Apart from that I was facing a bit of problem while shifting into 2nd gear from 1st, as the bike would get stuck in neutral. Also, downshifts had become a pain really. But all this vanished at first service when they changed the oil. How many km's have you clocked after you had the first service done?
Announcement
Collapse
No announcement yet.
Yamaha YZF-R15
Collapse
X
-
1 thing I've noticed about the R15 is that the gearbox is so smooth that even when sometimes you dont pull in the clutch fully, the gears shift effortlessly. I've done this a couple of times by mistake and didn't even knew that I was doing it till another r15 rider corrected me. So kinddly make sure that you arent making the same mistake.Originally posted by TwistedSouL View Post
Apart from that I was facing a bit of problem while shifting into 2nd gear from 1st, as the bike would get stuck in neutral. Also, downshifts had become a pain really. But all this vanished at first service when they changed the oil. How many km's have you clocked after you had the first service done?
-
Apart from that I was facing a bit of problem while shifting into 2nd gear from 1st, as the bike would get stuck in neutral. Also, downshifts had become a pain really. But all this vanished at first service when they changed the oil. How many km's have you clocked after you had the first service done?
I am experiencing the same thing. Shifting from 1st to 2nd is a bit sluggish as the lever stops in neutral otherwise the shifting is smooth.
Comment
-
Originally posted by Vdp View PostI haven't had a single quality issue with mine so far (Bought April 2010).
What I was asking was, performance and handling wise, is there a diff?
Also, my rear shock seems to be really stiff, throws me off the seat on low speed bumps. Is this normal?(I weigh around 53 kg) The front forks make a squishing noise when going over ruts and bumps at low speeds. Does that mean they're low on oil? In any case, they're not major enough to be called quality issues. Right?
I am facing the same problem of squishing noise from the front shock absorbers. Can u tell me is any of your frnd is facing the same issue as I have seen some bikes without it..svc guys says that it is normal and I dont believe them...
Comment
-
-
help!!
hey friends,
you all guys are very helpful
. need your help again
i met up with a small accident couple of days back on my r15.
it was a rainy day i got slipped off the road. i was slow. only the right side of the bike is slightly damaged. i need to claim for the insurance. i do not know what to do next.
please help me what i do now to get the insurance claim.
it would be a great help. i also attach a pic of my damaged love
yEs yAmAhA!
YZF R15, my love
sigpic
Comment
-
Which SVC is this, what oil are you using & how much has the bike clocked since last oil change?Originally posted by TwistedSouL View PostGuys i am really dissapointed with yamaha svc...
my r15 gears feels really hard.when complained about these issue they just told me that i am not dowshifting correctly even when i argued with them,they didn't budge in
A** Holes...
guys please tell me whats the problem with my bike
its just 45 days old bike and 1 free service also done still the gears are
hard especially when upshifting to 3rd gear and all downshifting gears
are hard...nowadays i dont even like to take out the bike
If it is Yamalube SS, the problem is pretty common. Switch to a better oil next time.
Again what oil are you using, & how much has it run?Originally posted by painreloaded View PostI am experiencing the same thing. Shifting from 1st to 2nd is a bit sluggish as the lever stops in neutral otherwise the shifting is smooth.
Did you go to the SVC with the issue? If no, go there & get it checked. Adjusting & oiling/greasing the gear lever solves the issue most of the times, as it did in my case.
We hope you are ok.Originally posted by pranjalshukla View Posthey friends,
you all guys are very helpful
. need your help again
i met up with a small accident couple of days back on my r15.
it was a rainy day i got slipped off the road. i was slow. only the right side of the bike is slightly damaged. i need to claim for the insurance. i do not know what to do next.
please help me what i do now to get the insurance claim.
it would be a great help. i also attach a pic of my damaged love
Check this thread: http://www.xbhp.com/talkies/pit-stop...e-company.html
(EDIT:
Another thread: http://www.xbhp.com/talkies/pit-stop-general-biking-discussion/9803-motor-vehicle-insurance-claims.html )
PS: Do some searching around on the forum before you post here. Most topics already exist.
Last edited by tibby; 07-26-2010, 12:53 PM.
My views on the YZF-R15 V2.0: http://www.xbhp.com/talkies/news/198...tml#post699240
The pleasure is when your rear wheel slides, and you bring it back; and when the front wheel lifts, you take your time bringing it back.
Comment
-
Aditaya,Originally posted by aditaya.chopra View Postguys using hid with projector i want to know how do you manage as i have heared battery drain so fast plz tell me as i am plaing to buy one pair for me
Can you share with us of your R15 (HID+Projector) pictures?
Comment
-
It isn't '09, it is '08.Originally posted by Prakritij View Postmay be its a 09 version. not sure.
RIDE SAFE
From a layman's prospective, the pre '09's have four projectors/ lamps compared to 2 for '09/'10.Last edited by sheelpriye; 07-26-2010, 08:15 PM.
Comment
-
the pre '09 r1 has 2 projector + 2 multi focal reflector headlamp assembly , not 4 projectors .Originally posted by sheelpriye View PostIt isn't '09, it is '08.
From a layman's prospective, the pre '09's have four projector lamps compared to 2 for '09/'10.Last edited by Puneet1; 07-26-2010, 08:25 PM.
Comment
-
tool source
Jd666 where can we get these tools from?I am interested,Originally posted by jd666 View PostHi guys, just got the pricing and listing for all special tools for FZ/R15/Gladiator/RX100 etc. so posting in the relevant threads if anyone needs help with sourcing the kits.
Here is the list of all tools for R15 -
1 YSST 701 MAGNETO HOLDER
2 YSST 702 MAGNETO PULLER
3 YSST 706 TAPPET SCREW HOLDER
4 YSST 706 A SOCKET 8MM
5 YSST 713 FRONT FORK INNER TUBE HOLDER
6 YSST 715 FEELER GAUGE
7 YSST 721 SOCKET STEERING NUT
8 YSST 722 PUNCH
9 YSST 723 WATER PUMP BEARING REMOVER
10 YSST 733 CLUTCH HUB HOLDER
11 YSST 775 FRONT FORK OUTER SEAL PUNCH
total kit 3.5k plus shipping.
thanks
Comment



Comment