Tweet
R15 electric wiring map?
Can anyone guide me whr and how to find the R15 electric wiring map?
Can anyone guide me whr and how to find the R15 electric wiring map?
-
-
I had done a Konkan Trip on my R15 in March and have posted my experiences and feedback of the ride. You can read about it on the link below. The feedback is on page 5.
Motorcycle travelogues by thousands of xBhpians from across the world.Ride To LiveComment
-
Google it and found - 270mm front disc and 230mm diameter rear discOriginally posted by Parth View PostComment
-
You sure? Cos the V2 has a 220mm diameter rear disk it is supposed to be bigger than the V1.Originally posted by JitenMistry View Post
The R15V1 manual says that it has a 203mm diameter rear discComment
-
Sorry, this is for Version 2Originally posted by TeeJayy View Post
As per SERVICE MANUAL of YZF-R1520P (version 1) front Disc outside diameter is 267.0 and Rear Disc outside diamete is 203.0.Comment
-
To all,
I have been facing this strange issue for a loong time now, the source has not been detected by the svc yet..
the bike misfires at a specific rpm, i.e. if i blip the throttle and let go, at around 3.2k rpm, i hear a knock from the engine..
also, there is a constant humming from sound coming (not fuel pump/petrol vapours) from the engine when riding constantly at 4-5k rpm in 6th gear, the sound was there from the starting but now it has gotten louder and can be hear in 3,4 and 5th gears also..
is this common?? what could it be??
after monday and tuesday, even the calendar says WTF!!
Comment
-
^^you are probably leaning out on sudden deceleration, dont worry its normal and happens in all bikes but its generally not noticeable. Are you running a stock exhaust??
the humming could be because of your chain rubbing on sumthin, had that issue wid my bike and it took a long time to figure out, start by checking the chain if it is fine then probe into other probable causes.Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!' -Hunter S. ThompsonComment
-
yes, running on the stock exhaust...Originally posted by revvhard View Post
humming surely from the engine only, not the chain in any case..after monday and tuesday, even the calendar says WTF!!
Comment
-
Not exactly the same problem, But from past two weeks have been noticing
- The bike starts vibrating <not sure if it the fairing or something else> on 1st and 2nd gear above 5 rpm and above 7.5 rpm for 3rd and 4th. 5th and 6th are good but the whole ride feel is not the same.
- While deaccelerating after a rip, the vibrations again kick in.
- 1st and 2nd gear change have gone from 'click' to pressing a lever.
- 2nd gear unable to pick up at 15Kmph with a pillion.
This all after a service 500 Km back.
A week back, while starting the engine, a thud thud noice started coming in from the engine and it failed to start. I swtiched off the ignition, tried again. It started normal, but afterwards, every now and then, i feel that thud voice, which is now not that loud, but as if there is a stone roaming in the engine room. In all, the engine beat is not good. and no offence but i feel like am riding a bajaj instead of a yamaha.
Am pretty irritated, not getting time these days, might head to showroom on Saturday.
Someone has any clue on something specific i should get the attention of SVC people to.Ride On,
AkshatComment
-
Mybe some sort of problem with ur engine then if its nt the chain, leaning out on deceleration in a stock bike isnt good get ur bike checked there is a problem somwhere in the fuelling system.Originally posted by veyron999 View PostLife should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!' -Hunter S. ThompsonComment
-
check out the fuel pump pipe it might have loosen up
Originally posted by veyron999 View PostTo all,
I have been facing this strange issue for a loong time now, the source has not been detected by the svc yet..
the bike misfires at a specific rpm, i.e. if i blip the throttle and let go, at around 3.2k rpm, i hear a knock from the engine..
also, there is a constant humming from sound coming (not fuel pump/petrol vapours) from the engine when riding constantly at 4-5k rpm in 6th gear, the sound was there from the starting but now it has gotten louder and can be hear in 3,4 and 5th gears also..
is this common?? what could it be??
hi
its the problem with the fuel pump pipe has loosen up, check it ASAP with the yamaha service station, i had the same issue.DRIVE SAFE, RIDE HARDER
SHARDUL
Comment
-
Bumping once again. Any solution for this issue ?Originally posted by chiyaanchinnu View Post"As long as there's a horizon and I can see it, then I want to know what's there, mentally, physically and visually" - rtwpaulComment
-
can you be more specific? which fuel pump pipe?Originally posted by shardul View Post
and can you elaborate the issue you faced so that all members here can find a solution easily if they are facing the same issue..after monday and tuesday, even the calendar says WTF!!
Comment
Comment