nice to know p200 spares are easily available,that's such a relief
                                Four wheels is transportation. Two wheels is attitude.

                                Comment

                                Previous 1 313 363 403 408 409 410 411 412 413 414 415 416 417 418 423 463 513 542 template Next
                                Working...
                                X
                                © xBhp.com 2026. All rights reserved.
                                Designed by xBhp