What if i do some graphics work instead of paint?

plz suggest, m all confused..it shuldnt have happnd to new bike..itz hurting..

Do they replace tank as well?
worst part major color spread is in tank...

Me too faced the same problem when my bike had just done 40kms !!.. had gone to SVC and checked.. Coolant was very low and it was not fully flowing.. So filled it up and that's it.. now i have done 43500 kms on my bike... it haven't(temp warning light) blinked once... i guess that might be the problem with yours too..

Guys i need your help, i dunno wht to do but diz lukin ugly on my byk..As it was raining heavily i covered my byk with red color yamaha(cover)which came along wid accessories, later on when rain stopped i opened it nd was shocked to see all red color over my bike tank, fairing, tail grabs which seems not be going even puttin all my efforts to remove, gues it has incorporated with my bike color...now my yellow r15 turned into slight reddish due to spread of that color...itz all over the bike now...itz disaster, neva expected this...my byk is juz 2 weeks old..done only 500 odd kms..and this thing happened..what shall i do? is der any solution to remove this color..i am worried plz plz plz plz help

Hi Guys,

Just wanted to share a picture of my new ride with you people.
Done 130 km now and lubed the chain once. It feels better now and the rustling is nowhere to be heard.

what happened to the light bro?



RIDE SAFE

Hi Prakritij

The light is perfectly fine, its just the plastic cover which is still stuck..

^^^ maybe in India, Satyen, but I have seen it regularly done in U.K. In fact, I know of a firm which uses a very sophisticated system of gigs, lasers, measuring sensors and software to do the same. They claim (though never witnessed it) that they can take a brand new stock chassis and still fine tune it to correct for production based variations.

So, As mentioned in Earlier post, I went to another SVC in New Delhi "SETCO".

They Test rode the bike and Quoted the following:

Shocker/Fork Alignment : 600 INR
Front Cowling: 685 INR
RHS Side Inner Fairing: 800 INR
RHS Side Panel : 650 INR
RHS RVM : 251 INR
Labour Charges: 300 INR

As per them, There is no damage to chasis of any type and No alignments etc needed for it.

However, The Side Panel available with them was of the 20P1 series (Older Graphics ones); So, I refused to replace that and so the total cost came to approx 2650 INR.

AFAIK Insurance valuation of Fiber parts are about 50% so, I didn't claim any insurance as I was told by the SVC floor manager that alignment won't be covered in Insurance as it is not a replaced part and they (Insurance company) need damaged parts.

All this took approx 4 hrs; but I'm happy..

Only sore point is that the Side panel is still the old scratched one.

I need a few suggestions; Now, I'm thinking about putting some custom Vinyls (tribal/ Racing strips) on both side panels. It should be able to hide the scratches as scratches ain't scattered on whole surface but just at the point of impact. It isn't broken or cracked; so I think the Vinyl should be OK.

Please suggest.

This is a lil bit of BS. If you tell them that you want to claim replacement of the forks, it can be done. And for the R15 i would suggest that you go with replacement, not repair. Its not a low end machine. The chassis and suspension setup need to be perfect.

The forks can easily be bent further by the mechanic ( beyond repair ), and new ones can be ordered. you pay about 10-15% of the price depending on depreciation.

Guys i need your help, i dunno wht to do but diz lukin ugly on my byk..As it was raining heavily i covered my byk with red color yamaha(cover)which came along wid accessories, later on when rain stopped i opened it nd was shocked to see all red color over my bike tank, fairing, tail grabs which seems not be going even puttin all my efforts to remove, gues it has incorporated with my bike color...now my yellow r15 turned into slight reddish due to spread of that color...itz all over the bike now...itz disaster, neva expected this...my byk is juz 2 weeks old..done only 500 odd kms..and this thing happened..what shall i do? is der any solution to remove this color..i am worried plz plz plz plz help

Just a tip... before you throw in vinyl be sure to sand it first... else the vinyl would start puffing and peeling. Apply a clear coat if you are happy with the work!

Guys
any idea aoubt the price of the Chain & Sprocket? Is it necessary to change the sprocket along with the chain? need advice

Yes around 1400rs for ROLON chain set, which comes with 38B1 and 38B2 and around 2800rs for the DID chain set. And yes the chain has to be changed along with the sprocket, as along with the chain the sproket also has wear and tear.

Thanks Shivanshu for the Quick reply.
Mine is a 2010 Version So which one will be mine ROLON / DID?
Seems like it's gonna cost me a bomb after adding the labour charge

But i got to change it as i feel the chain is pretty loose.
Is there any harm (Other than the dip in performance) if i continue to use the same chain for some more time?