Announcement

**rcmadawala** · 12-26-2009, 12:55 AM

Originally posted by HydBiker View Post

^^^ Cheers & Welcome buddy.

So the P200 is still sold in SL!

BTW, the Bajaj clipons (from the P180 or P220) are good and you don't need many parts to be changed. The warranty thing will not have anything to do with this but in reality it depends on your dealer. What modifications would you want to do to the handlebar / What better stuff have you got that you want to change the stock ones? Would you pls post a snap of those... if you have already seen some.

Thanks for Helping me pal.
I just want this look on my handle bar and i wouldn't expect any more changes than the picture that i posted already.

I didn't know pulsar 180 have a clipons.

So can i Fit to pulsar 180 clipons to my 200? because in Sri Lanka, They didn't released the pulsar 220 version yet. so i think it will be hard to find pulsar 220 accessories in sri lanka.

If i can use pulsar 180 clipons without hassle, it would be great (because 180 vesrion is available here and so do the accessories). So please help me on this. a guide to do this would be appreciate

**truelypulsarian** · 12-26-2009, 08:55 AM

Originally posted by rcmadawala View Post

Thanks for Helping me pal.
I just want this look on my handle bar and i wouldn't expect any more changes than the picture that i posted already.

I didn't know pulsar 180 have a clipons.

So can i Fit to pulsar 180 clipons to my 200? because in Sri Lanka, They didn't released the pulsar 220 version yet. so i think it will be hard to find pulsar 220 accessories in sri lanka.

If i can use pulsar 180 clipons without hassle, it would be great (because 180 vesrion is available here and so do the accessories). So please help me on this. a guide to do this would be appreciate

New p180 has clipons same as in 220 u can go for them with out any doubt

**rcmadawala** · 12-26-2009, 09:38 AM

Originally posted by truelypulsarian View Post

New p180 has clipons same as in 220 u can go for them with out any doubt

Thanks mate. i will go to the bajaj and take the clipons ASAP.

There is another thing i would like to ask from you guys.

I saw many people talking about replacing the coil pack to avenger 180's and put osram night breaker 60W Bulb. so here is the question

Will avenger 180's coil pack cause to over charge my pulsar 200 battrey or do some harm to electrical system on the bike?

**rcmadawala** · 12-26-2009, 09:43 AM

Oops. i didn't saw that i am in the pulsar 220 section

**monty007** · 12-26-2009, 10:49 AM

Originally posted by rcmadawala View Post

Guys,
I am from sri lanka and this is my 1st post

Finally i got my dream bike 3 weeks a go. she is a Red 200 one (with white taco meter).

i saw this Pictures in xBhp today.

All i want to know that, can i do this modification to my handle without replacing it? If i have to replace it, does it avoid the warranty?

welcome bro..n conggratz for your bike. .
well u can surely avail pulsar 180 clip ons...as well i dont think warranty wud be void..

**truelypulsarian** · 12-26-2009, 10:12 PM

Guys as mentioned in the earlier posts iam facing a strange problem from the past few days at lowerspeeds my bike's engine suddenly gets off & also there r few misfirings[phat sound from the scilencer followed by engine shutdown]tday went to pbk.The pbk guys told that to change fuel filter & they changed after that they attached the fi tool to some of the wires which are below the seat to check any sensor damage luckily there were no sensor damage. and again tday my bikes engine shut down 2 times what could be the problem??? help me out regarding this issue

Thankz in advance

**ajinkya** · 12-27-2009, 02:16 AM

^^^most proberbly your co is out of whack.

**payeng** · 12-27-2009, 06:56 AM

Originally posted by truelypulsarian View Post

Guys as mentioned in the earlier posts iam facing a strange problem from the past few days at lowerspeeds my bike's engine suddenly gets off & also there r few misfirings[phat sound from the scilencer followed by engine shutdown]tday went to pbk.The pbk guys told that to change fuel filter & they changed after that they attached the fi tool to some of the wires which are below the seat to check any sensor damage luckily there were no sensor damage. and again tday my bikes engine shut down 2 times what could be the problem??? help me out regarding this issue

Thankz in advance

It happens on my bike too when the "CO" settings need to be set.
Get the "CO" settings of your bike set.

**rahul9985** · 12-27-2009, 10:50 AM

Originally posted by truelypulsarian View Post

Guys as mentioned in the earlier posts iam facing a strange problem from the past few days at lowerspeeds my bike's engine suddenly gets off & also there r few misfirings[phat sound from the scilencer followed by engine shutdown]tday went to pbk.The pbk guys told that to change fuel filter & they changed after that they attached the fi tool to some of the wires which are below the seat to check any sensor damage luckily there were no sensor damage. and again tday my bikes engine shut down 2 times what could be the problem??? help me out regarding this issue

Thankz in advance

Good. Atleast u went to pbk.
Now check these:
1. Get the CO adjusted.
2. Get the throttle body cleaned
3. At lower speeds downshift and ride

**truelypulsarian** · 12-27-2009, 12:06 PM

Compared to the earlier now my bike is running very smooth & fine

misfiring problem had gone now.the only problem now iam facing is engine shutdown that too rarely

.Tommorow gng to PBK again to solve this minute issue

Thankz guys for your suggestions

**truelypulsarian** · 12-27-2009, 05:46 PM

Guys can be CO adjusted with that FI tool??? because here in HYD the CO machine is not working

.

**rcmadawala** · 12-27-2009, 07:34 PM

Hey,
What are the good ANGEL EYES for pulsar 200cc red bike?
I want to put Two Angel Eyes with 35w HID. i saw the R15 Angel eyes. can i fit those eyes to my pulsar ?

**vid_powerstroke** · 12-27-2009, 08:12 PM

Originally posted by truelypulsarian View Post

Guys can be CO adjusted with that FI tool??? because here in HYD the CO machine is not working

.

co needs a tool to be adjusted ? the amount of co (carbon monoxide) depends on how well ur AFR is... ur fuel burns better= less co%=good engine

**rcmadawala** · 12-27-2009, 08:16 PM

Originally posted by rcmadawala View Post

Hey,
What are the good ANGEL EYES for pulsar 200cc red bike?
I want to put Two Angel Eyes with 35w HID. i saw the R15 Angel eyes. can i fit those eyes to my pulsar ?

GUYS, I AM WAITING FOR YOUR HELP HERE

**rahul9985** · 12-27-2009, 08:41 PM

Originally posted by vid_powerstroke View Post

co needs a tool to be adjusted ? the amount of co (carbon monoxide) depends on how well ur AFR is... ur fuel burns better= less co%=good engine

Just for clarification.

CO is Carbon Monoxide in the exhaust gases. It is directly proportional to AFR.
AFR is Air Fuel Ratio.
If AFR > stoic ratio (14.7:1) it is lean.
If AFR < stoic ratio it is rich.
Optimum AFR is slightly less than stoic ratio.
AFR in FI bikes can be adjusted only through diagnostic tool. So CO can be adjusted only through diagnostic tool. Optimum CO reading in the exhaust gas analyzer should be 2-2.5.
AFR can be adjusted without the CO machine as well. But highly NOT suggested.

Originally posted by rcmadawala View Post

GUYS, I AM WAITING FOR YOUR HELP HERE

Yes Angel Eyes can be fit on any bike. But it is more of a DIY job. It depends from person to person.

PS- Dont post in Upper Case. It is considered shouting. Kindly wait for others to login and reply.

Announcement

Pulsar 220 DTS-Fi

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment